Isuzu TF MOT Results
Registered in 200261.0% pass rate
from 41 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2002 vans and highlighted areas where the Isuzu TF is unusually good or bad.
-
22% fail on
Lamps, reflectors and electrical equipment
-
12% fail on
Headlamps
- 12% fail on Headlamp (2 times worse than other 2002 vans)
-
7.3% fail on
Front and rear fog lamps
-
7.3% fail on
Rear fog lamp
- 7.3% fail on Rear fog lamp
-
7.3% fail on
Rear fog lamp
- 4.9% fail on Stop lamp
-
2.4% fail on
Headlamp aim
- 2.4% fail on Headlamp aim not tested
-
2.4% fail on
Direction indicators
-
2.4% fail on
Flashing type
- 2.4% fail on Individual direction indicators
-
2.4% fail on
Flashing type
-
12% fail on
Headlamps
-
20% fail on
Brakes
- 4.9% fail on Rigid brake pipes
- 4.9% fail on Load sensing valves
-
4.9% fail on
Brake performance
-
2.4% fail on
Service brake performance
-
2.4% fail on
Rbt
- 2.4% fail on Service brake performance
-
2.4% fail on
Rbt
-
2.4% fail on
Parking brake efficiency (sp)
- 2.4% fail on Rbt (sp)
-
2.4% fail on
Service brake performance
-
2.4% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 2.4% fail on Hydraulic brake cylinder
-
2.4% fail on
Mechanical brake components
-
2.4% fail on
Brake linings and pads
- 2.4% fail on Brake pads
-
2.4% fail on
Brake linings and pads
-
17% fail on
Visibility
- 9.8% fail on Washers
- 7.3% fail on Wipers
-
17% fail on
Body, chassis, structure
-
9.8% fail on
Transmission
-
9.8% fail on
Drive shafts
- 9.8% fail on Joints
-
9.8% fail on
Drive shafts
- 4.9% fail on Exhaust system
-
4.9% fail on
Body
- 2.4% fail on Mounting fixings
- 2.4% fail on Panel
-
2.4% fail on
Chassis
- 2.4% fail on Chassis condition
-
9.8% fail on
Transmission
-
15% fail on
Suspension
-
7.3% fail on
Springs
-
4.9% fail on
Leaf springs
- 2.4% fail on Leaf spring
- 2.4% fail on Shackle pins and bushes
- 2.4% fail on Spring mounting prescribed areas
-
4.9% fail on
Leaf springs
-
2.4% fail on
Suspension arms
- 2.4% fail on Ball joint
-
2.4% fail on
Other suspension component
- 2.4% fail on Ball joint dust cover
- 2.4% fail on Component mounting prescribed areas
-
7.3% fail on
Springs
-
2.4% fail on
Identification of the vehicle
- 2.4% fail on Registration plates
-
2.4% fail on
Steering
-
2.4% fail on
Steering linkage components
- 2.4% fail on Track rod end
-
2.4% fail on
Steering linkage components
-
2.4% fail on
Noise, emissions and leaks
-
2.4% fail on
Exhaust emissions
-
2.4% fail on
Compression ignition
- 2.4% fail on Pre 01/07/2008 Non turbo
-
2.4% fail on
Compression ignition
-
2.4% fail on
Exhaust emissions