MOT Results

Honest John Vans MOT Results » Mitsubishi » L200 » 1995

Mitsubishi L200 MOT Results

Registered in 1995
50.0% pass rate
from 40 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1995 vans and highlighted areas where the Mitsubishi L200 is unusually good or bad.

  • 25% fail on Suspension
    • 10% fail on Component mounting prescribed areas
    • 7.5% fail on Springs
      • 5.0% fail on Leaf springs (10 times worse than other 1995 vans)
        • 5.0% fail on Shackle pins and bushes (24 times worse than other 1995 vans)
      • 2.5% fail on Spring mounting prescribed areas
    • 5.0% fail on Shock absorbers
    • 5.0% fail on Anti-roll bars
      • 5.0% fail on Pins and bushes (8 times worse than other 1995 vans)
    • 2.5% fail on Suspension arms
      • 2.5% fail on Ball joint
    • 2.5% fail on Other suspension component
      • 2.5% fail on Ball joint
  • 20% fail on Brakes
    • 13% fail on Brake performance
      • 5.0% fail on Service brake performance
        • 5.0% fail on Rbt
          • 5.0% fail on Service brake performance
      • 5.0% fail on Parking brake efficiency (sp)
        • 5.0% fail on Rbt (sp)
      • 2.5% fail on Service Brake Efficiency (sp)
        • 2.5% fail on Rbt (sp)
          • 2.5% fail on Service brake performance
      • 2.5% fail on Parking brake performance
        • 2.5% fail on Rbt
          • 2.5% fail on Parking brake performance
    • 7.5% fail on Rigid brake pipes
    • 2.5% fail on Service brake pedal or hand lever
      • 2.5% fail on Hand lever
    • 2.5% fail on Hydraulic systems
      • 2.5% fail on Valves
  • 20% fail on Body, chassis, structure
    • 10% fail on Exhaust system
    • 7.5% fail on Chassis
      • 7.5% fail on Chassis condition
    • 5.0% fail on Integral vehicle structure
      • 5.0% fail on Integral vehicle structure condition
    • 5.0% fail on Body
      • 2.5% fail on Panel
      • 2.5% fail on Other body component
    • 2.5% fail on Transmission
      • 2.5% fail on Drive shafts
        • 2.5% fail on Joints
    • 2.5% fail on Seats
      • 2.5% fail on Driver's seat
      • 2.5% fail on Passenger's seat
  • 15% fail on Steering
    • 13% fail on Steering linkage components (3 times worse than other 1995 vans)
      • 5.0% fail on Track rod end
      • 2.5% fail on Ball joint
      • 2.5% fail on Intermediate drop arm
      • 2.5% fail on Locking devices
    • 2.5% fail on Steering gear
      • 2.5% fail on Steering box
    • 2.5% fail on Power steering
      • 2.5% fail on Operation
      • 2.5% fail on Other components
  • 15% fail on Visibility
    • 10% fail on Wipers
    • 10% fail on Washers
  • 15% fail on Lamps, reflectors and electrical equipment
    • 5.0% fail on Front and rear fog lamps
      • 5.0% fail on Rear fog lamp
        • 5.0% fail on Rear fog lamp
    • 5.0% fail on Electrical equipment
      • 2.5% fail on Electrical wiring
      • 2.5% fail on Battery(ies)
      • 2.5% fail on Horn
    • 2.5% fail on Headlamps
      • 2.5% fail on Headlamp
    • 2.5% fail on Headlamp aim
      • 2.5% fail on Headlamp aim
    • 2.5% fail on Stop lamp
    • 2.5% fail on Registration plate lamp(s)
  • 5.0% fail on Tyres
    • 2.5% fail on Size/type
    • 2.5% fail on Tread depth
  • 2.5% fail on Identification of the vehicle
    • 2.5% fail on Registration plates
  • 2.5% fail on Noise, emissions and leaks
    • 2.5% fail on Exhaust emissions
      • 2.5% fail on Compression ignition
        • 2.5% fail on Emissions not tested