Daihatsu Hijet MOT Results

Registered in 2003
49.1% pass rate
from 116 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2003 vans and highlighted areas where the Daihatsu Hijet is unusually good or bad.

  • 28% fail on Lamps, reflectors and electrical equipment
    • 11% fail on Headlamps (150% worse than other 2003 vans)
      • 11% fail on Headlamp (190% worse than other 2003 vans)
    • 10% fail on Front and rear fog lamps (200% worse than other 2003 vans)
      • 10% fail on Rear fog lamp (200% worse than other 2003 vans)
        • 10% fail on Rear fog lamp (200% worse than other 2003 vans)
    • 8.6% fail on Headlamp aim
      • 8.6% fail on Headlamp aim
    • 5.2% fail on Direction indicators
      • 5.2% fail on Flashing type
        • 5.2% fail on Individual direction indicators
        • 0.86% fail on Side repeaters
    • 4.3% fail on Registration plate lamp(s)
    • 3.4% fail on Electrical equipment
      • 1.7% fail on Horn
      • 0.86% fail on Electrical wiring
      • 0.86% fail on Battery(ies)
    • 2.6% fail on Stop lamp
    • 1.7% fail on Position lamps
      • 0.86% fail on All position lamps
      • 0.86% fail on Position lamp
  • 22% fail on Brakes
    • 15% fail on Brake performance
      • 11% fail on Service Brake Efficiency (sp) (110% worse than other 2003 vans)
        • 11% fail on Rbt (sp) (110% worse than other 2003 vans)
          • 8.6% fail on Service brake performance (170% worse than other 2003 vans)
          • 3.4% fail on Service brake imbalance
      • 7.8% fail on Service brake performance
        • 6.9% fail on Rbt
          • 6.9% fail on Service brake performance
          • 0.86% fail on Service brake imbalance
        • 0.86% fail on Plate brake tester
          • 0.86% fail on Service brake performance
      • 4.3% fail on Parking brake efficiency (sp)
        • 4.3% fail on Rbt (sp)
      • 0.86% fail on Parking brake performance
        • 0.86% fail on Rbt
          • 0.86% fail on Parking brake performance
    • 5.2% fail on Rigid brake pipes
    • 3.4% fail on Load sensing valves
    • 1.7% fail on Mechanical brake components
      • 0.86% fail on Brake linings and pads
        • 0.86% fail on Brake pads
      • 0.86% fail on Brake discs and drums
        • 0.86% fail on Brake discs
    • 0.86% fail on Service brake pedal or hand lever
      • 0.86% fail on Hand lever
  • 18% fail on Body, chassis, structure
    • 5.2% fail on Exhaust system
    • 5.2% fail on Fuel system (6 times worse than other 2003 vans)
      • 1.7% fail on Tank (6 times worse than other 2003 vans)
      • 1.7% fail on Fuel cap/sealing device (5 times worse than other 2003 vans)
      • 0.86% fail on Hose
      • 0.86% fail on System
    • 3.4% fail on Chassis
      • 3.4% fail on Chassis condition
    • 2.6% fail on Doors
      • 1.7% fail on Other passenger's door
        • 1.7% fail on Door condition
      • 0.86% fail on Driver's door
        • 0.86% fail on Door condition
    • 0.86% fail on Bumpers
    • 0.86% fail on Spare wheel
      • 0.86% fail on Carrier
    • 0.86% fail on Engine mounting
      • 0.86% fail on Engine mounting condition
    • 0.86% fail on Seats
      • 0.86% fail on Passenger's seat
    • 0.86% fail on Cabs
      • 0.86% fail on Prescribed areas
  • 13% fail on Noise, emissions and leaks (190% worse than other 2003 vans)
    • 13% fail on Exhaust emissions (2 times worse than other 2003 vans)
      • 13% fail on Spark ignition (17 times worse than other 2003 vans)
        • 5.2% fail on Catalyst emissions (17 times worse than other 2003 vans)
        • 3.4% fail on Malfunction indicator lamp (9 times worse than other 2003 vans)
        • 3.4% fail on Emissions not tested (20 times worse than other 2003 vans)
        • 0.86% fail on Non catalyst emissions
  • 11% fail on Visibility
    • 6.9% fail on Washers
    • 4.3% fail on Wipers
  • 9.5% fail on Suspension (54% better than other 2003 vans)
    • 4.3% fail on Component mounting prescribed areas
    • 3.4% fail on Springs
      • 1.7% fail on Spring mounting prescribed areas
      • 0.86% fail on Leaf springs
        • 0.86% fail on Leaf spring
      • 0.86% fail on Coil springs
        • 0.86% fail on Coil spring
    • 0.86% fail on Shock absorbers
    • 0.86% fail on Suspension arms
      • 0.86% fail on Ball joint dust cover
    • 0.86% fail on Sub-frames
      • 0.86% fail on Sub-frame mounting prescribed areas
  • 3.4% fail on Steering
    • 2.6% fail on Steering linkage components
      • 2.6% fail on Track rod end
    • 0.86% fail on Prescribed areas
  • 2.6% fail on Seat belts and supplementary restraint systems
    • 2.6% fail on Seat belts
      • 1.7% fail on Prescribed areas
      • 0.86% fail on Requirements
  • 2.6% fail on Tyres
    • 1.7% fail on Tread depth
    • 0.86% fail on Condition
  • 0.86% fail on Identification of the vehicle
    • 0.86% fail on Registration plates