MOT Results

Honest John Vans MOT Results » Toyota » Dyna » 2012

Toyota Dyna MOT Results

Registered in 2012
66.4% pass rate
from 110 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Toyota Dyna is unusually good or bad.

  • 15% fail on Brakes
    • 11% fail on Brake performance
      • 6.4% fail on Service brake performance (2 times worse than other 2012 vans)
        • 6.4% fail on Rbt (2 times worse than other 2012 vans)
          • 3.6% fail on Service brake performance
          • 2.7% fail on Service brake imbalance (5 times worse than other 2012 vans)
      • 4.5% fail on Service Brake Efficiency (sp) (4 times worse than other 2012 vans)
        • 4.5% fail on Rbt (sp) (4 times worse than other 2012 vans)
          • 2.7% fail on Service brake performance (4 times worse than other 2012 vans)
          • 2.7% fail on Service brake imbalance (6 times worse than other 2012 vans)
      • 4.5% fail on Parking brake efficiency (sp)
        • 4.5% fail on Rbt (sp)
    • 2.7% fail on Mechanical brake components
      • 2.7% fail on Brake linings and pads
        • 2.7% fail on Brake pads
    • 1.8% fail on Rigid brake pipes
    • 0.91% fail on Hydraulic systems
      • 0.91% fail on Valves
    • 0.91% fail on Flexible brake hoses
    • 0.91% fail on Load sensing valves
    • 0.91% fail on ABS / EBS / ESC
      • 0.91% fail on Anti-lock braking system
  • 14% fail on Lamps, reflectors and electrical equipment
    • 8.2% fail on Front and rear fog lamps (3 times worse than other 2012 vans)
      • 8.2% fail on Rear fog lamp (3 times worse than other 2012 vans)
        • 8.2% fail on Rear fog lamp (3 times worse than other 2012 vans)
    • 4.5% fail on Stop lamp
    • 4.5% fail on Registration plate lamp(s)
    • 1.8% fail on Direction indicators
      • 1.8% fail on Flashing type
        • 1.8% fail on Individual direction indicators
        • 0.91% fail on Side repeaters
    • 0.91% fail on Headlamps
      • 0.91% fail on Headlamp
    • 0.91% fail on Headlamp aim
      • 0.91% fail on Headlamp aim
    • 0.91% fail on Reversing lamps
      • 0.91% fail on Reversing lamps
  • 14% fail on Suspension
    • 7.3% fail on Springs
      • 7.3% fail on Leaf springs (8 times worse than other 2012 vans)
        • 7.3% fail on Leaf spring (12 times worse than other 2012 vans)
        • 0.91% fail on Anchor pins and bushes
    • 6.4% fail on Anti-roll bars
      • 3.6% fail on Pins and bushes (3 times worse than other 2012 vans)
      • 2.7% fail on Linkage pins and bushes (3 times worse than other 2012 vans)
    • 0.91% fail on Wheel bearings
    • 0.91% fail on Other suspension component
      • 0.91% fail on Ball joint
  • 10% fail on Visibility
    • 6.4% fail on Wipers
    • 3.6% fail on Washers
  • 8.2% fail on Tyres
    • 7.3% fail on Tread depth
    • 1.8% fail on Condition
  • 3.6% fail on Body, chassis, structure
    • 1.8% fail on Body
      • 0.91% fail on Mounting fixings
      • 0.91% fail on Other body component
    • 0.91% fail on Exhaust system
    • 0.91% fail on Fuel system
      • 0.91% fail on Fuel cap/sealing device
  • 2.7% fail on Noise, emissions and leaks
    • 2.7% fail on Exhaust emissions
      • 2.7% fail on Compression ignition
        • 1.8% fail on Malfunction indicator lamp
        • 0.91% fail on On or after 01/07/2008
  • 1.8% fail on Steering
    • 0.91% fail on Steering linkage components
      • 0.91% fail on Track rod end
    • 0.91% fail on Steering column
  • 0.91% fail on Seat belts and supplementary restraint systems
    • 0.91% fail on SRS malfunction indicator lamp