IVECO Daily MOT Results

Registered in 2012
58.0% pass rate
from 2,481 tests in 2020
(8.5% worse than other 2012 vans)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the IVECO Daily is unusually good or bad.

  • 27% fail on Lamps, reflectors and electrical equipment (32% worse than other 2012 vans)
    • 7.5% fail on Registration plate lamp(s)
    • 6.6% fail on Direction indicators (150% worse than other 2012 vans)
      • 6.6% fail on Flashing type (150% worse than other 2012 vans)
        • 3.8% fail on Individual direction indicators (110% worse than other 2012 vans)
        • 3.0% fail on Side repeaters (2 times worse than other 2012 vans)
        • 0.28% fail on All direction indicators
      • 0.040% fail on Semaphore
        • 0.040% fail on Arm
    • 5.8% fail on Headlamp aim (54% worse than other 2012 vans)
      • 5.5% fail on Headlamp aim (55% worse than other 2012 vans)
      • 0.36% fail on Headlamp aim not tested
    • 5.8% fail on Headlamps (82% worse than other 2012 vans)
      • 5.6% fail on Headlamp (85% worse than other 2012 vans)
      • 0.081% fail on Headlamp levelling device
      • 0.040% fail on Dipswitch
    • 4.8% fail on Position lamps
      • 4.7% fail on Position lamp
      • 0.20% fail on All position lamps
    • 4.7% fail on Stop lamp
    • 2.8% fail on Front and rear fog lamps (88% worse than other 2012 vans)
      • 2.8% fail on Rear fog lamp (88% worse than other 2012 vans)
        • 2.8% fail on Rear fog lamp (87% worse than other 2012 vans)
        • 0.12% fail on Switch (4 times worse than other 2012 vans)
    • 2.3% fail on Outline marker lamps (3 times worse than other 2012 vans)
      • 1.9% fail on Outline marker lamp (3 times worse than other 2012 vans)
      • 0.36% fail on All outline marker lamps (5 times worse than other 2012 vans)
    • 1.4% fail on Electrical equipment (66% worse than other 2012 vans)
      • 0.64% fail on Horn
      • 0.40% fail on Battery(ies) (4 times worse than other 2012 vans)
      • 0.20% fail on Trailer electrical socket
      • 0.20% fail on Electrical wiring
    • 1.2% fail on Reversing lamps (130% worse than other 2012 vans)
      • 1.1% fail on Reversing lamps (130% worse than other 2012 vans)
      • 0.040% fail on Reversing lamp switch
    • 0.20% fail on Daytime running lamps (17 times worse than other 2012 vans)
    • 0.12% fail on Hazard warning
      • 0.12% fail on Switch
    • 0.12% fail on Rear reflectors
    • 0.040% fail on Mandatory tell-tales
      • 0.040% fail on Main beam tell-tale
      • 0.040% fail on Rear fog lamp tell-tale
  • 16% fail on Brakes (40% worse than other 2012 vans)
    • 11% fail on Brake performance (130% worse than other 2012 vans)
      • 8.6% fail on Parking brake efficiency (sp) (160% worse than other 2012 vans)
        • 8.5% fail on Rbt (sp) (160% worse than other 2012 vans)
        • 0.12% fail on Decelerometer (sp)
      • 3.5% fail on Service brake performance (130% worse than other 2012 vans)
        • 3.4% fail on Rbt (130% worse than other 2012 vans)
          • 2.7% fail on Service brake performance (140% worse than other 2012 vans)
          • 1.0% fail on Service brake imbalance (140% worse than other 2012 vans)
        • 0.12% fail on Plate brake tester (4 times worse than other 2012 vans)
          • 0.12% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles) (5 times worse than other 2012 vans)
      • 3.5% fail on Parking brake performance (190% worse than other 2012 vans)
        • 3.4% fail on Rbt (190% worse than other 2012 vans)
          • 3.2% fail on Parking brake performance (2 times worse than other 2012 vans)
          • 0.24% fail on Parking (secondary brake performance)
        • 0.081% fail on Plate brake tester
          • 0.081% fail on Parking (secondary brake performance)
      • 0.85% fail on Service Brake Efficiency (sp)
        • 0.85% fail on Rbt (sp)
          • 0.52% fail on Service brake performance
          • 0.48% fail on Service brake imbalance
      • 0.12% fail on Brake performance not tested
    • 3.2% fail on Mechanical brake components (27% better than other 2012 vans)
      • 2.1% fail on Brake linings and pads (41% better than other 2012 vans)
        • 2.1% fail on Brake pads (40% better than other 2012 vans)
      • 0.97% fail on Brake cables, rods, levers and linkages (2 times worse than other 2012 vans)
        • 0.81% fail on Cable (3 times worse than other 2012 vans)
        • 0.12% fail on Lever
        • 0.12% fail on Linkage (5 times worse than other 2012 vans)
      • 0.52% fail on Brake discs and drums (58% better than other 2012 vans)
