MOT Results

Honest John Vans MOT Results » Peugeot » Boxer » 2012

Peugeot Boxer MOT Results

Registered in 2012
73.8% pass rate
from 3,589 tests in 2021
(38% better than other 2012 vans)
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Peugeot Boxer is unusually good or bad.

  • 12% fail on Lamps, reflectors and electrical equipment (34% better than other 2012 vans)
    • 4.6% fail on Headlamp aim (28% worse than other 2012 vans)
      • 4.3% fail on Headlamp aim (32% worse than other 2012 vans)
      • 0.36% fail on Headlamp aim not tested
    • 3.1% fail on Direction indicators
      • 3.1% fail on Flashing type
        • 1.8% fail on Individual direction indicators
        • 1.6% fail on Side repeaters (89% worse than other 2012 vans)
        • 0.028% fail on Switch
    • 2.8% fail on Headlamps
      • 2.3% fail on Headlamp (27% better than other 2012 vans)
      • 0.50% fail on Headlamp levelling device (170% worse than other 2012 vans)
      • 0.028% fail on Dipswitch
    • 2.5% fail on Registration plate lamp(s) (60% better than other 2012 vans)
    • 1.7% fail on Stop lamp (69% better than other 2012 vans)
    • 0.92% fail on Front and rear fog lamps (49% better than other 2012 vans)
      • 0.92% fail on Rear fog lamp (49% better than other 2012 vans)
        • 0.92% fail on Rear fog lamp (49% better than other 2012 vans)
    • 0.45% fail on Reversing lamps
      • 0.45% fail on Reversing lamps
      • 0.028% fail on Reversing lamp switch
    • 0.45% fail on Electrical equipment
      • 0.31% fail on Horn
      • 0.11% fail on Electrical wiring
      • 0.028% fail on Trailer electrical socket
    • 0.17% fail on Position lamps
      • 0.17% fail on Position lamp
    • 0.028% fail on Outline marker lamps
      • 0.028% fail on Outline marker lamp
    • 0.028% fail on Hazard warning
      • 0.028% fail on Switch
    • 0.028% fail on Rear reflectors
  • 8.1% fail on Brakes (37% better than other 2012 vans)
    • 6.2% fail on Brake performance
      • 5.0% fail on Parking brake efficiency (sp)
        • 5.0% fail on Rbt (sp)
        • 0.056% fail on Plate brake tester (sp)
        • 0.028% fail on Decelerometer (sp)
      • 1.4% fail on Parking brake performance
        • 1.3% fail on Rbt
          • 1.1% fail on Parking brake performance
          • 0.14% fail on Parking (secondary brake performance)
          • 0.056% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
        • 0.11% fail on Plate brake tester
          • 0.11% fail on Parking (secondary brake performance) (5 times worse than other 2012 vans)
      • 1.2% fail on Service brake performance (34% better than other 2012 vans)
        • 1.2% fail on Rbt (35% better than other 2012 vans)
          • 0.92% fail on Service brake performance (37% better than other 2012 vans)
          • 0.31% fail on Service brake imbalance
        • 0.056% fail on Plate brake tester
          • 0.056% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.53% fail on Service Brake Efficiency (sp)
        • 0.50% fail on Rbt (sp)
          • 0.42% fail on Service brake performance
          • 0.084% fail on Service brake imbalance (77% better than other 2012 vans)
        • 0.028% fail on Plate brake tester (sp)
          • 0.028% fail on Service brake imbalance
      • 0.056% fail on Brake performance not tested
    • 1.7% fail on Mechanical brake components (60% better than other 2012 vans)
      • 1.2% fail on Brake linings and pads (60% better than other 2012 vans)
        • 1.2% fail on Brake pads (60% better than other 2012 vans)
        • 0.028% fail on Brake linings
      • 0.45% fail on Brake discs and drums (68% better than other 2012 vans)
        • 0.45% fail on Brake discs (68% better than other 2012 vans)
      • 0.25% fail on Brake cables, rods, levers and linkages
        • 0.14% fail on Cable
        • 0.084% fail on Linkage (3 times worse than other 2012 vans)
