FIAT Ducato MOT Results

Registered in 1991
51.7% pass rate
from 509 tests in 2020
(14% worse than other 1991 vans)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1991 vans and highlighted areas where the FIAT Ducato is unusually good or bad.

  • 33% fail on Lamps, reflectors and electrical equipment (45% worse than other 1991 vans)
    • 13% fail on Headlamps (160% worse than other 1991 vans)
      • 13% fail on Headlamp (160% worse than other 1991 vans)
      • 0.20% fail on Dipswitch
      • 0.20% fail on Headlamp levelling device
    • 9.8% fail on Direction indicators (99% worse than other 1991 vans)
      • 9.8% fail on Flashing type (99% worse than other 1991 vans)
        • 5.1% fail on Individual direction indicators (98% worse than other 1991 vans)
        • 4.3% fail on Side repeaters (130% worse than other 1991 vans)
        • 1.2% fail on All direction indicators
    • 6.7% fail on Electrical equipment
      • 3.3% fail on Horn
      • 2.8% fail on Battery(ies)
      • 0.98% fail on Electrical wiring
      • 0.39% fail on Trailer electrical socket
    • 6.3% fail on Headlamp aim
      • 5.7% fail on Headlamp aim
      • 0.59% fail on Headlamp aim not tested
    • 5.1% fail on Front and rear fog lamps
      • 5.1% fail on Rear fog lamp
        • 4.9% fail on Rear fog lamp
        • 0.59% fail on Switch
    • 4.3% fail on Position lamps
      • 3.9% fail on Position lamp
      • 0.39% fail on All position lamps
    • 3.1% fail on Stop lamp
    • 2.9% fail on Registration plate lamp(s)
    • 1.2% fail on Mandatory tell-tales
      • 0.79% fail on Main beam tell-tale
      • 0.79% fail on Rear fog lamp tell-tale
    • 0.59% fail on Outline marker lamps (3 times worse than other 1991 vans)
      • 0.59% fail on Outline marker lamp (3 times worse than other 1991 vans)
    • 0.39% fail on Hazard warning
      • 0.39% fail on Switch
    • 0.20% fail on Rear reflectors
  • 21% fail on Body, chassis, structure (37% worse than other 1991 vans)
    • 8.1% fail on Exhaust system (60% worse than other 1991 vans)
    • 7.9% fail on Transmission (95% worse than other 1991 vans)
      • 7.7% fail on Drive shafts (130% worse than other 1991 vans)
        • 7.7% fail on Joints (130% worse than other 1991 vans)
        • 0.20% fail on Drive shaft
      • 0.20% fail on Prop shafts
        • 0.20% fail on Joints
    • 2.6% fail on Chassis
      • 2.6% fail on Chassis condition
    • 2.0% fail on Integral vehicle structure
      • 2.0% fail on Integral vehicle structure condition
    • 1.8% fail on Fuel system
      • 0.98% fail on Fuel cap/sealing device
      • 0.39% fail on System
      • 0.20% fail on Hose
      • 0.20% fail on Pipe
    • 1.4% fail on Seats
      • 1.2% fail on Driver's seat
      • 0.39% fail on Passenger's seat
    • 1.2% fail on Bumpers
    • 0.98% fail on Body
      • 0.59% fail on Panel
      • 0.20% fail on Body condition
      • 0.20% fail on Other body component
    • 0.79% fail on Engine mounting (3 times worse than other 1991 vans)
      • 0.39% fail on Engine mounting condition
      • 0.39% fail on Bracket (5 times worse than other 1991 vans)
    • 0.59% fail on Doors
      • 0.39% fail on Driver's door
        • 0.39% fail on Door condition
      • 0.20% fail on Front passenger's door
        • 0.20% fail on Door condition
    • 0.39% fail on Towbar
      • 0.20% fail on Other towbar components
      • 0.20% fail on Vehicle structure
    • 0.39% fail on Floor
    • 0.20% fail on Load security
      • 0.20% fail on Loading door
  • 17% fail on Brakes
    • 11% fail on Brake performance
      • 7.1% fail on Service brake performance
        • 7.1% fail on Rbt
          • 6.5% fail on Service brake performance
          • 0.79% fail on Service brake imbalance
      • 4.7% fail on Service Brake Efficiency (sp)
        • 4.7% fail on Rbt (sp)
          • 3.3% fail on Service brake performance
