MOT Results

Honest John Vans MOT Results » IVECO » Daily » 2000

IVECO Daily MOT Results

Registered in 2000
48.4% pass rate
from 285 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 vans and highlighted areas where the IVECO Daily is unusually good or bad.

  • 33% fail on Brakes (78% worse than other 2000 vans)
    • 26% fail on Brake performance (120% worse than other 2000 vans)
      • 17% fail on Parking brake efficiency (sp) (2 times worse than other 2000 vans)
        • 17% fail on Rbt (sp) (2 times worse than other 2000 vans)
      • 13% fail on Service Brake Efficiency (sp) (110% worse than other 2000 vans)
        • 13% fail on Rbt (sp) (110% worse than other 2000 vans)
          • 9.8% fail on Service brake performance (170% worse than other 2000 vans)
          • 5.6% fail on Service brake imbalance
      • 11% fail on Service brake performance (100% worse than other 2000 vans)
        • 11% fail on Rbt (100% worse than other 2000 vans)
          • 8.8% fail on Service brake performance (99% worse than other 2000 vans)
          • 3.2% fail on Service brake imbalance
        • 0.35% fail on Plate brake tester
          • 0.35% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 3.5% fail on Parking brake performance
        • 3.2% fail on Rbt
          • 2.8% fail on Parking brake performance
          • 0.35% fail on Parking (secondary brake performance)
        • 0.35% fail on Plate brake tester
          • 0.35% fail on Parking brake performance
      • 1.4% fail on Brake performance not tested
    • 9.5% fail on Load sensing valves (3 times worse than other 2000 vans)
    • 6.0% fail on Rigid brake pipes
    • 5.6% fail on Mechanical brake components (98% worse than other 2000 vans)
      • 2.8% fail on Brake discs and drums (170% worse than other 2000 vans)
        • 2.5% fail on Brake discs
        • 0.35% fail on Brake drums
      • 2.5% fail on Brake linings and pads
        • 2.5% fail on Brake pads
      • 1.4% fail on Brake cables, rods, levers and linkages
        • 1.4% fail on Cable
    • 2.5% fail on Other components and prescribed areas (4 times worse than other 2000 vans)
      • 2.5% fail on Prescribed areas (5 times worse than other 2000 vans)
        • 1.8% fail on Master cylinder/servo mounting (28 times worse than other 2000 vans)
        • 0.70% fail on Other braking system component
    • 1.8% fail on Flexible brake hoses
    • 1.4% fail on Parking brake control
      • 1.4% fail on Lever
    • 1.1% fail on Service brake pedal or hand lever
      • 0.70% fail on Pedal
      • 0.35% fail on Hand lever
    • 0.35% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.35% fail on Hydraulic brake callipers
  • 27% fail on Lamps, reflectors and electrical equipment (32% worse than other 2000 vans)
    • 8.8% fail on Headlamps (98% worse than other 2000 vans)
      • 7.7% fail on Headlamp (96% worse than other 2000 vans)
      • 1.1% fail on Headlamp levelling device
      • 0.35% fail on Dipswitch
    • 7.7% fail on Registration plate lamp(s) (190% worse than other 2000 vans)
    • 6.3% fail on Front and rear fog lamps
      • 6.3% fail on Rear fog lamp
        • 6.3% fail on Rear fog lamp
    • 5.6% fail on Headlamp aim
      • 4.6% fail on Headlamp aim
      • 1.1% fail on Headlamp aim not tested
    • 5.6% fail on Direction indicators
      • 5.6% fail on Flashing type
        • 4.2% fail on Individual direction indicators
        • 2.5% fail on Side repeaters (170% worse than other 2000 vans)
    • 5.6% fail on Electrical equipment
      • 2.8% fail on Battery(ies) (2 times worse than other 2000 vans)
      • 2.5% fail on Horn
      • 0.70% fail on Electrical wiring
    • 4.6% fail on Stop lamp
    • 1.8% fail on Position lamps
      • 1.4% fail on Position lamp
      • 0.35% fail on Switch
    • 1.1% fail on Mandatory tell-tales (5 times worse than other 2000 vans)
      • 0.70% fail on Main beam tell-tale (10 times worse than other 2000 vans)