        • 0.028% fail on Pivot
    • 0.50% fail on ABS / EBS / ESC (55% better than other 2012 vans)
      • 0.45% fail on Anti-lock braking system (50% better than other 2012 vans)
      • 0.056% fail on Electronic stability control (88% better than other 2012 vans)
    • 0.33% fail on Service brake pedal or hand lever
      • 0.28% fail on Pedal
      • 0.056% fail on Hand lever
    • 0.31% fail on Parking brake control
      • 0.31% fail on Lever
    • 0.17% fail on Rigid brake pipes (94% better than other 2012 vans)
    • 0.084% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.084% fail on Hydraulic brake callipers
    • 0.056% fail on Flexible brake hoses
    • 0.056% fail on Other components and prescribed areas
      • 0.056% fail on Other components
  • 5.4% fail on Suspension (61% better than other 2012 vans)
    • 2.9% fail on Suspension arms (39% better than other 2012 vans)
      • 1.8% fail on Pins and bushes
      • 0.95% fail on Ball joint (60% better than other 2012 vans)
      • 0.36% fail on Ball joint dust cover
    • 1.3% fail on Springs (66% better than other 2012 vans)
      • 1.1% fail on Coil springs (63% better than other 2012 vans)
        • 1.1% fail on Coil spring (64% better than other 2012 vans)
        • 0.028% fail on Mounting
      • 0.17% fail on Leaf springs (79% better than other 2012 vans)
        • 0.11% fail on Shackle pins and bushes
        • 0.028% fail on Leaf spring
        • 0.028% fail on Anchor pins and bushes
    • 0.78% fail on Shock absorbers
    • 0.42% fail on Other suspension component
      • 0.22% fail on Ball joint
      • 0.22% fail on Ball joint dust cover (2 times worse than other 2012 vans)
    • 0.28% fail on Anti-roll bars (94% better than other 2012 vans)
      • 0.14% fail on Linkage pins and bushes (75% better than other 2012 vans)
      • 0.028% fail on Anti-roll bar
      • 0.028% fail on Pins and bushes
      • 0.028% fail on Linkage
      • 0.028% fail on Ball joint
      • 0.028% fail on Linkage ball joints
      • 0.028% fail on Linkage attachment bracket and mounting
    • 0.14% fail on Wheel bearings (89% better than other 2012 vans)
    • 0.14% fail on Macpherson strut
      • 0.056% fail on Pins and bushes
      • 0.056% fail on Ball joint (5 times worse than other 2012 vans)
      • 0.028% fail on Macpherson strut
    • 0.056% fail on Suspension rods
      • 0.028% fail on Pins and bushes
      • 0.028% fail on Ball joint
    • 0.056% fail on Air/gas/fluid suspension (9 times worse than other 2012 vans)
      • 0.028% fail on Suspension unit
      • 0.028% fail on Bellows
    • 0.056% fail on Component mounting prescribed areas
    • 0.028% fail on Axles
      • 0.028% fail on Swivel pins and bushes
  • 5.0% fail on Visibility (33% better than other 2012 vans)
    • 2.4% fail on Washers (30% better than other 2012 vans)
    • 2.3% fail on Wipers (34% better than other 2012 vans)
    • 0.39% fail on View to rear
      • 0.39% fail on Mirrors
    • 0.28% fail on Condition of glass
      • 0.28% fail on Windscreen
    • 0.028% fail on Driver's view
    • 0.028% fail on Bonnet
  • 3.6% fail on Noise, emissions and leaks (23% better than other 2012 vans)
    • 3.3% fail on Exhaust emissions (26% better than other 2012 vans)
      • 2.8% fail on Compression ignition
        • 1.6% fail on Malfunction indicator lamp
        • 0.95% fail on On or after 01/07/2008
        • 0.22% fail on Emissions not tested
        • 0.028% fail on Emission control equipment
          • 0.028% fail on Other emission control equipment
        • 0.028% fail on Pre 01/07/2008 Turbo
        • 0.028% fail on Pre 01/07/2008 Non turbo
      • 0.59% fail on Spark ignition
        • 0.53% fail on Malfunction indicator lamp
        • 0.028% fail on Non catalyst emissions
        • 0.028% fail on Catalyst emissions
        • 0.028% fail on Emissions not tested
    • 0.42% fail on Fluid leaks
