Volkswagen Caddy MOT Results

Registered in 1989
67.3% pass rate
from 52 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1989 vans and highlighted areas where the Volkswagen Caddy is unusually good or bad.

  • 21% fail on Lamps, reflectors and electrical equipment
    • 12% fail on Direction indicators
      • 12% fail on Flashing type
        • 7.7% fail on Individual direction indicators
        • 5.8% fail on Side repeaters (4 times worse than other 1989 vans)
    • 12% fail on Front and rear fog lamps (2 times worse than other 1989 vans)
      • 12% fail on Rear fog lamp (2 times worse than other 1989 vans)
        • 12% fail on Rear fog lamp (2 times worse than other 1989 vans)
    • 5.8% fail on Headlamps
      • 5.8% fail on Headlamp
    • 5.8% fail on Stop lamp
    • 3.8% fail on Headlamp aim
      • 1.9% fail on Headlamp aim
      • 1.9% fail on Headlamp aim not tested
    • 1.9% fail on Rear reflectors
    • 1.9% fail on Electrical equipment
      • 1.9% fail on Battery(ies)
      • 1.9% fail on Horn
  • 17% fail on Body, chassis, structure
    • 7.7% fail on Transmission
      • 7.7% fail on Drive shafts
        • 7.7% fail on Joints (2 times worse than other 1989 vans)
    • 5.8% fail on Exhaust system
    • 3.8% fail on Fuel system
      • 1.9% fail on Pipe
      • 1.9% fail on Fuel cap/sealing device
    • 3.8% fail on Doors
      • 3.8% fail on Driver's door (11 times worse than other 1989 vans)
        • 3.8% fail on Door condition (12 times worse than other 1989 vans)
    • 1.9% fail on Towbar
      • 1.9% fail on Other towbar components
  • 15% fail on Suspension
    • 13% fail on Component mounting prescribed areas
    • 1.9% fail on Springs
      • 1.9% fail on Coil springs
        • 1.9% fail on Coil spring
    • 1.9% fail on Shock absorbers
  • 13% fail on Brakes
    • 5.8% fail on Brake performance
      • 3.8% fail on Parking brake efficiency (sp)
        • 3.8% fail on Rbt (sp)
      • 1.9% fail on Service brake performance
        • 1.9% fail on Rbt
          • 1.9% fail on Service brake imbalance
      • 1.9% fail on Service Brake Efficiency (sp)
        • 1.9% fail on Rbt (sp)
          • 1.9% fail on Service brake performance
      • 1.9% fail on Parking brake performance
        • 1.9% fail on Rbt
          • 1.9% fail on Parking brake performance
    • 1.9% fail on Hydraulic systems
      • 1.9% fail on Valves
    • 1.9% fail on Rigid brake pipes
    • 1.9% fail on Flexible brake hoses
    • 1.9% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.9% fail on Hydraulic brake callipers
    • 1.9% fail on Load sensing valves
  • 9.6% fail on Seat belts and supplementary restraint systems
    • 9.6% fail on Seat belts
      • 5.8% fail on Prescribed areas
      • 1.9% fail on Attachment
      • 1.9% fail on Requirements
  • 9.6% fail on Noise, emissions and leaks
    • 9.6% fail on Exhaust emissions
      • 7.7% fail on Spark ignition
        • 7.7% fail on Non catalyst emissions
      • 1.9% fail on Compression ignition
        • 1.9% fail on Pre 01/07/2008 Non turbo
  • 5.8% fail on Steering
    • 3.8% fail on Steering linkage components
      • 3.8% fail on Track rod end
    • 1.9% fail on Steering gear
      • 1.9% fail on Steering rack
  • 5.8% fail on Visibility
    • 3.8% fail on Washers
    • 1.9% fail on Wipers
  • 5.8% fail on Tyres
    • 5.8% fail on Condition