Peugeot Expert MOT Results

Registered in 2000
49.7% pass rate
from 193 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 vans and highlighted areas where the Peugeot Expert is unusually good or bad.

  • 25% fail on Suspension
    • 11% fail on Component mounting prescribed areas
    • 9.3% fail on Suspension arms (93% worse than other 2000 vans)
      • 5.2% fail on Ball joint
      • 2.6% fail on Ball joint dust cover
      • 1.6% fail on Pins and bushes
      • 1.0% fail on Suspension arm
    • 5.2% fail on Sub-frames (3 times worse than other 2000 vans)
      • 4.1% fail on Sub-frame mounting prescribed areas (3 times worse than other 2000 vans)
      • 1.6% fail on Sub-frame (8 times worse than other 2000 vans)
      • 1.0% fail on Pins and bushes (44 times worse than other 2000 vans)
    • 3.1% fail on Other suspension component (2 times worse than other 2000 vans)
      • 1.6% fail on Ball joint
      • 1.0% fail on Pins and bushes (21 times worse than other 2000 vans)
      • 0.52% fail on Attachment bracket and mounting
    • 2.6% fail on Macpherson strut (14 times worse than other 2000 vans)
      • 2.6% fail on Attachment bracket and mounting (28 times worse than other 2000 vans)
    • 1.0% fail on Axles (7 times worse than other 2000 vans)
      • 1.0% fail on Axle (31 times worse than other 2000 vans)
      • 0.52% fail on Swivel pins and bushes
    • 1.0% fail on Suspension rods (15 times worse than other 2000 vans)
      • 0.52% fail on Ball joint
      • 0.52% fail on Ball joint dust cover
    • 0.52% fail on Wheel bearings
    • 0.52% fail on Anti-roll bars
      • 0.52% fail on Attachment bracket and mounting
  • 21% fail on Body, chassis, structure
    • 9.3% fail on Transmission (130% worse than other 2000 vans)
      • 8.8% fail on Drive shafts (180% worse than other 2000 vans)
        • 8.8% fail on Joints (190% worse than other 2000 vans)
      • 0.52% fail on Prop shafts
        • 0.52% fail on Joints
    • 7.8% fail on Exhaust system (96% worse than other 2000 vans)
    • 2.6% fail on Integral vehicle structure
      • 1.6% fail on Integral vehicle structure condition
      • 1.0% fail on Sub-frame (19 times worse than other 2000 vans)
        • 1.0% fail on Sub-frame condition (21 times worse than other 2000 vans)
    • 1.6% fail on Chassis
      • 1.6% fail on Chassis condition
    • 1.6% fail on Fuel system
      • 1.0% fail on Fuel cap/sealing device
      • 0.52% fail on System
    • 0.52% fail on Bumpers
    • 0.52% fail on Towbar
      • 0.52% fail on Other towbar components
    • 0.52% fail on Doors
      • 0.52% fail on Other passenger's door
        • 0.52% fail on Door condition
  • 18% fail on Lamps, reflectors and electrical equipment
    • 5.2% fail on Stop lamp
    • 5.2% fail on Direction indicators
      • 5.2% fail on Flashing type
        • 3.1% fail on Individual direction indicators
        • 1.6% fail on Side repeaters
        • 0.52% fail on Switch
    • 4.1% fail on Headlamps
      • 3.6% fail on Headlamp
      • 0.52% fail on Headlamp levelling device
    • 2.6% fail on Headlamp aim
      • 2.6% fail on Headlamp aim
      • 0.52% fail on Headlamp aim not tested
    • 2.6% fail on Electrical equipment
      • 1.6% fail on Horn
      • 0.52% fail on Electrical wiring
      • 0.52% fail on Battery(ies)
    • 2.1% fail on Registration plate lamp(s)
    • 1.0% fail on Position lamps
      • 1.0% fail on Position lamp
    • 1.0% fail on Front and rear fog lamps
      • 1.0% fail on Rear fog lamp
        • 1.0% fail on Rear fog lamp
  • 13% fail on Brakes
    • 8.8% fail on Brake performance
      • 6.2% fail on Service brake performance
        • 6.2% fail on Rbt
          • 4.7% fail on Service brake performance
          • 2.1% fail on Service brake imbalance
      • 3.6% fail on Service Brake Efficiency (sp)
        • 3.6% fail on Rbt (sp)
          • 2.6% fail on Service brake imbalance
          • 1.0% fail on Service brake performance
      • 0.52% fail on Parking brake efficiency (sp)
        • 0.52% fail on Rbt (sp)
    • 2.1% fail on Rigid brake pipes
    • 1.6% fail on Load sensing valves
    • 1.6% fail on Mechanical brake components
      • 1.0% fail on Brake linings and pads
        • 1.0% fail on Brake pads
      • 0.52% fail on Brake discs and drums
        • 0.52% fail on Brake discs
    • 1.0% fail on Hydraulic systems
      • 0.52% fail on Brake fluid
      • 0.52% fail on Valves
    • 0.52% fail on Service brake pedal or hand lever
      • 0.52% fail on Hand lever
    • 0.52% fail on Flexible brake hoses
    • 0.52% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.52% fail on Hydraulic brake cylinder
  • 11% fail on Steering
    • 6.2% fail on Steering gear (170% worse than other 2000 vans)
      • 6.2% fail on Steering rack (180% worse than other 2000 vans)
    • 5.2% fail on Steering linkage components
      • 4.1% fail on Track rod end
      • 1.0% fail on Ball joint
    • 0.52% fail on Power steering
      • 0.52% fail on Pipes and hoses
  • 11% fail on Visibility
    • 6.2% fail on Wipers
    • 5.7% fail on Washers
    • 0.52% fail on Bonnet
    • 0.52% fail on View to rear
      • 0.52% fail on Mirrors
  • 6.7% fail on Tyres
    • 5.2% fail on Tread depth (130% worse than other 2000 vans)
    • 2.1% fail on Condition
  • 4.7% fail on Seat belts and supplementary restraint systems
    • 3.1% fail on Seat belts
      • 2.1% fail on Condition
      • 1.0% fail on Prescribed areas
    • 1.6% fail on SRS malfunction indicator lamp
  • 3.6% fail on Noise, emissions and leaks
    • 3.1% fail on Exhaust emissions
      • 3.1% fail on Compression ignition
        • 1.6% fail on Emissions not tested
        • 1.0% fail on Pre 01/07/2008 Non turbo
        • 0.52% fail on Pre 01/07/2008 Turbo
    • 0.52% fail on Fluid leaks
      • 0.52% fail on Engine oil leaks
  • 1.0% fail on Identification of the vehicle
    • 1.0% fail on Registration plates