MOT Results

Honest John Vans MOT Results » Peugeot » Expert » 2012

Peugeot Expert MOT Results

Registered in 2012
56.8% pass rate
from 2,793 tests in 2021
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Peugeot Expert is unusually good or bad.

  • 18% fail on Lamps, reflectors and electrical equipment
    • 5.9% fail on Stop lamp
    • 4.0% fail on Headlamps
      • 3.8% fail on Headlamp
      • 0.14% fail on Headlamp levelling device
      • 0.036% fail on Dipswitch
    • 3.7% fail on Headlamp aim
      • 3.3% fail on Headlamp aim
      • 0.39% fail on Headlamp aim not tested
    • 3.3% fail on Registration plate lamp(s) (47% better than other 2012 vans)
    • 3.2% fail on Direction indicators
      • 3.2% fail on Flashing type
        • 2.8% fail on Individual direction indicators (43% worse than other 2012 vans)
        • 0.29% fail on Side repeaters (67% better than other 2012 vans)
        • 0.036% fail on All direction indicators
    • 1.9% fail on Front and rear fog lamps
      • 1.9% fail on Rear fog lamp
        • 1.9% fail on Rear fog lamp
    • 0.36% fail on Hazard warning
      • 0.36% fail on Switch
    • 0.36% fail on Electrical equipment
      • 0.18% fail on Horn
      • 0.14% fail on Electrical wiring
      • 0.072% fail on Trailer electrical socket
    • 0.25% fail on Position lamps
      • 0.25% fail on Position lamp
    • 0.14% fail on Reversing lamps (77% better than other 2012 vans)
      • 0.14% fail on Reversing lamps (76% better than other 2012 vans)
    • 0.072% fail on Rear reflectors
  • 15% fail on Body, chassis, structure (130% worse than other 2012 vans)
    • 11% fail on Transmission (160% worse than other 2012 vans)
      • 11% fail on Drive shafts (180% worse than other 2012 vans)
        • 11% fail on Joints (180% worse than other 2012 vans)
        • 0.036% fail on Drive shaft
      • 0.25% fail on Prop shafts
        • 0.25% fail on Joints
    • 4.6% fail on Exhaust system (3 times worse than other 2012 vans)
    • 0.86% fail on Doors (200% worse than other 2012 vans)
      • 0.72% fail on Other passenger's door (5 times worse than other 2012 vans)
        • 0.68% fail on Door condition (5 times worse than other 2012 vans)
        • 0.036% fail on Catch
      • 0.14% fail on Front passenger's door
        • 0.14% fail on Door condition
    • 0.18% fail on Fuel system
      • 0.072% fail on Tank
      • 0.072% fail on Pipe
      • 0.036% fail on Fuel cap/sealing device
    • 0.18% fail on Bumpers
    • 0.18% fail on Engine mounting
      • 0.18% fail on Engine mounting condition
    • 0.18% fail on Seats
      • 0.14% fail on Passenger's seat
      • 0.036% fail on Driver's seat
    • 0.11% fail on Spare wheel
      • 0.072% fail on Spare wheel condition
      • 0.036% fail on Carrier
    • 0.036% fail on Body
      • 0.036% fail on Other body component
    • 0.036% fail on Load security
      • 0.036% fail on Loading door
    • 0.036% fail on Boot lid
      • 0.036% fail on Other boot lid component
  • 11% fail on Suspension (16% better than other 2012 vans)
    • 6.8% fail on Suspension arms (45% worse than other 2012 vans)
      • 5.9% fail on Ball joint (150% worse than other 2012 vans)
      • 0.79% fail on Ball joint dust cover (120% worse than other 2012 vans)
      • 0.21% fail on Pins and bushes (90% better than other 2012 vans)
      • 0.072% fail on Suspension arm
      • 0.036% fail on Attachment bracket and mounting
    • 2.0% fail on Anti-roll bars (59% better than other 2012 vans)
      • 0.86% fail on Linkage ball joints (55% better than other 2012 vans)
      • 0.57% fail on Linkage ball joint dust cover
      • 0.43% fail on Ball joint dust cover
      • 0.18% fail on Ball joint (65% better than other 2012 vans)
      • 0.036% fail on Attachment bracket and mounting
      • 0.036% fail on Pins and bushes
      • 0.036% fail on Linkage
    • 1.7% fail on Springs (55% better than other 2012 vans)
      • 1.7% fail on Coil springs (43% better than other 2012 vans)
        • 1.7% fail on Coil spring (44% better than other 2012 vans)
        • 0.036% fail on Mounting
    • 1.1% fail on Wheel bearings
    • 0.47% fail on Shock absorbers
    • 0.47% fail on Other suspension component
      • 0.36% fail on Ball joint
      • 0.072% fail on Ball joint dust cover
      • 0.036% fail on Pins and bushes
    • 0.11% fail on Sub-frames
      • 0.036% fail on Sub-frame
      • 0.036% fail on Attachment bracket and mounting
      • 0.036% fail on Ball joint
    • 0.11% fail on Air/gas/fluid suspension (18 times worse than other 2012 vans)
      • 0.072% fail on Suspension unit (46 times worse than other 2012 vans)
      • 0.036% fail on Operation
    • 0.072% fail on Component mounting prescribed areas
    • 0.036% fail on Axles
      • 0.036% fail on Swivel pins and bushes
