Volkswagen LT35 MOT Results
Registered in 199550.0% pass rate
from 56 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1995 vans and highlighted areas where the Volkswagen LT35 is unusually good or bad.
-
38% fail on
Brakes
(110% worse than other 1995 vans)
-
30% fail on
Brake performance
(160% worse than other 1995 vans)
- 18% fail on Parking brake performance (4 times worse than other 1995 vans)
- 16% fail on Service brake performance (4 times worse than other 1995 vans)
- 11% fail on Front wheels
- 8.9% fail on Rear wheels
- 5.4% fail on Brake imbalance (4 times worse than other 1995 vans)
-
13% fail on
Hydraulic systems
-
13% fail on
Components
- 8.9% fail on Valves (4 times worse than other 1995 vans)
- 3.6% fail on Pipes
- 1.8% fail on Hoses
-
13% fail on
Components
-
3.6% fail on
Parking brake
- 3.6% fail on Condition
-
3.6% fail on
Hub components
- 3.6% fail on Brake calipers (30 times worse than other 1995 vans)
- 1.8% fail on Brake pads
-
1.8% fail on
Service brake control components
-
1.8% fail on
Pedal
- 1.8% fail on Anti-slip
-
1.8% fail on
Pedal
-
1.8% fail on
Mechanical components
- 1.8% fail on Cable
-
30% fail on
Brake performance
(160% worse than other 1995 vans)
-
27% fail on
Lamps, Reflectors and Electrical Equipment
-
7.1% fail on
Headlamps
- 7.1% fail on Headlamp
-
7.1% fail on
Direction indicators
-
7.1% fail on
Flashing type
- 7.1% fail on Side repeaters (4 times worse than other 1995 vans)
-
7.1% fail on
Flashing type
- 5.4% fail on Headlamp aim
- 5.4% fail on Horn
-
3.6% fail on
Position lamps
- 1.8% fail on Front lamps
- 1.8% fail on Rear lamps
- 3.6% fail on Registration plate lamp
-
3.6% fail on
Rear fog lamp
- 1.8% fail on Fog lamp
- 1.8% fail on Tell tale
- 3.6% fail on Stop lamp
- 1.8% fail on Battery
- 1.8% fail on Electrical wiring
-
1.8% fail on
Hazard warning
- 1.8% fail on Switch
-
7.1% fail on
Headlamps
-
14% fail on
Suspension
-
7.1% fail on
Suspension arms
- 7.1% fail on Pins/bushes/ball joints
-
5.4% fail on
Prescribed areas
- 5.4% fail on Component mounting
-
3.6% fail on
Anti-roll bars
- 3.6% fail on Linkage pins/bushes/ball joints
- 3.6% fail on Front suspension joints
-
1.8% fail on
Coil springs
- 1.8% fail on Condition
-
1.8% fail on
Tie bars/rods
- 1.8% fail on Pins/bushes/ball joints
-
1.8% fail on
Axles
- 1.8% fail on King pins
-
7.1% fail on
Suspension arms
-
11% fail on
Driver's view of the road
- 5.4% fail on Wipers
- 5.4% fail on Washers
- 1.8% fail on Mirrors
-
8.9% fail on
Body, Structure and General Items
- 5.4% fail on Body condition
-
1.8% fail on
Doors
- 1.8% fail on Drivers
-
1.8% fail on
Seats
- 1.8% fail on Drivers
-
7.1% fail on
Steering
-
7.1% fail on
Steering system
- 3.6% fail on Track rod end
- 1.8% fail on Ball joint
- 1.8% fail on Drag link end
-
1.8% fail on
Other components
- 1.8% fail on Steering pivot point
-
7.1% fail on
Steering system
-
7.1% fail on
Exhaust, Fuel and Emissions
-
3.6% fail on
Fuel system
- 3.6% fail on System
- 1.8% fail on Exhaust system
- 1.8% fail on Emissions
-
3.6% fail on
Fuel system
-
5.4% fail on
Tyres
- 5.4% fail on Tread depth
-
3.6% fail on
Seat Belts and Supplementary Restraint Systems
-
3.6% fail on
Seat belts
- 3.6% fail on Prescribed areas
-
3.6% fail on
Seat belts
-
1.8% fail on
Registration plates and VIN
- 1.8% fail on Registration plate