MOT Results

Honest John Vans MOT Results » FIAT » Scudo » 1998

FIAT Scudo MOT Results

Registered in 1998
63.3% pass rate
from 60 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 vans and highlighted areas where the FIAT Scudo is unusually good or bad.

  • 22% fail on Suspension
    • 10% fail on Sub-frames (8 times worse than other 1998 vans)
      • 8.3% fail on Sub-frame (53 times worse than other 1998 vans)
      • 5.0% fail on Sub-frame mounting prescribed areas (4 times worse than other 1998 vans)
    • 6.7% fail on Suspension arms
      • 3.3% fail on Ball joint
      • 3.3% fail on Ball joint dust cover
    • 5.0% fail on Anti-roll bars
      • 3.3% fail on Anti-roll bar (56 times worse than other 1998 vans)
      • 1.7% fail on Linkage pins and bushes
    • 3.3% fail on Component mounting prescribed areas
    • 1.7% fail on Springs
      • 1.7% fail on Coil springs
        • 1.7% fail on Coil spring
  • 18% fail on Brakes
    • 12% fail on Brake performance
      • 10% fail on Service Brake Efficiency (sp)
        • 10% fail on Rbt (sp)
          • 6.7% fail on Service brake imbalance
          • 3.3% fail on Service brake performance
      • 8.3% fail on Service brake performance
        • 8.3% fail on Rbt
          • 8.3% fail on Service brake performance
      • 1.7% fail on Brake performance not tested
    • 3.3% fail on Rigid brake pipes
    • 3.3% fail on Load sensing valves
    • 3.3% fail on Mechanical brake components
      • 3.3% fail on Brake discs and drums
        • 3.3% fail on Brake discs
    • 1.7% fail on Flexible brake hoses
  • 17% fail on Lamps, reflectors and electrical equipment
    • 12% fail on Headlamp aim
      • 12% fail on Headlamp aim
    • 3.3% fail on Registration plate lamp(s)
    • 1.7% fail on Headlamps
      • 1.7% fail on Headlamp levelling device
    • 1.7% fail on Stop lamp
  • 12% fail on Body, chassis, structure
    • 3.3% fail on Chassis
      • 3.3% fail on Chassis condition
    • 3.3% fail on Exhaust system
    • 3.3% fail on Transmission
      • 3.3% fail on Drive shafts
        • 3.3% fail on Joints
    • 1.7% fail on Integral vehicle structure
      • 1.7% fail on Integral vehicle structure condition
    • 1.7% fail on Doors
      • 1.7% fail on Front passenger's door
        • 1.7% fail on Door condition
  • 5.0% fail on Steering
    • 3.3% fail on Steering gear
      • 3.3% fail on Steering rack
    • 1.7% fail on Steering linkage components
      • 1.7% fail on Track rod end
  • 5.0% fail on Visibility
    • 5.0% fail on Wipers
  • 1.7% fail on Noise, emissions and leaks
    • 1.7% fail on Exhaust emissions
      • 1.7% fail on Compression ignition
        • 1.7% fail on Pre 01/07/2008 Turbo