MOT Results

Honest John Vans MOT Results » IVECO » Daily » 2012

IVECO Daily MOT Results

Registered in 2012
54.6% pass rate
from 2,103 tests in 2021
(11% worse than other 2012 vans)
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the IVECO Daily is unusually good or bad.

  • 26% fail on Lamps, reflectors and electrical equipment (40% worse than other 2012 vans)
    • 7.7% fail on Registration plate lamp(s) (26% worse than other 2012 vans)
    • 6.5% fail on Headlamp aim (81% worse than other 2012 vans)
      • 5.5% fail on Headlamp aim (70% worse than other 2012 vans)
      • 0.95% fail on Headlamp aim not tested (160% worse than other 2012 vans)
    • 6.2% fail on Direction indicators (120% worse than other 2012 vans)
      • 6.2% fail on Flashing type (120% worse than other 2012 vans)
        • 3.5% fail on Side repeaters (3 times worse than other 2012 vans)
        • 3.1% fail on Individual direction indicators (56% worse than other 2012 vans)
        • 0.095% fail on All direction indicators
    • 5.9% fail on Headlamps (80% worse than other 2012 vans)
      • 5.8% fail on Headlamp (88% worse than other 2012 vans)
      • 0.095% fail on Headlamp levelling device
    • 5.2% fail on Stop lamp
    • 3.9% fail on Front and rear fog lamps (110% worse than other 2012 vans)
      • 3.9% fail on Rear fog lamp (110% worse than other 2012 vans)
        • 3.9% fail on Rear fog lamp (110% worse than other 2012 vans)
    • 2.5% fail on Electrical equipment (2 times worse than other 2012 vans)
      • 1.00% fail on Horn (120% worse than other 2012 vans)
      • 0.67% fail on Battery(ies) (5 times worse than other 2012 vans)
      • 0.48% fail on Trailer electrical socket (4 times worse than other 2012 vans)
      • 0.33% fail on Electrical wiring (3 times worse than other 2012 vans)
    • 1.0% fail on Reversing lamps
      • 1.00% fail on Reversing lamps
      • 0.048% fail on Reversing lamp switch
    • 0.57% fail on Position lamps
      • 0.57% fail on Position lamp
    • 0.38% fail on Hazard warning
      • 0.38% fail on Switch
    • 0.33% fail on Rear reflectors
    • 0.29% fail on Outline marker lamps (7 times worse than other 2012 vans)
      • 0.24% fail on Outline marker lamp (5 times worse than other 2012 vans)
      • 0.048% fail on All outline marker lamps
  • 22% fail on Brakes (71% worse than other 2012 vans)
    • 16% fail on Brake performance (140% worse than other 2012 vans)
      • 13% fail on Parking brake efficiency (sp) (190% worse than other 2012 vans)
        • 13% fail on Rbt (sp) (190% worse than other 2012 vans)
        • 0.048% fail on Plate brake tester (sp)
      • 5.0% fail on Parking brake performance (2 times worse than other 2012 vans)
        • 4.9% fail on Rbt (2 times worse than other 2012 vans)
          • 4.5% fail on Parking brake performance (2 times worse than other 2012 vans)
          • 0.43% fail on Parking (secondary brake performance) (2 times worse than other 2012 vans)
          • 0.048% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
        • 0.048% fail on Plate brake tester
          • 0.048% fail on Parking brake performance
      • 4.2% fail on Service brake performance (130% worse than other 2012 vans)
        • 4.1% fail on Rbt (130% worse than other 2012 vans)
          • 3.1% fail on Service brake performance (110% worse than other 2012 vans)
          • 1.4% fail on Service brake imbalance (2 times worse than other 2012 vans)
        • 0.095% fail on Decelerometer (6 times worse than other 2012 vans)
          • 0.095% fail on Service brake performance (6 times worse than other 2012 vans)
        • 0.048% fail on Plate brake tester
          • 0.048% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 1.8% fail on Service Brake Efficiency (sp) (120% worse than other 2012 vans)
        • 1.8% fail on Rbt (sp) (120% worse than other 2012 vans)
          • 1.1% fail on Service brake imbalance (2 times worse than other 2012 vans)
          • 0.95% fail on Service brake performance (82% worse than other 2012 vans)
        • 0.048% fail on Plate brake tester (sp)
          • 0.048% fail on Service brake imbalance
      • 0.29% fail on Brake performance not tested
    • 5.9% fail on ABS / EBS / ESC (4 times worse than other 2012 vans)
      • 5.2% fail on Anti-lock braking system (4 times worse than other 2012 vans)
      • 3.0% fail on Electronic stability control (5 times worse than other 2012 vans)
    • 3.9% fail on Mechanical brake components
