MOT Results

Honest John Vans MOT Results » Vauxhall » Combo » 1999

Vauxhall Combo MOT Results

Registered in 1999
62.2% pass rate
from 111 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1999 vans and highlighted areas where the Vauxhall Combo is unusually good or bad.

  • 14% fail on Suspension
    • 6.3% fail on Component mounting prescribed areas
    • 2.7% fail on Wheel bearings
    • 2.7% fail on Springs
      • 1.8% fail on Spring mounting prescribed areas
      • 0.90% fail on Coil springs
        • 0.90% fail on Coil spring
    • 1.8% fail on Shock absorbers
    • 1.8% fail on Suspension arms
      • 0.90% fail on Attachment bracket and mounting
      • 0.90% fail on Ball joint
    • 0.90% fail on Anti-roll bars
      • 0.90% fail on Linkage attachment bracket and mounting
  • 13% fail on Visibility
    • 7.2% fail on Wipers
    • 5.4% fail on Washers
    • 0.90% fail on View to rear
      • 0.90% fail on Mirrors
  • 12% fail on Lamps, reflectors and electrical equipment
    • 5.4% fail on Registration plate lamp(s)
    • 4.5% fail on Headlamp aim
      • 4.5% fail on Headlamp aim
    • 2.7% fail on Headlamps
      • 1.8% fail on Headlamp
      • 0.90% fail on Dipswitch
      • 0.90% fail on Headlamp levelling device
    • 0.90% fail on Stop lamp
    • 0.90% fail on Electrical equipment
      • 0.90% fail on Horn
  • 12% fail on Body, chassis, structure
    • 5.4% fail on Exhaust system
    • 1.8% fail on Integral vehicle structure
      • 1.8% fail on Integral vehicle structure condition
    • 1.8% fail on Fuel system
      • 0.90% fail on Tank
      • 0.90% fail on Fuel cap/sealing device
    • 0.90% fail on Chassis
      • 0.90% fail on Chassis condition
    • 0.90% fail on Transmission
      • 0.90% fail on Drive shafts
        • 0.90% fail on Joints
    • 0.90% fail on Floor
  • 9.0% fail on Brakes
    • 6.3% fail on Brake performance
      • 2.7% fail on Service brake performance
        • 2.7% fail on Rbt
          • 1.8% fail on Service brake performance
          • 0.90% fail on Service brake imbalance
      • 2.7% fail on Service Brake Efficiency (sp)
        • 2.7% fail on Rbt (sp)
          • 1.8% fail on Service brake imbalance
          • 0.90% fail on Service brake performance
      • 1.8% fail on Parking brake efficiency (sp)
        • 1.8% fail on Rbt (sp)
    • 2.7% fail on Rigid brake pipes
    • 0.90% fail on Other components and prescribed areas
      • 0.90% fail on Prescribed areas
        • 0.90% fail on Master cylinder/servo mounting
  • 7.2% fail on Tyres
    • 4.5% fail on Condition
    • 2.7% fail on Tread depth
  • 5.4% fail on Steering
    • 3.6% fail on Steering linkage components
      • 2.7% fail on Track rod end
      • 0.90% fail on Drag link end
    • 0.90% fail on Steering gear
      • 0.90% fail on Steering rack
    • 0.90% fail on Power steering
      • 0.90% fail on Pipes and hoses
  • 4.5% fail on Seat belts and supplementary restraint systems
    • 3.6% fail on Seat belts
      • 3.6% fail on Prescribed areas
    • 0.90% fail on SRS malfunction indicator lamp
  • 4.5% fail on Noise, emissions and leaks
    • 3.6% fail on Exhaust emissions
      • 1.8% fail on Spark ignition
        • 0.90% fail on Catalyst emissions
        • 0.90% fail on Emissions not tested
      • 1.8% fail on Compression ignition
        • 0.90% fail on Pre 01/07/2008 Turbo
        • 0.90% fail on Pre 01/07/2008 Non turbo
        • 0.90% fail on Emissions not tested
    • 0.90% fail on Fluid leaks
      • 0.90% fail on Engine oil leaks
  • 0.90% fail on Identification of the vehicle
    • 0.90% fail on Registration plates
  • 0.90% fail on Road Wheels
    • 0.90% fail on Condition