Nissan Cabstar MOT Results

Registered in 1996
60.5% pass rate
from 38 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 vans and highlighted areas where the Nissan Cabstar is unusually good or bad.

  • 24% fail on Brakes
    • 16% fail on Brake performance
      • 11% fail on Service Brake Efficiency (sp)
        • 11% fail on Rbt (sp)
          • 7.9% fail on Service brake imbalance
          • 5.3% fail on Service brake performance
      • 7.9% fail on Parking brake efficiency (sp)
        • 7.9% fail on Rbt (sp)
      • 5.3% fail on Service brake performance
        • 2.6% fail on Rbt
          • 2.6% fail on Service brake performance
          • 2.6% fail on Service brake imbalance
        • 2.6% fail on Plate brake tester
          • 2.6% fail on Service brake performance
    • 13% fail on Rigid brake pipes (2 times worse than other 1996 vans)
  • 24% fail on Lamps, reflectors and electrical equipment
    • 7.9% fail on Headlamps
      • 7.9% fail on Headlamp
    • 7.9% fail on Front and rear fog lamps
      • 7.9% fail on Rear fog lamp
        • 7.9% fail on Rear fog lamp
    • 5.3% fail on Headlamp aim
      • 5.3% fail on Headlamp aim
    • 5.3% fail on Stop lamp
    • 5.3% fail on Direction indicators
      • 5.3% fail on Flashing type
        • 5.3% fail on Individual direction indicators
    • 2.6% fail on Position lamps
      • 2.6% fail on Position lamp
    • 2.6% fail on Rear reflectors
    • 2.6% fail on Electrical equipment
      • 2.6% fail on Horn
  • 16% fail on Body, chassis, structure
    • 7.9% fail on Body (8 times worse than other 1996 vans)
      • 2.6% fail on Body condition
      • 2.6% fail on Mounting fixings
      • 2.6% fail on Other body component
    • 5.3% fail on Cabs (10 times worse than other 1996 vans)
      • 5.3% fail on Prescribed areas (11 times worse than other 1996 vans)
    • 2.6% fail on Exhaust system
    • 2.6% fail on Fuel system
      • 2.6% fail on Fuel cap/sealing device
    • 2.6% fail on Load security
      • 2.6% fail on Dropside
        • 2.6% fail on Dropside condition
    • 2.6% fail on Seats
      • 2.6% fail on Driver's seat
  • 13% fail on Visibility
    • 11% fail on Washers
    • 5.3% fail on Wipers
  • 11% fail on Suspension
    • 5.3% fail on Suspension arms
      • 5.3% fail on Ball joint dust cover
    • 2.6% fail on Wheel bearings
    • 2.6% fail on Shock absorbers
  • 7.9% fail on Steering
    • 5.3% fail on Steering linkage components
      • 2.6% fail on Drag link end
      • 2.6% fail on Track rod end
    • 2.6% fail on Power steering
      • 2.6% fail on Operation
  • 5.3% fail on Seat belts and supplementary restraint systems
    • 5.3% fail on Seat belts
      • 5.3% fail on Prescribed areas
  • 2.6% fail on Identification of the vehicle
    • 2.6% fail on Registration plates