          • 2.6% fail on Service brake imbalance
      • 2.4% fail on Parking brake efficiency (sp)
        • 2.4% fail on Rbt (sp)
      • 0.98% fail on Brake performance not tested
      • 0.79% fail on Parking brake performance
        • 0.59% fail on Rbt
          • 0.59% fail on Parking brake performance
        • 0.20% fail on Plate brake tester
          • 0.20% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
    • 5.3% fail on Rigid brake pipes (81% worse than other 1991 vans)
    • 1.8% fail on Mechanical brake components
      • 0.98% fail on Brake discs and drums
        • 0.98% fail on Brake discs
      • 0.59% fail on Brake cables, rods, levers and linkages
        • 0.59% fail on Cable
      • 0.20% fail on Brake linings and pads
        • 0.20% fail on Brake pads
    • 1.4% fail on Load sensing valves
    • 0.98% fail on Flexible brake hoses
    • 0.59% fail on Service brake pedal or hand lever
      • 0.39% fail on Hand lever
      • 0.20% fail on Pedal
    • 0.59% fail on Parking brake control
      • 0.59% fail on Lever
    • 0.39% fail on Hydraulic systems
      • 0.20% fail on Reservoirs
      • 0.20% fail on Valves
    • 0.39% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.39% fail on Hydraulic brake cylinder
    • 0.39% fail on Other components and prescribed areas
      • 0.39% fail on Prescribed areas
        • 0.39% fail on Park brake mechanism/associated mountings
    • 0.20% fail on Air and vacuum systems
      • 0.20% fail on Pressure/vacuum build up
  • 12% fail on Suspension
    • 6.5% fail on Component mounting prescribed areas
    • 3.5% fail on Wheel bearings
    • 1.6% fail on Suspension arms
      • 0.79% fail on Ball joint dust cover
      • 0.39% fail on Suspension arm
      • 0.39% fail on Ball joint
      • 0.20% fail on Attachment bracket and mounting
    • 1.4% fail on Springs
      • 0.79% fail on Spring mounting prescribed areas
      • 0.59% fail on Leaf springs
        • 0.39% fail on Leaf spring
        • 0.20% fail on Shackle pins and bushes
      • 0.20% fail on Coil springs
        • 0.20% fail on Mounting
    • 0.79% fail on Shock absorbers
    • 0.79% fail on Other suspension component
      • 0.59% fail on Ball joint dust cover
      • 0.20% fail on Attachment bracket and mounting
    • 0.20% fail on Anti-roll bars
      • 0.20% fail on Pins and bushes
  • 11% fail on Visibility
    • 7.5% fail on Wipers
    • 4.9% fail on Washers
    • 0.20% fail on Bonnet
    • 0.20% fail on View to rear
      • 0.20% fail on Mirrors
  • 5.7% fail on Noise, emissions and leaks
    • 3.9% fail on Exhaust emissions
      • 2.0% fail on Spark ignition
        • 0.98% fail on Non catalyst emissions
        • 0.59% fail on Catalyst emissions
        • 0.59% fail on Emissions not tested
      • 2.0% fail on Compression ignition
        • 0.79% fail on Pre 01/07/2008 Turbo
        • 0.79% fail on Emissions not tested
        • 0.39% fail on Pre 01/07/2008 Non turbo
    • 2.4% fail on Fluid leaks
      • 1.4% fail on Engine oil leaks
      • 0.98% fail on Other leaks
  • 4.5% fail on Steering
    • 3.7% fail on Steering linkage components
      • 3.5% fail on Track rod end
      • 0.20% fail on Ball joint
    • 0.39% fail on Steering gear (82% better than other 1991 vans)
      • 0.39% fail on Steering rack (82% better than other 1991 vans)
    • 0.39% fail on Power steering
      • 0.39% fail on Operation
      • 0.20% fail on Other components
    • 0.20% fail on Steering wheel
    • 0.20% fail on Steering column
  • 2.6% fail on Seat belts and supplementary restraint systems
    • 2.6% fail on Seat belts
      • 2.0% fail on Prescribed areas
      • 0.79% fail on Condition
  • 2.4% fail on Tyres
    • 1.2% fail on Tread depth
    • 0.98% fail on Condition
    • 0.20% fail on Size/type
  • 0.20% fail on Speedometer and speed limiter
    • 0.20% fail on Speedometer
  • 0.20% fail on Road Wheels
    • 0.20% fail on Attachment