        • 0.52% fail on Brake discs (57% better than other 2012 vans)
    • 3.2% fail on ABS / EBS / ESC (3 times worse than other 2012 vans)
      • 2.8% fail on Anti-lock braking system (4 times worse than other 2012 vans)
      • 1.4% fail on Electronic stability control (3 times worse than other 2012 vans)
      • 0.040% fail on Electronic braking system
    • 1.0% fail on Parking brake control (98% worse than other 2012 vans)
      • 0.97% fail on Lever (91% worse than other 2012 vans)
      • 0.040% fail on Electronic parking brake
    • 0.60% fail on Brake actuators (including spring brakes or hydraulic cylinders) (2 times worse than other 2012 vans)
      • 0.60% fail on Hydraulic brake callipers (3 times worse than other 2012 vans)
    • 0.44% fail on Flexible brake hoses
    • 0.40% fail on Service brake pedal or hand lever
      • 0.40% fail on Pedal
    • 0.20% fail on Hydraulic systems
      • 0.12% fail on Brake fluid
      • 0.081% fail on Reservoirs
    • 0.12% fail on Other components and prescribed areas (10 times worse than other 2012 vans)
      • 0.081% fail on Other components (8 times worse than other 2012 vans)
      • 0.040% fail on Prescribed areas
        • 0.040% fail on Master cylinder/servo mounting
    • 0.040% fail on Load sensing valves
  • 13% fail on Suspension (23% worse than other 2012 vans)
    • 5.4% fail on Suspension arms (61% worse than other 2012 vans)
      • 3.6% fail on Ball joint (120% worse than other 2012 vans)
      • 1.7% fail on Pins and bushes
      • 0.36% fail on Ball joint dust cover
      • 0.081% fail on Suspension arm
      • 0.040% fail on Attachment bracket and mounting
    • 5.2% fail on Anti-roll bars (39% worse than other 2012 vans)
      • 3.3% fail on Pins and bushes (3 times worse than other 2012 vans)
      • 2.1% fail on Linkage pins and bushes (2 times worse than other 2012 vans)
      • 0.32% fail on Anti-roll bar (6 times worse than other 2012 vans)
      • 0.28% fail on Linkage attachment bracket and mounting (17 times worse than other 2012 vans)
      • 0.16% fail on Attachment bracket and mounting (4 times worse than other 2012 vans)
      • 0.16% fail on Linkage
      • 0.040% fail on Linkage ball joints
    • 3.7% fail on Springs (35% worse than other 2012 vans)
      • 3.6% fail on Leaf springs (4 times worse than other 2012 vans)
        • 1.6% fail on Shackle pins and bushes (22 times worse than other 2012 vans)
        • 0.89% fail on Fixings and fixing bolts (7 times worse than other 2012 vans)
        • 0.56% fail on Anchor pins and bushes (15 times worse than other 2012 vans)
        • 0.32% fail on Spring saddle (21 times worse than other 2012 vans)
        • 0.28% fail on Leaf spring
        • 0.16% fail on Shackle bracket (10 times worse than other 2012 vans)
        • 0.12% fail on Anchor bracket (6 times worse than other 2012 vans)
      • 0.040% fail on Torsion bars
        • 0.040% fail on Torsion bar
    • 1.3% fail on Shock absorbers (69% worse than other 2012 vans)
    • 0.56% fail on Other suspension component
      • 0.40% fail on Ball joint
      • 0.12% fail on Other suspension component (8 times worse than other 2012 vans)
      • 0.040% fail on Attachment bracket and mounting
      • 0.040% fail on Ball joint dust cover
    • 0.32% fail on Axles (8 times worse than other 2012 vans)
      • 0.32% fail on Axle (18 times worse than other 2012 vans)
    • 0.24% fail on Sub-frames (3 times worse than other 2012 vans)
      • 0.20% fail on Sub-frame (20 times worse than other 2012 vans)
      • 0.040% fail on Sub-frame mounting prescribed areas
    • 0.16% fail on Wheel bearings (85% better than other 2012 vans)
    • 0.081% fail on Component mounting prescribed areas
    • 0.040% fail on Suspension rods
      • 0.040% fail on Pins and bushes
  • 7.7% fail on Visibility
    • 3.3% fail on Wipers
    • 2.9% fail on Washers
    • 1.2% fail on View to rear (82% worse than other 2012 vans)
      • 1.1% fail on Mirrors (72% worse than other 2012 vans)
      • 0.081% fail on Indirect vision devices (6 times worse than other 2012 vans)
    • 0.77% fail on Condition of glass
      • 0.77% fail on Windscreen
    • 0.52% fail on Bonnet (3 times worse than other 2012 vans)
    • 0.12% fail on Driver's view
  • 6.0% fail on Noise, emissions and leaks (56% worse than other 2012 vans)
    • 5.8% fail on Exhaust emissions (63% worse than other 2012 vans)
      • 4.4% fail on Compression ignition (61% worse than other 2012 vans)
        • 2.7% fail on Malfunction indicator lamp (67% worse than other 2012 vans)
        • 1.1% fail on On or after 01/07/2008
