MOT Results

Honest John Vans MOT Results » Toyota » Hi-Ace » 1994

Toyota Hi-Ace MOT Results

Registered in 1994
63.6% pass rate
from 33 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1994 vans and highlighted areas where the Toyota Hi-Ace is unusually good or bad.

  • 24% fail on Lamps, reflectors and electrical equipment
    • 15% fail on Stop lamp (4 times worse than other 1994 vans)
    • 6.1% fail on Direction indicators
      • 6.1% fail on Flashing type
        • 6.1% fail on Individual direction indicators
    • 3.0% fail on Headlamp aim
      • 3.0% fail on Headlamp aim
    • 3.0% fail on Front and rear fog lamps
      • 3.0% fail on Rear fog lamp
        • 3.0% fail on Rear fog lamp
    • 3.0% fail on Registration plate lamp(s)
    • 3.0% fail on Rear reflectors
    • 3.0% fail on Electrical equipment
      • 3.0% fail on Horn
  • 18% fail on Visibility
    • 12% fail on Washers
    • 3.0% fail on View to rear
      • 3.0% fail on Mirrors
    • 3.0% fail on Wipers
  • 18% fail on Suspension
    • 6.1% fail on Springs
      • 6.1% fail on Spring mounting prescribed areas (9 times worse than other 1994 vans)
    • 6.1% fail on Component mounting prescribed areas
    • 3.0% fail on Suspension arms
      • 3.0% fail on Ball joint
    • 3.0% fail on Anti-roll bars
      • 3.0% fail on Linkage
  • 12% fail on Brakes
    • 9.1% fail on Brake performance
      • 9.1% fail on Service brake performance
        • 9.1% fail on Rbt
          • 9.1% fail on Service brake performance
      • 3.0% fail on Service Brake Efficiency (sp)
        • 3.0% fail on Rbt (sp)
          • 3.0% fail on Service brake imbalance
      • 3.0% fail on Parking brake performance
        • 3.0% fail on Rbt
          • 3.0% fail on Parking brake performance
      • 3.0% fail on Parking brake efficiency (sp)
        • 3.0% fail on Rbt (sp)
    • 3.0% fail on Flexible brake hoses
    • 3.0% fail on Load sensing valves
  • 9.1% fail on Body, chassis, structure
    • 6.1% fail on Exhaust system
    • 3.0% fail on Integral vehicle structure
      • 3.0% fail on Integral vehicle structure condition
    • 3.0% fail on Chassis
      • 3.0% fail on Chassis condition
    • 3.0% fail on Fuel system
      • 3.0% fail on Fuel cap/sealing device
  • 6.1% fail on Seat belts and supplementary restraint systems
    • 6.1% fail on Seat belts
      • 3.0% fail on Prescribed areas
      • 3.0% fail on Requirements
  • 6.1% fail on Noise, emissions and leaks
    • 3.0% fail on Exhaust emissions
      • 3.0% fail on Compression ignition
        • 3.0% fail on Pre 01/07/2008 Non turbo
    • 3.0% fail on Fluid leaks
      • 3.0% fail on Engine oil leaks
  • 3.0% fail on Tyres
    • 3.0% fail on Tread depth