IVECO Daily MOT Results

Registered in 1997
56.7% pass rate
from 134 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 vans and highlighted areas where the IVECO Daily is unusually good or bad.

  • 28% fail on Lamps, reflectors and electrical equipment
    • 11% fail on Position lamps (2 times worse than other 1997 vans)
      • 10% fail on Position lamp (2 times worse than other 1997 vans)
      • 0.75% fail on All position lamps
    • 6.0% fail on Front and rear fog lamps
      • 6.0% fail on Rear fog lamp
        • 6.0% fail on Rear fog lamp
    • 5.2% fail on Registration plate lamp(s)
    • 4.5% fail on Headlamps
      • 2.2% fail on Headlamp
      • 1.5% fail on Headlamp levelling device
      • 0.75% fail on Dipswitch
    • 4.5% fail on Direction indicators
      • 4.5% fail on Flashing type
        • 3.0% fail on Side repeaters
        • 1.5% fail on Individual direction indicators
    • 4.5% fail on Electrical equipment
      • 3.0% fail on Battery(ies)
      • 1.5% fail on Horn
    • 3.7% fail on Stop lamp
    • 2.2% fail on Headlamp aim
      • 2.2% fail on Headlamp aim
    • 0.75% fail on Outline marker lamps
      • 0.75% fail on Outline marker lamp
    • 0.75% fail on Rear reflectors
    • 0.75% fail on Mandatory tell-tales
      • 0.75% fail on Rear fog lamp tell-tale
  • 25% fail on Brakes (50% worse than other 1997 vans)
    • 24% fail on Brake performance (120% worse than other 1997 vans)
      • 16% fail on Parking brake efficiency (sp) (2 times worse than other 1997 vans)
        • 16% fail on Rbt (sp) (2 times worse than other 1997 vans)
      • 10% fail on Service brake performance (110% worse than other 1997 vans)
        • 10% fail on Rbt (110% worse than other 1997 vans)
          • 10% fail on Service brake performance (160% worse than other 1997 vans)
      • 6.7% fail on Service Brake Efficiency (sp)
        • 6.7% fail on Rbt (sp)
          • 5.2% fail on Service brake performance
          • 1.5% fail on Service brake imbalance
      • 6.0% fail on Parking brake performance (2 times worse than other 1997 vans)
        • 6.0% fail on Rbt (2 times worse than other 1997 vans)
          • 5.2% fail on Parking brake performance (2 times worse than other 1997 vans)
          • 0.75% fail on Parking (secondary brake performance)
      • 0.75% fail on Brake performance not tested
    • 3.0% fail on Rigid brake pipes
    • 1.5% fail on Mechanical brake components
      • 1.5% fail on Brake linings and pads
        • 1.5% fail on Brake pads
      • 0.75% fail on Brake discs and drums
        • 0.75% fail on Brake discs
    • 0.75% fail on Hydraulic systems
      • 0.75% fail on Master cylinder
    • 0.75% fail on Other components and prescribed areas
      • 0.75% fail on Prescribed areas
        • 0.75% fail on Master cylinder/servo mounting
  • 16% fail on Suspension
    • 5.2% fail on Component mounting prescribed areas
    • 3.0% fail on Anti-roll bars
      • 1.5% fail on Pins and bushes
      • 0.75% fail on Attachment bracket and mounting
      • 0.75% fail on Linkage pins and bushes
    • 2.2% fail on Springs
      • 1.5% fail on Torsion bars (115 times worse than other 1997 vans)
        • 1.5% fail on Torsion bar (115 times worse than other 1997 vans)
      • 0.75% fail on Leaf springs
        • 0.75% fail on Fixings and fixing bolts
    • 2.2% fail on Suspension arms
      • 1.5% fail on Ball joint
      • 0.75% fail on Ball joint dust cover
    • 2.2% fail on Suspension rods (20 times worse than other 1997 vans)
      • 0.75% fail on Attachment bracket and mounting
      • 0.75% fail on Ball joint
      • 0.75% fail on Ball joint dust cover
    • 1.5% fail on Wheel bearings
    • 1.5% fail on Shock absorbers
  • 13% fail on Visibility
    • 6.7% fail on Wipers
    • 5.2% fail on Washers
    • 2.2% fail on Bonnet (5 times worse than other 1997 vans)
    • 0.75% fail on View to rear
      • 0.75% fail on Mirrors
  • 13% fail on Body, chassis, structure
    • 6.0% fail on Exhaust system
    • 3.7% fail on Fuel system
      • 1.5% fail on Pipe
      • 1.5% fail on Fuel cap/sealing device
      • 0.75% fail on System
    • 2.2% fail on Integral vehicle structure
      • 2.2% fail on Integral vehicle structure condition
    • 2.2% fail on Chassis
      • 1.5% fail on Chassis condition
      • 0.75% fail on Strengthening plate
    • 0.75% fail on Towbar
      • 0.75% fail on Vehicle structure
    • 0.75% fail on Transmission
      • 0.75% fail on Prop shafts
        • 0.75% fail on Prop shaft
    • 0.75% fail on Engine mounting
      • 0.75% fail on Engine mounting condition
    • 0.75% fail on Body
      • 0.75% fail on Mounting fixings
    • 0.75% fail on Cabs
      • 0.75% fail on Prescribed areas
  • 4.5% fail on Tyres
    • 3.0% fail on Condition
    • 2.2% fail on Tread depth
    • 0.75% fail on Size/type
  • 3.7% fail on Steering
    • 2.2% fail on Steering linkage components
      • 1.5% fail on Track rod end
      • 0.75% fail on Drag link end
    • 0.75% fail on Steering gear
      • 0.75% fail on Steering rack
    • 0.75% fail on Prescribed areas
    • 0.75% fail on Steering column
    • 0.75% fail on Steering coupling
      • 0.75% fail on Universal joint
  • 3.7% fail on Noise, emissions and leaks
    • 2.2% fail on Exhaust emissions
      • 2.2% fail on Compression ignition
        • 1.5% fail on Pre 01/07/2008 Turbo
        • 0.75% fail on Emissions not tested
    • 1.5% fail on Fluid leaks
      • 1.5% fail on Engine oil leaks
  • 3.0% fail on Seat belts and supplementary restraint systems
    • 3.0% fail on Seat belts
      • 2.2% fail on Prescribed areas
      • 0.75% fail on Condition
  • 0.75% fail on Identification of the vehicle
    • 0.75% fail on Registration plates
  • 0.75% fail on Road Wheels
    • 0.75% fail on Attachment