FIAT Scudo MOT Results
Registered in 201361.4% pass rate
from 472 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 vans and highlighted areas where the FIAT Scudo is unusually good or bad.
-
17% fail on
Lamps, reflectors and electrical equipment
- 5.7% fail on Registration plate lamp(s)
-
3.8% fail on
Headlamp aim
- 3.8% fail on Headlamp aim
-
3.6% fail on
Direction indicators
-
3.6% fail on
Flashing type
- 3.4% fail on Individual direction indicators (120% worse than other 2013 vans)
- 0.21% fail on Side repeaters
-
3.6% fail on
Flashing type
- 3.4% fail on Stop lamp
-
2.3% fail on
Headlamps
- 2.3% fail on Headlamp
-
1.1% fail on
Front and rear fog lamps
-
1.1% fail on
Rear fog lamp
- 1.1% fail on Rear fog lamp
-
1.1% fail on
Rear fog lamp
-
0.21% fail on
Position lamps
- 0.21% fail on Position lamp
-
0.21% fail on
Hazard warning
- 0.21% fail on Switch
-
11% fail on
Body, chassis, structure
(100% worse than other 2013 vans)
-
8.1% fail on
Transmission
(150% worse than other 2013 vans)
-
7.4% fail on
Drive shafts
(140% worse than other 2013 vans)
- 7.4% fail on Joints (150% worse than other 2013 vans)
-
0.64% fail on
Prop shafts
- 0.64% fail on Joints
-
7.4% fail on
Drive shafts
(140% worse than other 2013 vans)
- 3.4% fail on Exhaust system (3 times worse than other 2013 vans)
- 0.42% fail on Bumpers
-
0.21% fail on
Fuel system
- 0.21% fail on Pipe
-
0.21% fail on
Spare wheel
- 0.21% fail on Carrier
-
0.21% fail on
Engine mounting
- 0.21% fail on Engine mounting condition
-
0.21% fail on
Doors
-
0.21% fail on
Other passenger's door
- 0.21% fail on Catch
-
0.21% fail on
Other passenger's door
-
8.1% fail on
Transmission
(150% worse than other 2013 vans)
-
9.5% fail on
Suspension
-
7.2% fail on
Suspension arms
(98% worse than other 2013 vans)
- 5.3% fail on Ball joint (2 times worse than other 2013 vans)
- 1.7% fail on Ball joint dust cover (5 times worse than other 2013 vans)
- 0.21% fail on Pins and bushes
-
1.5% fail on
Anti-roll bars
- 0.85% fail on Linkage ball joints
- 0.21% fail on Linkage
- 0.21% fail on Ball joint dust cover
- 0.21% fail on Linkage ball joint dust cover
- 0.64% fail on Wheel bearings
-
0.21% fail on
Springs
-
0.21% fail on
Coil springs
- 0.21% fail on Coil spring
-
0.21% fail on
Coil springs
- 0.21% fail on Shock absorbers
-
0.21% fail on
Other suspension component
- 0.21% fail on Ball joint
-
7.2% fail on
Suspension arms
(98% worse than other 2013 vans)
-
7.6% fail on
Visibility
- 4.2% fail on Wipers
- 3.4% fail on Washers
-
5.5% fail on
Brakes
(50% better than other 2013 vans)
-
3.2% fail on
Brake performance
-
1.7% fail on
Service brake performance
-
1.7% fail on
Rbt
- 1.7% fail on Service brake performance
-
1.7% fail on
Rbt
-
1.5% fail on
Parking brake efficiency (sp)
- 1.5% fail on Rbt (sp)
-
0.42% fail on
Service Brake Efficiency (sp)
-
0.42% fail on
Rbt (sp)
- 0.42% fail on Service brake performance
-
0.42% fail on
Rbt (sp)
-
0.42% fail on
Parking brake performance
-
0.42% fail on
Rbt
- 0.42% fail on Parking brake performance
-
0.42% fail on
Rbt
-
1.7% fail on
Service brake performance
-
2.3% fail on
Mechanical brake components
-
1.9% fail on
Brake linings and pads
- 1.9% fail on Brake pads
-
0.42% fail on
Brake cables, rods, levers and linkages
- 0.21% fail on Cable
- 0.21% fail on Pivot
-
0.21% fail on
Brake discs and drums
- 0.21% fail on Brake discs
-
1.9% fail on
Brake linings and pads
-
0.85% fail on
Service brake pedal or hand lever
- 0.85% fail on Pedal
-
0.42% fail on
Parking brake control
- 0.42% fail on Lever
- 0.21% fail on Flexible brake hoses
-
0.21% fail on
ABS / EBS / ESC
- 0.21% fail on Anti-lock braking system
-
3.2% fail on
Brake performance
-
3.8% fail on
Tyres
- 3.0% fail on Tread depth
- 0.42% fail on Size/type
- 0.42% fail on Condition (82% better than other 2013 vans)
-
3.0% fail on
Noise, emissions and leaks
-
3.0% fail on
Exhaust emissions
-
2.3% fail on
Compression ignition
- 1.3% fail on On or after 01/07/2008
- 1.1% fail on Malfunction indicator lamp
- 0.21% fail on Emissions not tested
-
0.64% fail on
Spark ignition
- 0.64% fail on Malfunction indicator lamp
-
2.3% fail on
Compression ignition
-
3.0% fail on
Exhaust emissions
-
1.9% fail on
Seat belts and supplementary restraint systems
-
1.1% fail on
Seat belts
- 1.1% fail on Condition
- 0.85% fail on SRS malfunction indicator lamp
-
1.1% fail on
Seat belts
-
0.85% fail on
Steering
(73% better than other 2013 vans)
-
0.64% fail on
Steering linkage components
(76% better than other 2013 vans)
- 0.64% fail on Track rod end (74% better than other 2013 vans)
-
0.21% fail on
Steering gear
- 0.21% fail on Steering rack
-
0.21% fail on
Power steering
- 0.21% fail on Operation
-
0.64% fail on
Steering linkage components
(76% better than other 2013 vans)
-
0.64% fail on
Road Wheels
- 0.42% fail on Attachment
- 0.21% fail on Condition
-
0.42% fail on
Identification of the vehicle
- 0.42% fail on Registration plates