      • 2.5% fail on Brake linings and pads
        • 2.5% fail on Brake pads
        • 0.048% fail on Brake linings
      • 1.00% fail on Brake discs and drums
        • 1.00% fail on Brake discs
        • 0.048% fail on Brake drums
      • 0.90% fail on Brake cables, rods, levers and linkages (2 times worse than other 2012 vans)
        • 0.67% fail on Cable (2 times worse than other 2012 vans)
        • 0.24% fail on Lever (2 times worse than other 2012 vans)
        • 0.048% fail on Linkage
        • 0.048% fail on Brake slack adjuster
    • 1.1% fail on Brake actuators (including spring brakes or hydraulic cylinders) (4 times worse than other 2012 vans)
      • 1.00% fail on Hydraulic brake callipers (5 times worse than other 2012 vans)
      • 0.095% fail on Hydraulic brake cylinder
    • 0.86% fail on Parking brake control
      • 0.86% fail on Lever
    • 0.62% fail on Service brake pedal or hand lever
      • 0.57% fail on Pedal
      • 0.095% fail on Hand lever
    • 0.43% fail on Flexible brake hoses
    • 0.24% fail on Rigid brake pipes (92% better than other 2012 vans)
    • 0.095% fail on Other components and prescribed areas
      • 0.048% fail on Other components
      • 0.048% fail on Prescribed areas
        • 0.048% fail on Master cylinder/servo mounting
    • 0.048% fail on Air and vacuum systems
      • 0.048% fail on Servos
    • 0.048% fail on Pressure storage reservoirs
      • 0.048% fail on Air and vacuum systems
    • 0.048% fail on Hydraulic systems
      • 0.048% fail on Brake fluid
    • 0.048% fail on Load sensing valves
  • 15% fail on Suspension
    • 6.7% fail on Anti-roll bars (36% worse than other 2012 vans)
      • 3.9% fail on Pins and bushes (3 times worse than other 2012 vans)
      • 2.5% fail on Linkage pins and bushes (3 times worse than other 2012 vans)
      • 1.00% fail on Linkage (2 times worse than other 2012 vans)
      • 0.43% fail on Attachment bracket and mounting (11 times worse than other 2012 vans)
      • 0.38% fail on Anti-roll bar (6 times worse than other 2012 vans)
      • 0.095% fail on Linkage ball joints (95% better than other 2012 vans)
      • 0.095% fail on Linkage attachment bracket and mounting (5 times worse than other 2012 vans)
      • 0.048% fail on Ball joint
    • 5.5% fail on Suspension arms
      • 3.7% fail on Ball joint (56% worse than other 2012 vans)
      • 1.8% fail on Pins and bushes
      • 0.52% fail on Ball joint dust cover
      • 0.048% fail on Attachment bracket and mounting
    • 4.0% fail on Springs
      • 4.0% fail on Leaf springs (4 times worse than other 2012 vans)
        • 1.9% fail on Shackle pins and bushes (23 times worse than other 2012 vans)
        • 1.1% fail on Fixings and fixing bolts (10 times worse than other 2012 vans)
        • 0.71% fail on Anchor pins and bushes (16 times worse than other 2012 vans)
        • 0.29% fail on Leaf spring
        • 0.14% fail on Spring saddle (9 times worse than other 2012 vans)
        • 0.14% fail on Shackle bracket (7 times worse than other 2012 vans)
    • 0.86% fail on Shock absorbers
    • 0.81% fail on Sub-frames (7 times worse than other 2012 vans)
      • 0.67% fail on Sub-frame (34 times worse than other 2012 vans)
      • 0.14% fail on Attachment bracket and mounting (16 times worse than other 2012 vans)
      • 0.048% fail on Sub-frame mounting prescribed areas
    • 0.67% fail on Other suspension component
      • 0.43% fail on Ball joint
      • 0.14% fail on Other suspension component (10 times worse than other 2012 vans)
      • 0.095% fail on Attachment bracket and mounting (5 times worse than other 2012 vans)
      • 0.048% fail on Ball joint dust cover
    • 0.48% fail on Wheel bearings (62% better than other 2012 vans)
    • 0.29% fail on Component mounting prescribed areas
    • 0.24% fail on Axles (3 times worse than other 2012 vans)
      • 0.24% fail on Axle (13 times worse than other 2012 vans)
  • 9.8% fail on Visibility (31% worse than other 2012 vans)
    • 5.0% fail on Wipers (44% worse than other 2012 vans)
    • 3.7% fail on Washers
    • 1.3% fail on View to rear (120% worse than other 2012 vans)
      • 1.3% fail on Mirrors (120% worse than other 2012 vans)
    • 0.43% fail on Condition of glass
      • 0.43% fail on Windscreen
    • 0.38% fail on Bonnet (170% worse than other 2012 vans)
  • 6.4% fail on Body, chassis, structure
    • 2.3% fail on Exhaust system (140% worse than other 2012 vans)
