MOT Results

Honest John Vans MOT Results » Peugeot » Expert » 1997

Peugeot Expert MOT Results

Registered in 1997
49.3% pass rate
from 73 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 vans and highlighted areas where the Peugeot Expert is unusually good or bad.

  • 22% fail on Body, chassis, structure
    • 14% fail on Transmission (2 times worse than other 1997 vans)
      • 14% fail on Drive shafts (4 times worse than other 1997 vans)
        • 14% fail on Joints (4 times worse than other 1997 vans)
    • 4.1% fail on Exhaust system
    • 2.7% fail on Fuel system
      • 2.7% fail on Tank (14 times worse than other 1997 vans)
    • 1.4% fail on Integral vehicle structure
      • 1.4% fail on Integral vehicle structure condition
    • 1.4% fail on Towbar
      • 1.4% fail on Vehicle structure
    • 1.4% fail on Body
      • 1.4% fail on Other body component
    • 1.4% fail on Load security
      • 1.4% fail on Loading door
    • 1.4% fail on Doors
      • 1.4% fail on Other passenger's door
        • 1.4% fail on Door condition
  • 16% fail on Brakes
    • 12% fail on Brake performance
      • 9.6% fail on Service Brake Efficiency (sp)
        • 9.6% fail on Rbt (sp)
          • 8.2% fail on Service brake imbalance
          • 1.4% fail on Service brake performance
      • 5.5% fail on Service brake performance
        • 5.5% fail on Rbt
          • 5.5% fail on Service brake performance
      • 1.4% fail on Brake performance not tested
    • 2.7% fail on Rigid brake pipes
    • 2.7% fail on Flexible brake hoses
    • 1.4% fail on Load sensing valves
    • 1.4% fail on Mechanical brake components
      • 1.4% fail on Brake linings and pads
        • 1.4% fail on Brake pads
  • 16% fail on Suspension
    • 5.5% fail on Component mounting prescribed areas
    • 4.1% fail on Springs
      • 2.7% fail on Coil springs
        • 2.7% fail on Coil spring
      • 1.4% fail on Spring mounting prescribed areas
    • 4.1% fail on Suspension arms
      • 4.1% fail on Ball joint
      • 1.4% fail on Pins and bushes
      • 1.4% fail on Ball joint dust cover
    • 2.7% fail on Sub-frames
      • 1.4% fail on Sub-frame
      • 1.4% fail on Sub-frame mounting prescribed areas
    • 1.4% fail on Shock absorbers
  • 14% fail on Visibility
    • 8.2% fail on Washers
    • 5.5% fail on Wipers
    • 1.4% fail on View to rear
      • 1.4% fail on Mirrors
  • 11% fail on Lamps, reflectors and electrical equipment
    • 4.1% fail on Headlamps
      • 2.7% fail on Headlamp
      • 2.7% fail on Headlamp levelling device (6 times worse than other 1997 vans)
    • 4.1% fail on Headlamp aim
      • 4.1% fail on Headlamp aim
    • 2.7% fail on Stop lamp
    • 1.4% fail on Registration plate lamp(s)
    • 1.4% fail on Electrical equipment
      • 1.4% fail on Battery(ies)
  • 6.8% fail on Tyres
    • 5.5% fail on Condition
    • 1.4% fail on Tread depth
  • 4.1% fail on Identification of the vehicle (4 times worse than other 1997 vans)
    • 4.1% fail on Registration plates (4 times worse than other 1997 vans)
  • 4.1% fail on Steering
    • 2.7% fail on Steering linkage components
      • 1.4% fail on Ball joint
      • 1.4% fail on Track rod end
    • 1.4% fail on Power steering
      • 1.4% fail on Operation
      • 1.4% fail on Pipes and hoses
      • 1.4% fail on Other components
  • 2.7% fail on Seat belts and supplementary restraint systems
    • 1.4% fail on Seat belts
      • 1.4% fail on Requirements
    • 1.4% fail on SRS malfunction indicator lamp
  • 1.4% fail on Seat belt installation check
    • 1.4% fail on Anchorages
  • 1.4% fail on Road Wheels
    • 1.4% fail on Attachment