MOT Results

Honest John Vans MOT Results » Toyota » Hi-Ace » 1991
Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

Toyota Hi-Ace MOT Results

Registered in 1991
60.8% pass rate
from 79 tests in 2020
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1991 vans and highlighted areas where the Toyota Hi-Ace is unusually good or bad.

  • 22% fail on Lamps, reflectors and electrical equipment
    • 8.9% fail on Front and rear fog lamps
      • 8.9% fail on Rear fog lamp
        • 8.9% fail on Rear fog lamp
    • 3.8% fail on Headlamp aim
      • 3.8% fail on Headlamp aim
    • 3.8% fail on Electrical equipment
      • 3.8% fail on Horn
    • 2.5% fail on Headlamps
      • 2.5% fail on Headlamp
    • 2.5% fail on Position lamps
      • 2.5% fail on Position lamp
    • 2.5% fail on Stop lamp
    • 1.3% fail on Registration plate lamp(s)
    • 1.3% fail on Rear reflectors
  • 14% fail on Suspension
    • 3.8% fail on Suspension arms
      • 3.8% fail on Ball joint
      • 1.3% fail on Ball joint dust cover
    • 3.8% fail on Component mounting prescribed areas
    • 2.5% fail on Wheel bearings
    • 2.5% fail on Anti-roll bars
      • 1.3% fail on Attachment bracket and mounting
      • 1.3% fail on Linkage pins and bushes
    • 1.3% fail on Springs
      • 1.3% fail on Leaf springs
        • 1.3% fail on Leaf spring
    • 1.3% fail on Shock absorbers
  • 11% fail on Brakes
    • 6.3% fail on Brake performance
      • 5.1% fail on Service brake performance
        • 5.1% fail on Rbt
          • 5.1% fail on Service brake performance
      • 3.8% fail on Service Brake Efficiency (sp)
        • 3.8% fail on Rbt (sp)
          • 3.8% fail on Service brake imbalance
      • 1.3% fail on Parking brake performance
        • 1.3% fail on Rbt
          • 1.3% fail on Parking brake performance
    • 3.8% fail on Mechanical brake components
      • 2.5% fail on Brake linings and pads
        • 2.5% fail on Brake pads
      • 2.5% fail on Brake discs and drums
        • 2.5% fail on Brake discs
    • 2.5% fail on Hydraulic systems
      • 1.3% fail on Reservoirs
      • 1.3% fail on Valves
    • 2.5% fail on Rigid brake pipes
    • 1.3% fail on Service brake pedal or hand lever
      • 1.3% fail on Hand lever
  • 8.9% fail on Visibility
    • 6.3% fail on Washers
    • 3.8% fail on Wipers
    • 1.3% fail on Driver's view
  • 7.6% fail on Body, chassis, structure
    • 2.5% fail on Integral vehicle structure
      • 2.5% fail on Integral vehicle structure condition
    • 2.5% fail on Exhaust system
    • 1.3% fail on Chassis
      • 1.3% fail on Chassis condition
    • 1.3% fail on Seats
      • 1.3% fail on Passenger's seat
  • 5.1% fail on Seat belts and supplementary restraint systems
    • 5.1% fail on Seat belts
      • 2.5% fail on Prescribed areas
      • 2.5% fail on Condition
  • 2.5% fail on Noise, emissions and leaks
    • 2.5% fail on Fluid leaks
      • 2.5% fail on Engine oil leaks
  • 2.5% fail on Tyres
    • 2.5% fail on Tread depth
  • 1.3% fail on Identification of the vehicle
    • 1.3% fail on Registration plates