Toyota Hi-Lux MOT Results

Registered in 1993
61.6% pass rate
from 151 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 vans and highlighted areas where the Toyota Hi-Lux is unusually good or bad.

  • 16% fail on Body, chassis, structure
    • 6.0% fail on Exhaust system
    • 4.6% fail on Chassis
      • 4.6% fail on Chassis condition
    • 3.3% fail on Integral vehicle structure
      • 3.3% fail on Integral vehicle structure condition
    • 1.3% fail on Transmission
      • 1.3% fail on Prop shafts
        • 0.66% fail on Prop shaft
        • 0.66% fail on Joints
    • 1.3% fail on Body
      • 0.66% fail on Panel
      • 0.66% fail on Other body component
    • 0.66% fail on Seats
      • 0.66% fail on Passenger's seat
    • 0.66% fail on Cabs
      • 0.66% fail on Prescribed areas
  • 13% fail on Lamps, reflectors and electrical equipment
    • 6.6% fail on Front and rear fog lamps
      • 6.6% fail on Rear fog lamp
        • 6.6% fail on Rear fog lamp
    • 3.3% fail on Stop lamp
    • 3.3% fail on Direction indicators
      • 3.3% fail on Flashing type
        • 2.0% fail on Individual direction indicators
        • 1.3% fail on All direction indicators
    • 1.3% fail on Headlamps
      • 1.3% fail on Headlamp
    • 0.66% fail on Headlamp aim
      • 0.66% fail on Headlamp aim
    • 0.66% fail on Position lamps
      • 0.66% fail on Position lamp
    • 0.66% fail on Registration plate lamp(s)
    • 0.66% fail on Rear reflectors
    • 0.66% fail on Electrical equipment
      • 0.66% fail on Battery(ies)
  • 12% fail on Brakes
    • 4.6% fail on Rigid brake pipes
    • 4.6% fail on Brake performance (60% better than other 1993 vans)
      • 4.6% fail on Service Brake Efficiency (sp)
        • 4.6% fail on Rbt (sp)
          • 4.6% fail on Service brake imbalance
          • 0.66% fail on Service brake performance
      • 1.3% fail on Service brake performance (79% better than other 1993 vans)
        • 0.66% fail on Rbt
          • 0.66% fail on Service brake imbalance
        • 0.66% fail on Plate brake tester
          • 0.66% fail on Service brake performance
      • 1.3% fail on Parking brake efficiency (sp)
        • 1.3% fail on Rbt (sp)
    • 1.3% fail on Mechanical brake components
      • 0.66% fail on Brake linings and pads
        • 0.66% fail on Brake pads
      • 0.66% fail on Brake cables, rods, levers and linkages
        • 0.66% fail on Linkage
    • 0.66% fail on Service brake pedal or hand lever
      • 0.66% fail on Pedal
      • 0.66% fail on Hand lever
    • 0.66% fail on Flexible brake hoses
    • 0.66% fail on Load sensing valves
    • 0.66% fail on Other components and prescribed areas
      • 0.66% fail on Prescribed areas
        • 0.66% fail on Master cylinder/servo mounting
    • 0.66% fail on ABS / EBS / ESC
      • 0.66% fail on Electronic braking system
  • 11% fail on Suspension
    • 4.6% fail on Component mounting prescribed areas
    • 4.0% fail on Springs
      • 2.6% fail on Leaf springs (5 times worse than other 1993 vans)
        • 2.0% fail on Shackle pins and bushes (7 times worse than other 1993 vans)
        • 0.66% fail on Shackle bracket
      • 1.3% fail on Spring mounting prescribed areas
    • 2.0% fail on Wheel bearings
    • 1.3% fail on Suspension arms
      • 0.66% fail on Suspension arm
      • 0.66% fail on Ball joint
    • 0.66% fail on Axles
      • 0.66% fail on Swivel pins and bushes
  • 6.6% fail on Steering
    • 5.3% fail on Steering linkage components
      • 2.0% fail on Drag link end (9 times worse than other 1993 vans)
      • 2.0% fail on Track rod end
      • 1.3% fail on Ball joint (10 times worse than other 1993 vans)
    • 0.66% fail on Power steering
      • 0.66% fail on Operation
    • 0.66% fail on Steering play
      • 0.66% fail on Steering box
  • 6.0% fail on Visibility
    • 3.3% fail on Wipers
    • 2.6% fail on Washers
    • 0.66% fail on View to rear
      • 0.66% fail on Mirrors
  • 5.3% fail on Seat belts and supplementary restraint systems
    • 5.3% fail on Seat belts
      • 4.0% fail on Prescribed areas
      • 1.3% fail on Attachment
      • 0.66% fail on Condition
  • 3.3% fail on Noise, emissions and leaks
    • 2.0% fail on Exhaust emissions
      • 2.0% fail on Compression ignition
        • 0.66% fail on Pre 01/07/2008 Turbo
        • 0.66% fail on Pre 01/07/2008 Non turbo
        • 0.66% fail on Emissions not tested
    • 2.0% fail on Fluid leaks
      • 1.3% fail on Other leaks
      • 0.66% fail on Engine oil leaks
  • 2.6% fail on Tyres
    • 1.3% fail on Condition
    • 1.3% fail on Tread depth
  • 1.3% fail on Identification of the vehicle
    • 1.3% fail on Registration plates
  • 0.66% fail on Speedometer and speed limiter
    • 0.66% fail on Speedometer
  • 0.66% fail on Road Wheels
    • 0.66% fail on Hubs