        • 0.64% fail on Emissions not tested (2 times worse than other 2012 vans)
        • 0.081% fail on Pre 01/07/2008 Turbo
        • 0.040% fail on Emission control equipment
          • 0.040% fail on Other emission control equipment
        • 0.040% fail on On or after 01/01/2014
      • 1.5% fail on Spark ignition (76% worse than other 2012 vans)
        • 1.4% fail on Malfunction indicator lamp (65% worse than other 2012 vans)
        • 0.081% fail on Catalyst emissions
        • 0.081% fail on Emissions not tested
    • 0.24% fail on Fluid leaks
      • 0.20% fail on Engine oil leaks
      • 0.040% fail on Other leaks
  • 5.9% fail on Body, chassis, structure
    • 2.7% fail on Exhaust system (3 times worse than other 2012 vans)
    • 1.0% fail on Fuel system (140% worse than other 2012 vans)
      • 0.69% fail on Fuel cap/sealing device (3 times worse than other 2012 vans)
      • 0.28% fail on System (2 times worse than other 2012 vans)
      • 0.081% fail on Pipe
    • 0.97% fail on Body (170% worse than other 2012 vans)
      • 0.64% fail on Other body component (140% worse than other 2012 vans)
      • 0.20% fail on Mounting fixings (22 times worse than other 2012 vans)
      • 0.081% fail on Panel
      • 0.040% fail on Body condition
    • 0.73% fail on Transmission (77% better than other 2012 vans)
      • 0.73% fail on Prop shafts (170% worse than other 2012 vans)
        • 0.48% fail on Prop shaft (7 times worse than other 2012 vans)
        • 0.16% fail on Flexible couplings (10 times worse than other 2012 vans)
        • 0.081% fail on Bearing housing (5 times worse than other 2012 vans)
        • 0.040% fail on Joints
    • 0.44% fail on Doors
      • 0.24% fail on Driver's door (2 times worse than other 2012 vans)
        • 0.24% fail on Door condition (3 times worse than other 2012 vans)
      • 0.16% fail on Front passenger's door
        • 0.12% fail on Door condition
        • 0.040% fail on Hinge
      • 0.081% fail on Other passenger's door
        • 0.081% fail on Door condition
    • 0.36% fail on Load security (7 times worse than other 2012 vans)
      • 0.28% fail on Loading door (11 times worse than other 2012 vans)
      • 0.081% fail on Dropside (7 times worse than other 2012 vans)
        • 0.040% fail on Dropside condition
        • 0.040% fail on Other dropside component
      • 0.040% fail on Tailgate
    • 0.24% fail on Bumpers
    • 0.20% fail on Integral vehicle structure (11 times worse than other 2012 vans)
      • 0.12% fail on Sub-frame (62 times worse than other 2012 vans)
        • 0.12% fail on Sub-frame condition (62 times worse than other 2012 vans)
      • 0.040% fail on Integral vehicle structure condition
      • 0.040% fail on Strengthening plate
    • 0.081% fail on Cabs (15 times worse than other 2012 vans)
      • 0.081% fail on Mounting fixings (55 times worse than other 2012 vans)
    • 0.040% fail on Chassis
      • 0.040% fail on Chassis condition
    • 0.040% fail on Spare wheel
      • 0.040% fail on Carrier
    • 0.040% fail on Towbar
      • 0.040% fail on Safety device
    • 0.040% fail on Seats
      • 0.040% fail on Driver's seat
  • 5.1% fail on Tyres
    • 2.7% fail on Condition
    • 2.6% fail on Tread depth
    • 0.24% fail on Size/type
  • 3.7% fail on Seat belts and supplementary restraint systems (170% worse than other 2012 vans)
    • 3.0% fail on SRS malfunction indicator lamp (3 times worse than other 2012 vans)
    • 0.73% fail on Seat belts
      • 0.73% fail on Condition
    • 0.20% fail on Airbags (6 times worse than other 2012 vans)
      • 0.20% fail on Drivers airbag (7 times worse than other 2012 vans)
  • 1.4% fail on Steering (53% better than other 2012 vans)
    • 1.1% fail on Steering linkage components (55% better than other 2012 vans)
      • 0.93% fail on Track rod end (60% better than other 2012 vans)
      • 0.20% fail on Ball joint
    • 0.12% fail on Power steering
      • 0.040% fail on Pipes and hoses
      • 0.040% fail on Pump
      • 0.040% fail on Other components
    • 0.081% fail on Steering gear
      • 0.040% fail on Operation
      • 0.040% fail on Steering rack
    • 0.040% fail on Steering column
    • 0.040% fail on Steering play
      • 0.040% fail on Steering rack
  • 0.93% fail on Identification of the vehicle
    • 0.81% fail on Registration plates
    • 0.12% fail on Vehicle Identification Number (22 times worse than other 2012 vans)
  • 0.44% fail on Road Wheels
    • 0.40% fail on Attachment (160% worse than other 2012 vans)
    • 0.040% fail on Condition
  • 0.040% fail on Speedometer and speed limiter
    • 0.040% fail on Speedometer