LDV Cub MOT Results

Registered in 2002
34.0% pass rate
from 94 tests in 2017
(27% worse than other 2002 vans)
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2002 vans and highlighted areas where the LDV Cub is unusually good or bad.

  • 39% fail on Suspension (57% worse than other 2002 vans)
    • 35% fail on Prescribed areas (3 times worse than other 2002 vans)
      • 27% fail on Component mounting (4 times worse than other 2002 vans)
      • 13% fail on Spring mounting (2 times worse than other 2002 vans)
      • 3.2% fail on Subframe mounting
    • 6.4% fail on Leaf springs (4 times worse than other 2002 vans)
      • 6.4% fail on Pins and bushes (13 times worse than other 2002 vans)
        • 5.3% fail on Shackle (14 times worse than other 2002 vans)
        • 1.1% fail on Anchor
    • 6.4% fail on Suspension arms
      • 6.4% fail on Pins/bushes/ball joints
    • 3.2% fail on Front suspension joints
    • 2.1% fail on Anti-roll bars
      • 2.1% fail on Linkage pins/bushes/ball joints
    • 1.1% fail on Bonded suspension
      • 1.1% fail on Condition
  • 33% fail on Brakes
    • 23% fail on Brake performance (79% worse than other 2002 vans)
      • 13% fail on Front wheels (190% worse than other 2002 vans)
      • 13% fail on Rear wheels (120% worse than other 2002 vans)
      • 11% fail on Parking brake performance
      • 4.3% fail on Service brake performance
      • 1.1% fail on Brake imbalance
      • 1.1% fail on Brake performance not tested
    • 14% fail on Hydraulic systems
      • 13% fail on Components
        • 11% fail on Pipes
        • 2.1% fail on Hoses
        • 2.1% fail on Valves
      • 1.1% fail on Leaks
    • 3.2% fail on Parking brake
      • 3.2% fail on Condition
    • 3.2% fail on Hub components
      • 2.1% fail on Brake pads
      • 1.1% fail on Brake discs
    • 1.1% fail on Restricted movement
    • 1.1% fail on Prescribed areas
      • 1.1% fail on Master cylinder/servo mounting
  • 27% fail on Lamps, Reflectors and Electrical Equipment
    • 12% fail on Stop lamp
    • 7.4% fail on Position lamps
      • 5.3% fail on Front lamps
      • 2.1% fail on Rear lamps
    • 5.3% fail on Headlamps
      • 5.3% fail on Headlamp
    • 3.2% fail on Registration plate lamp
    • 3.2% fail on Headlamp aim
    • 2.1% fail on Rear fog lamp
      • 2.1% fail on Fog lamp
    • 2.1% fail on Direction indicators
      • 2.1% fail on Flashing type
        • 2.1% fail on Side repeaters
    • 1.1% fail on Battery
  • 9.6% fail on Body, Structure and General Items
    • 5.3% fail on Body condition
    • 4.3% fail on Vehicle structure
      • 4.3% fail on Chassis
  • 8.5% fail on Exhaust, Fuel and Emissions
    • 3.2% fail on Emissions
    • 3.2% fail on Fuel system
      • 2.1% fail on Cap
      • 2.1% fail on System
    • 2.1% fail on Exhaust system
  • 7.4% fail on Driver's view of the road
    • 6.4% fail on Wipers
    • 2.1% fail on Washers
  • 6.4% fail on Tyres
    • 4.3% fail on Tread depth
    • 2.1% fail on Condition
    • 1.1% fail on Size/type
  • 3.2% fail on Steering
    • 2.1% fail on Steering system
      • 1.1% fail on Steering rack
      • 1.1% fail on Other components
        • 1.1% fail on Steering pivot point
    • 1.1% fail on Steering control
      • 1.1% fail on Steering lock
    • 1.1% fail on Power steering
      • 1.1% fail on Other components
  • 1.1% fail on Seat Belts and Supplementary Restraint Systems
    • 1.1% fail on Seat belts
      • 1.1% fail on Prescribed areas