MOT Results

Honest John Vans MOT Results » FIAT » Ducato » 1995

FIAT Ducato MOT Results

Registered in 1995
53.4% pass rate
from 356 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1995 vans and highlighted areas where the FIAT Ducato is unusually good or bad.

  • 22% fail on Lamps, reflectors and electrical equipment
    • 7.6% fail on Direction indicators (80% worse than other 1995 vans)
      • 7.6% fail on Flashing type (80% worse than other 1995 vans)
        • 3.9% fail on Individual direction indicators
        • 3.9% fail on Side repeaters (170% worse than other 1995 vans)
        • 0.28% fail on All direction indicators
        • 0.28% fail on Switch
    • 6.2% fail on Electrical equipment
      • 3.4% fail on Horn
      • 3.1% fail on Battery(ies)
      • 0.28% fail on Electrical wiring
    • 5.1% fail on Headlamp aim
      • 4.8% fail on Headlamp aim
      • 0.28% fail on Headlamp aim not tested
    • 3.4% fail on Headlamps
      • 3.1% fail on Headlamp
      • 0.28% fail on Headlamp levelling device
    • 3.4% fail on Stop lamp
    • 2.5% fail on Front and rear fog lamps
      • 2.5% fail on Rear fog lamp
        • 2.5% fail on Rear fog lamp
    • 2.2% fail on Registration plate lamp(s)
    • 0.84% fail on Hazard warning
      • 0.84% fail on Switch
    • 0.28% fail on Outline marker lamps
      • 0.28% fail on Outline marker lamp
    • 0.28% fail on Mandatory tell-tales
      • 0.28% fail on Main beam tell-tale
  • 18% fail on Visibility (60% worse than other 1995 vans)
    • 11% fail on Wipers (70% worse than other 1995 vans)
    • 8.7% fail on Washers (68% worse than other 1995 vans)
    • 0.28% fail on Bonnet
    • 0.28% fail on View to rear
      • 0.28% fail on Mirrors
  • 18% fail on Body, chassis, structure
    • 6.5% fail on Exhaust system
    • 4.8% fail on Integral vehicle structure
      • 4.8% fail on Integral vehicle structure condition
    • 3.9% fail on Chassis
      • 3.9% fail on Chassis condition
    • 2.8% fail on Transmission
      • 2.8% fail on Drive shafts
        • 2.8% fail on Joints
    • 0.84% fail on Body
      • 0.56% fail on Panel
      • 0.28% fail on Other body component
    • 0.56% fail on Doors
      • 0.28% fail on Driver's door
        • 0.28% fail on Door condition
      • 0.28% fail on Front passenger's door
        • 0.28% fail on Door condition
    • 0.56% fail on Seats
      • 0.28% fail on Driver's seat
      • 0.28% fail on Passenger's seat
    • 0.56% fail on Cabs
      • 0.28% fail on Steps
      • 0.28% fail on Prescribed areas
    • 0.28% fail on Bumpers
    • 0.28% fail on Engine mounting
      • 0.28% fail on Engine mounting condition
  • 16% fail on Brakes
    • 11% fail on Brake performance
      • 5.1% fail on Service brake performance
        • 5.1% fail on Rbt
          • 4.8% fail on Service brake performance
          • 0.56% fail on Service brake imbalance
      • 4.5% fail on Service Brake Efficiency (sp)
        • 4.5% fail on Rbt (sp)
          • 3.1% fail on Service brake performance
          • 1.7% fail on Service brake imbalance
      • 2.8% fail on Parking brake efficiency (sp)
        • 2.5% fail on Rbt (sp)
        • 0.28% fail on Decelerometer (sp)
      • 1.4% fail on Parking brake performance
        • 1.1% fail on Rbt
          • 1.1% fail on Parking brake performance
        • 0.28% fail on Plate brake tester
          • 0.28% fail on Parking brake performance
      • 0.84% fail on Brake performance not tested
    • 5.1% fail on Rigid brake pipes
    • 1.1% fail on Mechanical brake components
      • 0.84% fail on Brake discs and drums
        • 0.84% fail on Brake discs
      • 0.28% fail on Brake linings and pads
        • 0.28% fail on Brake pads
    • 0.56% fail on Service brake pedal or hand lever
      • 0.56% fail on Hand lever
    • 0.56% fail on Hydraulic systems
      • 0.28% fail on Reservoirs
      • 0.28% fail on Valves
    • 0.56% fail on Load sensing valves
    • 0.28% fail on Flexible brake hoses
    • 0.28% fail on Other components and prescribed areas
      • 0.28% fail on Prescribed areas
        • 0.28% fail on Master cylinder/servo mounting
  • 10% fail on Suspension (36% better than other 1995 vans)
    • 5.6% fail on Component mounting prescribed areas
    • 2.2% fail on Sub-frames
      • 2.2% fail on Sub-frame mounting prescribed areas
    • 1.7% fail on Shock absorbers
    • 1.4% fail on Suspension arms
      • 0.84% fail on Ball joint dust cover
      • 0.56% fail on Ball joint
    • 0.84% fail on Springs
      • 0.84% fail on Spring mounting prescribed areas
    • 0.56% fail on Other suspension component
      • 0.56% fail on Ball joint dust cover
    • 0.28% fail on Wheel bearings
    • 0.28% fail on Anti-roll bars
      • 0.28% fail on Attachment bracket and mounting
  • 6.2% fail on Noise, emissions and leaks
    • 5.1% fail on Exhaust emissions
      • 3.4% fail on Compression ignition
        • 1.7% fail on Pre 01/07/2008 Turbo (2 times worse than other 1995 vans)
        • 1.1% fail on Emissions not tested
        • 0.28% fail on Pre 01/07/2008 Non turbo
        • 0.28% fail on On or after 01/07/2008
        • 0.28% fail on On or after 01/01/2014
      • 1.7% fail on Spark ignition
        • 1.1% fail on Catalyst emissions
        • 0.28% fail on Non catalyst emissions
        • 0.28% fail on Emissions not tested
    • 1.4% fail on Fluid leaks
      • 1.4% fail on Engine oil leaks
  • 2.8% fail on Steering (53% better than other 1995 vans)
    • 1.4% fail on Steering linkage components
      • 1.1% fail on Track rod end
      • 0.28% fail on Ball joint
    • 1.4% fail on Power steering
      • 0.84% fail on Operation
      • 0.56% fail on Pipes and hoses
      • 0.56% fail on Other components
    • 0.28% fail on Steering gear
      • 0.28% fail on Steering rack
  • 2.5% fail on Seat belts and supplementary restraint systems
    • 2.5% fail on Seat belts
      • 2.0% fail on Prescribed areas
      • 0.28% fail on Requirements
      • 0.28% fail on Condition
  • 2.5% fail on Tyres
    • 2.0% fail on Condition
    • 0.56% fail on Tread depth
  • 0.84% fail on Identification of the vehicle
    • 0.56% fail on Registration plates
    • 0.28% fail on Vehicle Identification Number
  • 0.28% fail on Speedometer and speed limiter
    • 0.28% fail on Speedometer