Mitsubishi L200 MOT Results

Registered in 2000
53.8% pass rate
from 457 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 vans and highlighted areas where the Mitsubishi L200 is unusually good or bad.

  • 25% fail on Lamps, reflectors and electrical equipment
    • 7.9% fail on Front and rear fog lamps (83% worse than other 2000 vans)
      • 7.9% fail on Rear fog lamp (83% worse than other 2000 vans)
        • 7.9% fail on Rear fog lamp (83% worse than other 2000 vans)
    • 7.4% fail on Stop lamp (63% worse than other 2000 vans)
    • 4.6% fail on Headlamp aim
      • 4.2% fail on Headlamp aim
      • 0.44% fail on Headlamp aim not tested
    • 4.4% fail on Direction indicators
      • 4.4% fail on Flashing type
        • 3.1% fail on Individual direction indicators
        • 0.88% fail on Side repeaters
        • 0.44% fail on All direction indicators
    • 3.9% fail on Headlamps
      • 3.5% fail on Headlamp
      • 0.44% fail on Headlamp levelling device
      • 0.22% fail on Dipswitch
    • 3.3% fail on Rear reflectors (7 times worse than other 2000 vans)
    • 2.2% fail on Position lamps (2 times worse than other 2000 vans)
      • 2.2% fail on Position lamp (2 times worse than other 2000 vans)
    • 2.0% fail on Registration plate lamp(s)
    • 1.3% fail on Electrical equipment
      • 0.88% fail on Battery(ies)
      • 0.44% fail on Trailer electrical socket
      • 0.22% fail on Electrical wiring
      • 0.22% fail on Horn
    • 0.44% fail on Hazard warning
      • 0.44% fail on Switch
    • 0.44% fail on Mandatory tell-tales
      • 0.44% fail on Main beam tell-tale (6 times worse than other 2000 vans)
  • 21% fail on Body, chassis, structure (37% worse than other 2000 vans)
    • 9.8% fail on Transmission (140% worse than other 2000 vans)
      • 5.7% fail on Prop shafts (4 times worse than other 2000 vans)
        • 3.1% fail on Prop shaft (4 times worse than other 2000 vans)
        • 1.5% fail on Joints (5 times worse than other 2000 vans)
        • 0.66% fail on Flexible couplings (3 times worse than other 2000 vans)
        • 0.44% fail on Bearing housing (5 times worse than other 2000 vans)
      • 4.8% fail on Drive shafts
        • 4.6% fail on Joints
        • 0.22% fail on Flexible couplings
    • 7.4% fail on Exhaust system (87% worse than other 2000 vans)
    • 3.7% fail on Chassis
      • 3.7% fail on Chassis condition
      • 0.22% fail on Strengthening plate
    • 3.5% fail on Integral vehicle structure
      • 3.3% fail on Integral vehicle structure condition
      • 0.22% fail on Strengthening plate
    • 2.0% fail on Body
      • 1.5% fail on Panel (2 times worse than other 2000 vans)
      • 0.66% fail on Mounting fixings (5 times worse than other 2000 vans)
      • 0.22% fail on Body condition
    • 1.8% fail on Fuel system
      • 1.3% fail on Pipe (6 times worse than other 2000 vans)
      • 0.22% fail on Tank
      • 0.22% fail on Fuel cap/sealing device
    • 0.88% fail on Cabs
      • 0.88% fail on Prescribed areas
    • 0.66% fail on Bumpers
    • 0.22% fail on Spare wheel
      • 0.22% fail on Spare wheel condition
    • 0.22% fail on Load security
      • 0.22% fail on Tailgate
        • 0.22% fail on Tailgate condition
    • 0.22% fail on Seats
      • 0.22% fail on Driver's seat
  • 20% fail on Suspension
    • 8.1% fail on Component mounting prescribed areas
    • 5.7% fail on Springs (110% worse than other 2000 vans)
      • 5.0% fail on Leaf springs (5 times worse than other 2000 vans)
        • 2.4% fail on Leaf spring (5 times worse than other 2000 vans)
        • 2.0% fail on Shackle pins and bushes (7 times worse than other 2000 vans)
        • 1.1% fail on Fixings and fixing bolts (13 times worse than other 2000 vans)
        • 0.66% fail on Anchor pins and bushes (10 times worse than other 2000 vans)
        • 0.22% fail on Anchor bracket
        • 0.22% fail on Shackle bracket
      • 0.66% fail on Spring mounting prescribed areas
    • 5.3% fail on Anti-roll bars (86% worse than other 2000 vans)
      • 4.4% fail on Pins and bushes (3 times worse than other 2000 vans)
      • 0.88% fail on Linkage pins and bushes
      • 0.22% fail on Attachment bracket and mounting
    • 4.2% fail on Suspension arms
      • 3.1% fail on Ball joint
      • 1.3% fail on Ball joint dust cover
      • 0.22% fail on Pins and bushes