    • 1.2% fail on Body (2 times worse than other 2012 vans)
      • 0.57% fail on Mounting fixings (34 times worse than other 2012 vans)
      • 0.43% fail on Other body component
      • 0.095% fail on Panel
      • 0.048% fail on Body condition
      • 0.048% fail on Pillar
    • 0.90% fail on Transmission (78% better than other 2012 vans)
      • 0.86% fail on Prop shafts (140% worse than other 2012 vans)
        • 0.62% fail on Prop shaft (5 times worse than other 2012 vans)
        • 0.14% fail on Flexible couplings (6 times worse than other 2012 vans)
        • 0.095% fail on Joints
      • 0.048% fail on Halfshafts
    • 0.57% fail on Fuel system
      • 0.43% fail on Fuel cap/sealing device
      • 0.048% fail on Tank
      • 0.048% fail on Hose
      • 0.048% fail on Pipe
    • 0.48% fail on Doors
      • 0.29% fail on Driver's door (2 times worse than other 2012 vans)
        • 0.29% fail on Door condition (3 times worse than other 2012 vans)
      • 0.19% fail on Other passenger's door
        • 0.14% fail on Door condition
        • 0.048% fail on Catch
      • 0.095% fail on Front passenger's door
        • 0.095% fail on Door condition
    • 0.38% fail on Integral vehicle structure (2 times worse than other 2012 vans)
      • 0.19% fail on Sub-frame (61 times worse than other 2012 vans)
        • 0.19% fail on Sub-frame condition (74 times worse than other 2012 vans)
      • 0.19% fail on Integral vehicle structure condition
    • 0.38% fail on Chassis (3 times worse than other 2012 vans)
      • 0.38% fail on Chassis condition (4 times worse than other 2012 vans)
    • 0.29% fail on Load security (6 times worse than other 2012 vans)
      • 0.19% fail on Loading door (7 times worse than other 2012 vans)
      • 0.048% fail on Tailgate
      • 0.048% fail on Dropside
        • 0.048% fail on Dropside condition
    • 0.19% fail on Bumpers
    • 0.19% fail on Seats
      • 0.14% fail on Driver's seat
      • 0.048% fail on Passenger's seat
    • 0.14% fail on Floor (30 times worse than other 2012 vans)
    • 0.048% fail on Towbar
      • 0.048% fail on Safety device
  • 6.4% fail on Noise, emissions and leaks (36% worse than other 2012 vans)
    • 6.0% fail on Exhaust emissions (38% worse than other 2012 vans)
      • 4.8% fail on Compression ignition (37% worse than other 2012 vans)
        • 2.9% fail on Malfunction indicator lamp (41% worse than other 2012 vans)
        • 1.0% fail on On or after 01/07/2008
        • 0.71% fail on Emissions not tested (130% worse than other 2012 vans)
        • 0.24% fail on Pre 01/07/2008 Non turbo (10 times worse than other 2012 vans)
        • 0.095% fail on Pre 01/07/2008 Turbo
      • 1.3% fail on Spark ignition
        • 1.2% fail on Malfunction indicator lamp
        • 0.048% fail on Catalyst emissions
        • 0.048% fail on Emissions not tested
    • 0.48% fail on Fluid leaks
      • 0.33% fail on Engine oil leaks
      • 0.095% fail on Transmission oil leaks
      • 0.048% fail on Other leaks
  • 5.9% fail on Tyres
    • 3.4% fail on Condition (38% worse than other 2012 vans)
    • 2.7% fail on Tread depth
    • 0.38% fail on Size/type
  • 4.5% fail on Seat belts and supplementary restraint systems (180% worse than other 2012 vans)
    • 3.4% fail on SRS malfunction indicator lamp (3 times worse than other 2012 vans)
    • 1.0% fail on Seat belts
      • 0.90% fail on Condition
      • 0.095% fail on Prescribed areas
      • 0.048% fail on Pre-tensioners
    • 0.19% fail on Airbags (9 times worse than other 2012 vans)
      • 0.19% fail on Drivers airbag (10 times worse than other 2012 vans)
  • 2.5% fail on Steering (36% better than other 2012 vans)
    • 2.0% fail on Steering linkage components (39% better than other 2012 vans)
      • 1.9% fail on Track rod end (40% better than other 2012 vans)
      • 0.14% fail on Ball joint
      • 0.048% fail on Drag link end
    • 0.19% fail on Steering gear
      • 0.14% fail on Steering rack
      • 0.048% fail on Operation
    • 0.14% fail on Power steering
      • 0.048% fail on Operation
      • 0.048% fail on Pipes and hoses
      • 0.048% fail on Other components
    • 0.095% fail on Prescribed areas (61 times worse than other 2012 vans)
    • 0.048% fail on Steering wheel
    • 0.048% fail on Steering column
    • 0.048% fail on Electronic power steering
  • 0.76% fail on Identification of the vehicle
    • 0.76% fail on Registration plates
  • 0.33% fail on Road Wheels
    • 0.33% fail on Attachment