      • 0.33% fail on Engine oil leaks
      • 0.056% fail on Other leaks
      • 0.028% fail on Transmission oil leaks
    • 0.028% fail on Noise suppression
      • 0.028% fail on Sound deadening material
  • 2.1% fail on Tyres (63% better than other 2012 vans)
    • 1.1% fail on Condition (55% better than other 2012 vans)
    • 0.92% fail on Tread depth (73% better than other 2012 vans)
    • 0.084% fail on Size/type
  • 2.1% fail on Seat belts and supplementary restraint systems
    • 1.2% fail on SRS malfunction indicator lamp
    • 0.78% fail on Seat belts
      • 0.59% fail on Condition
      • 0.17% fail on Attachment (3 times worse than other 2012 vans)
      • 0.028% fail on Prescribed areas
      • 0.028% fail on Requirements
    • 0.11% fail on Airbags (5 times worse than other 2012 vans)
      • 0.11% fail on Drivers airbag (5 times worse than other 2012 vans)
  • 2.0% fail on Body, chassis, structure (69% better than other 2012 vans)
    • 0.45% fail on Transmission (89% better than other 2012 vans)
      • 0.45% fail on Drive shafts (88% better than other 2012 vans)
        • 0.42% fail on Joints (89% better than other 2012 vans)
        • 0.028% fail on Bearing housing
    • 0.36% fail on Exhaust system (63% better than other 2012 vans)
    • 0.31% fail on Doors
      • 0.17% fail on Other passenger's door
        • 0.084% fail on Door condition
        • 0.056% fail on Catch (6 times worse than other 2012 vans)
        • 0.056% fail on Hinge (11 times worse than other 2012 vans)
      • 0.084% fail on Driver's door
        • 0.084% fail on Door condition
      • 0.056% fail on Front passenger's door
        • 0.056% fail on Door condition
    • 0.28% fail on Body
      • 0.20% fail on Other body component
      • 0.056% fail on Panel
      • 0.028% fail on Mounting fixings
    • 0.22% fail on Fuel system
      • 0.084% fail on Tank
      • 0.084% fail on Fuel cap/sealing device
      • 0.056% fail on System
    • 0.14% fail on Integral vehicle structure
      • 0.11% fail on Integral vehicle structure condition
      • 0.056% fail on Strengthening plate (35 times worse than other 2012 vans)
    • 0.14% fail on Bumpers
    • 0.056% fail on Spare wheel
      • 0.056% fail on Spare wheel condition
    • 0.056% fail on Seats
      • 0.056% fail on Passenger's seat
    • 0.028% fail on Chassis
      • 0.028% fail on Chassis condition
    • 0.028% fail on Towbar
      • 0.028% fail on Safety device
    • 0.028% fail on Engine mounting
      • 0.028% fail on Engine mounting condition
    • 0.028% fail on Load security
      • 0.028% fail on Loading door
    • 0.028% fail on Undertray
  • 1.2% fail on Steering (69% better than other 2012 vans)
    • 0.84% fail on Steering linkage components (75% better than other 2012 vans)
      • 0.75% fail on Track rod end (76% better than other 2012 vans)
      • 0.11% fail on Ball joint
    • 0.33% fail on Power steering
      • 0.14% fail on Pipes and hoses
      • 0.084% fail on Operation
      • 0.084% fail on Other components
      • 0.056% fail on Rams (7 times worse than other 2012 vans)
    • 0.11% fail on Steering gear
      • 0.11% fail on Steering rack
  • 0.20% fail on Identification of the vehicle (67% better than other 2012 vans)
    • 0.20% fail on Registration plates (67% better than other 2012 vans)
  • 0.11% fail on Road Wheels
    • 0.084% fail on Attachment
    • 0.028% fail on Condition
  • 0.084% fail on Buses and coaches supplementary tests (3 times worse than other 2012 vans)
    • 0.056% fail on Doors
      • 0.028% fail on Emergency exits
      • 0.028% fail on Passenger entrance/exit doors
    • 0.028% fail on Steps and stairs
      • 0.028% fail on Steps
      • 0.028% fail on Retractable steps
  • 0.028% fail on Speedometer and speed limiter
    • 0.028% fail on Speedometer
  • 0.028% fail on Seat belt installation check
    • 0.028% fail on Anchorages