    • 2.6% fail on Shock absorbers (2 times worse than other 2000 vans)
    • 2.2% fail on Wheel bearings
    • 0.88% fail on Sub-frames
      • 0.44% fail on Sub-frame
      • 0.44% fail on Sub-frame mounting prescribed areas
    • 0.22% fail on Other suspension component
      • 0.22% fail on Ball joint dust cover
  • 18% fail on Brakes
    • 7.9% fail on Brake performance (36% better than other 2000 vans)
      • 5.3% fail on Service Brake Efficiency (sp)
        • 5.0% fail on Rbt (sp)
          • 3.5% fail on Service brake performance
          • 3.1% fail on Service brake imbalance
        • 0.22% fail on Decelerometer (sp)
      • 4.8% fail on Service brake performance
        • 4.8% fail on Rbt
          • 3.9% fail on Service brake performance
          • 1.8% fail on Service brake imbalance
      • 1.5% fail on Parking brake efficiency (sp) (67% better than other 2000 vans)
        • 1.3% fail on Rbt (sp) (71% better than other 2000 vans)
        • 0.22% fail on Decelerometer (sp)
      • 0.44% fail on Parking brake performance
        • 0.44% fail on Rbt
          • 0.44% fail on Parking brake performance
    • 6.6% fail on Rigid brake pipes
    • 2.8% fail on Mechanical brake components
      • 2.2% fail on Brake linings and pads
        • 2.2% fail on Brake pads
      • 0.66% fail on Brake discs and drums
        • 0.66% fail on Brake discs
    • 2.4% fail on Other components and prescribed areas (4 times worse than other 2000 vans)
      • 2.2% fail on Prescribed areas (5 times worse than other 2000 vans)
        • 1.1% fail on Other braking system component (4 times worse than other 2000 vans)
        • 0.66% fail on Master cylinder/servo mounting (10 times worse than other 2000 vans)
        • 0.44% fail on Actuating linkage mounting (14 times worse than other 2000 vans)
      • 0.22% fail on Other components
    • 1.5% fail on Load sensing valves
    • 0.88% fail on Service brake pedal or hand lever
      • 0.66% fail on Pedal
      • 0.22% fail on Hand lever
    • 0.44% fail on Hydraulic systems
      • 0.22% fail on Brake fluid
      • 0.22% fail on Valves
    • 0.22% fail on Parking brake control
      • 0.22% fail on Lever
    • 0.22% fail on Flexible brake hoses
    • 0.22% fail on ABS / EBS / ESC
      • 0.22% fail on Anti-lock braking system
  • 12% fail on Visibility
    • 6.3% fail on Wipers
    • 5.7% fail on Washers
    • 0.44% fail on Condition of glass
      • 0.44% fail on Windscreen
    • 0.22% fail on Bonnet
  • 8.5% fail on Steering
    • 7.2% fail on Steering linkage components (88% worse than other 2000 vans)
      • 5.0% fail on Track rod end
      • 1.8% fail on Ball joint (3 times worse than other 2000 vans)
      • 0.66% fail on Drag link end
      • 0.44% fail on Intermediate drop arm (10 times worse than other 2000 vans)
      • 0.22% fail on Steering arm
      • 0.22% fail on Other components
        • 0.22% fail on Steering linkage
      • 0.22% fail on Locking devices
    • 0.66% fail on Steering gear
      • 0.44% fail on Steering box (14 times worse than other 2000 vans)
      • 0.22% fail on Operation
    • 0.44% fail on Power steering
      • 0.22% fail on Operation
      • 0.22% fail on Other components
    • 0.22% fail on Steering play
      • 0.22% fail on Steering box
  • 4.4% fail on Noise, emissions and leaks
    • 2.6% fail on Exhaust emissions
      • 2.4% fail on Compression ignition
        • 1.1% fail on Pre 01/07/2008 Turbo
        • 1.1% fail on Emissions not tested
        • 0.22% fail on Pre 01/07/2008 Non turbo
        • 0.22% fail on On or after 01/07/2008
        • 0.22% fail on On or after 01/01/2014
      • 0.22% fail on Spark ignition
        • 0.22% fail on Catalyst emissions
    • 1.8% fail on Fluid leaks
      • 1.5% fail on Engine oil leaks
      • 0.22% fail on Other leaks
  • 3.7% fail on Tyres
    • 2.8% fail on Tread depth
    • 0.66% fail on Condition
    • 0.44% fail on Size/type
  • 2.2% fail on Seat belts and supplementary restraint systems
    • 1.5% fail on Seat belts (59% better than other 2000 vans)
      • 0.88% fail on Condition
      • 0.44% fail on Prescribed areas (85% better than other 2000 vans)
      • 0.22% fail on Attachment
    • 0.66% fail on SRS malfunction indicator lamp
  • 0.66% fail on Identification of the vehicle
    • 0.66% fail on Registration plates
  • 0.22% fail on Road Wheels
    • 0.22% fail on Attachment