    • 0.036% fail on Macpherson strut
      • 0.036% fail on Macpherson strut
  • 9.7% fail on Brakes (24% better than other 2012 vans)
    • 4.6% fail on Brake performance (28% better than other 2012 vans)
      • 2.6% fail on Parking brake efficiency (sp) (40% better than other 2012 vans)
        • 2.6% fail on Rbt (sp) (40% better than other 2012 vans)
      • 1.6% fail on Service brake performance
        • 1.6% fail on Rbt
          • 1.5% fail on Service brake performance
          • 0.25% fail on Service brake imbalance
      • 1.0% fail on Parking brake performance
        • 1.0% fail on Rbt
          • 0.90% fail on Parking brake performance
          • 0.072% fail on Parking (secondary brake performance)
          • 0.036% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
        • 0.036% fail on Decelerometer
          • 0.036% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.61% fail on Service Brake Efficiency (sp)
        • 0.57% fail on Rbt (sp)
          • 0.43% fail on Service brake performance
          • 0.21% fail on Service brake imbalance
        • 0.036% fail on Plate brake tester (sp)
          • 0.036% fail on Service brake performance
      • 0.14% fail on Brake performance not tested
    • 4.2% fail on Mechanical brake components
      • 2.9% fail on Brake linings and pads
        • 2.9% fail on Brake pads
      • 1.2% fail on Brake discs and drums
        • 1.2% fail on Brake discs
      • 0.36% fail on Brake cables, rods, levers and linkages
        • 0.29% fail on Cable
        • 0.036% fail on Lever
        • 0.036% fail on Relay lever
    • 1.4% fail on Service brake pedal or hand lever (140% worse than other 2012 vans)
      • 1.1% fail on Pedal (140% worse than other 2012 vans)
      • 0.25% fail on Hand lever
    • 0.36% fail on Flexible brake hoses
    • 0.32% fail on ABS / EBS / ESC (71% better than other 2012 vans)
      • 0.25% fail on Anti-lock braking system (72% better than other 2012 vans)
      • 0.072% fail on Electronic braking system
      • 0.072% fail on Electronic stability control (84% better than other 2012 vans)
    • 0.29% fail on Parking brake control
      • 0.29% fail on Lever
    • 0.14% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.14% fail on Hydraulic brake callipers
    • 0.11% fail on Rigid brake pipes (96% better than other 2012 vans)
    • 0.072% fail on Hydraulic systems
      • 0.072% fail on Brake fluid
  • 8.3% fail on Visibility
    • 4.2% fail on Wipers
    • 4.0% fail on Washers
    • 0.36% fail on Condition of glass
      • 0.36% fail on Windscreen
    • 0.25% fail on View to rear (59% better than other 2012 vans)
      • 0.25% fail on Mirrors
  • 4.9% fail on Noise, emissions and leaks
    • 4.6% fail on Exhaust emissions
      • 4.0% fail on Compression ignition
        • 2.1% fail on Malfunction indicator lamp
        • 1.8% fail on On or after 01/07/2008 (52% worse than other 2012 vans)
        • 0.32% fail on Emissions not tested
        • 0.11% fail on Pre 01/07/2008 Turbo
        • 0.036% fail on Emission control equipment
          • 0.036% fail on Other emission control equipment
        • 0.036% fail on Pre 01/07/2008 Non turbo
        • 0.036% fail on On or after 01/01/2014
      • 0.61% fail on Spark ignition
        • 0.54% fail on Malfunction indicator lamp
        • 0.072% fail on Catalyst emissions
        • 0.036% fail on Emissions not tested
    • 0.47% fail on Fluid leaks
      • 0.43% fail on Engine oil leaks
      • 0.036% fail on Other leaks
  • 4.9% fail on Tyres
    • 3.5% fail on Tread depth
    • 1.5% fail on Condition (38% better than other 2012 vans)
    • 0.14% fail on Size/type
  • 1.6% fail on Steering (58% better than other 2012 vans)
    • 0.86% fail on Steering linkage components (74% better than other 2012 vans)
      • 0.68% fail on Track rod end (78% better than other 2012 vans)
      • 0.14% fail on Ball joint
      • 0.036% fail on Locking devices
    • 0.50% fail on Power steering
      • 0.25% fail on Other components (2 times worse than other 2012 vans)
      • 0.21% fail on Operation
      • 0.11% fail on Pipes and hoses
    • 0.25% fail on Steering gear
      • 0.25% fail on Steering rack
    • 0.11% fail on Steering wheel (7 times worse than other 2012 vans)
    • 0.036% fail on Steering play
      • 0.036% fail on Steering rack
  • 1.3% fail on Seat belts and supplementary restraint systems
    • 0.97% fail on Seat belts
      • 0.86% fail on Condition
      • 0.11% fail on Attachment
      • 0.036% fail on Prescribed areas
    • 0.29% fail on SRS malfunction indicator lamp (66% better than other 2012 vans)
    • 0.036% fail on Airbags
      • 0.036% fail on Drivers airbag
  • 0.25% fail on Identification of the vehicle
    • 0.25% fail on Registration plates
  • 0.18% fail on Road Wheels
    • 0.18% fail on Attachment