Ford P100 MOT Results

Registered in 1993
55.7% pass rate
from 61 tests in 2017
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 vans and highlighted areas where the Ford P100 is unusually good or bad.

  • 36% fail on Lamps, Reflectors and Electrical Equipment
    • 15% fail on Position lamps (140% worse than other 1993 vans)
      • 13% fail on Rear lamps (3 times worse than other 1993 vans)
      • 4.9% fail on Front lamps
    • 15% fail on Rear fog lamp
      • 15% fail on Fog lamp
      • 1.6% fail on Tell tale
      • 1.6% fail on Switch
    • 9.8% fail on Stop lamp
    • 9.8% fail on Headlamp aim
    • 6.6% fail on Registration plate lamp
    • 6.6% fail on Direction indicators
      • 6.6% fail on Flashing type
        • 6.6% fail on Individual lamps
        • 1.6% fail on Side repeaters
    • 4.9% fail on Battery
    • 4.9% fail on Headlamps
      • 4.9% fail on Headlamp
    • 3.3% fail on Horn
    • 1.6% fail on Hazard warning
      • 1.6% fail on Lamp
  • 16% fail on Body, Structure and General Items
    • 8.2% fail on Body condition
    • 4.9% fail on Vehicle structure
      • 4.9% fail on Chassis
    • 3.3% fail on Seats
      • 3.3% fail on Drivers
    • 1.6% fail on Engine mountings
    • 1.6% fail on Body security
  • 15% fail on Brakes
    • 8.2% fail on Hydraulic systems
      • 6.6% fail on Components
        • 4.9% fail on Pipes
        • 1.6% fail on Hoses
        • 1.6% fail on Valves
      • 3.3% fail on Leaks
    • 6.6% fail on Brake performance
      • 3.3% fail on Front wheels
      • 3.3% fail on Rear wheels
      • 1.6% fail on Brake imbalance
      • 1.6% fail on Parking brake performance
    • 3.3% fail on Hub components
      • 1.6% fail on Brake pads
      • 1.6% fail on Brake discs
  • 13% fail on Exhaust, Fuel and Emissions
    • 6.6% fail on Fuel system
      • 3.3% fail on System
      • 1.6% fail on Hose
      • 1.6% fail on Pipe
    • 3.3% fail on Exhaust system
    • 3.3% fail on Emissions
  • 11% fail on Suspension
    • 3.3% fail on Front suspension joints
    • 3.3% fail on Prescribed areas
      • 1.6% fail on Component mounting
      • 1.6% fail on Spring mounting
    • 1.6% fail on Leaf springs
      • 1.6% fail on Condition
    • 1.6% fail on Anti-roll bars
      • 1.6% fail on Attachment
    • 1.6% fail on Wheel bearings
      • 1.6% fail on Rear
    • 1.6% fail on Front suspension retaining and locking devices
  • 4.9% fail on Tyres
    • 3.3% fail on Tread depth
    • 1.6% fail on Valve stem
  • 4.9% fail on Seat Belts and Supplementary Restraint Systems
    • 4.9% fail on Seat belts
      • 4.9% fail on Prescribed areas
  • 3.3% fail on Steering
    • 3.3% fail on Steering system
      • 3.3% fail on Steering rack
  • 3.3% fail on Driver's view of the road
    • 1.6% fail on Wipers
    • 1.6% fail on Washers