      • 0.35% fail on Rear fog lamp tell-tale
    • 0.35% fail on Hazard warning
      • 0.35% fail on Switch
  • 18% fail on Body, chassis, structure
    • 8.1% fail on Integral vehicle structure (120% worse than other 2000 vans)
      • 8.1% fail on Integral vehicle structure condition (130% worse than other 2000 vans)
    • 3.5% fail on Chassis
      • 3.5% fail on Chassis condition
    • 2.8% fail on Exhaust system
    • 2.5% fail on Body
      • 2.1% fail on Other body component (3 times worse than other 2000 vans)
      • 0.35% fail on Mounting fixings
    • 1.8% fail on Doors
      • 1.1% fail on Front passenger's door
        • 1.1% fail on Door condition
      • 0.35% fail on Driver's door
        • 0.35% fail on Door condition
      • 0.35% fail on Other passenger's door
        • 0.35% fail on Door condition
    • 1.4% fail on Cabs (2 times worse than other 2000 vans)
      • 1.4% fail on Prescribed areas (3 times worse than other 2000 vans)
    • 1.1% fail on Fuel system
      • 0.70% fail on Tank
      • 0.35% fail on Fuel cap/sealing device
    • 0.35% fail on Bumpers
    • 0.35% fail on Transmission
      • 0.35% fail on Prop shafts
        • 0.35% fail on Flexible couplings
    • 0.35% fail on Floor
    • 0.35% fail on Seats
      • 0.35% fail on Passenger's seat
    • 0.35% fail on Undertray
  • 18% fail on Suspension
    • 6.3% fail on Component mounting prescribed areas
    • 5.6% fail on Suspension arms
      • 2.5% fail on Ball joint
      • 2.5% fail on Ball joint dust cover
      • 0.70% fail on Pins and bushes
      • 0.35% fail on Suspension arm
    • 5.3% fail on Anti-roll bars
      • 2.1% fail on Linkage pins and bushes
      • 1.4% fail on Pins and bushes
      • 0.70% fail on Linkage
      • 0.70% fail on Linkage ball joints
      • 0.35% fail on Attachment bracket and mounting
      • 0.35% fail on Ball joint
      • 0.35% fail on Ball joint dust cover
    • 1.4% fail on Shock absorbers
    • 1.1% fail on Springs
      • 0.70% fail on Leaf springs
        • 0.35% fail on Leaf spring
        • 0.35% fail on Shackle pins and bushes
      • 0.35% fail on Spring mounting prescribed areas
    • 1.1% fail on Sub-frames
      • 0.70% fail on Sub-frame mounting prescribed areas
      • 0.35% fail on Sub-frame
    • 1.1% fail on Other suspension component
      • 1.1% fail on Ball joint
    • 0.35% fail on Suspension rods
      • 0.35% fail on Ball joint dust cover
  • 10% fail on Visibility
    • 6.0% fail on Wipers
    • 4.2% fail on Washers
    • 0.70% fail on Bonnet
    • 0.35% fail on View to rear
      • 0.35% fail on Mirrors
  • 4.6% fail on Seat belts and supplementary restraint systems
    • 4.6% fail on Seat belts
      • 3.2% fail on Prescribed areas
      • 1.8% fail on Condition
      • 0.35% fail on Requirements
  • 3.9% fail on Steering
    • 2.1% fail on Steering linkage components
      • 1.8% fail on Track rod end
      • 0.35% fail on Locking devices
    • 1.4% fail on Power steering
      • 0.70% fail on Other components
      • 0.35% fail on Operation
      • 0.35% fail on Pipes and hoses
    • 0.70% fail on Steering gear
      • 0.70% fail on Steering rack
    • 0.35% fail on Prescribed areas
  • 3.9% fail on Tyres
    • 1.8% fail on Condition
    • 1.1% fail on Size/type
    • 1.1% fail on Tread depth
  • 1.8% fail on Noise, emissions and leaks
    • 1.4% fail on Exhaust emissions
      • 1.1% fail on Compression ignition
        • 0.70% fail on Pre 01/07/2008 Turbo
        • 0.35% fail on Emissions not tested
      • 0.35% fail on Spark ignition
        • 0.35% fail on Catalyst emissions
        • 0.35% fail on Emissions not tested
    • 0.35% fail on Fluid leaks
      • 0.35% fail on Engine oil leaks
  • 1.4% fail on Identification of the vehicle
    • 1.4% fail on Registration plates
  • 0.70% fail on Road Wheels
    • 0.35% fail on Condition
    • 0.35% fail on Attachment