Toyota Hi-Ace MOT Results
Registered in 201267.3% pass rate
from 159 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Toyota Hi-Ace is unusually good or bad.
-
14% fail on
Lamps, reflectors and electrical equipment
-
3.8% fail on
Headlamp aim
- 3.8% fail on Headlamp aim
-
3.8% fail on
Front and rear fog lamps
-
3.8% fail on
Rear fog lamp
- 3.8% fail on Rear fog lamp
-
3.8% fail on
Rear fog lamp
- 3.1% fail on Stop lamp
-
1.9% fail on
Headlamps
- 1.9% fail on Headlamp
-
0.63% fail on
Position lamps
- 0.63% fail on Position lamp
- 0.63% fail on Registration plate lamp(s)
-
0.63% fail on
Mandatory tell-tales
- 0.63% fail on Rear fog lamp tell-tale
-
3.8% fail on
Headlamp aim
-
10% fail on
Suspension
-
3.8% fail on
Suspension arms
- 3.8% fail on Ball joint
-
3.8% fail on
Anti-roll bars
- 1.3% fail on Linkage pins and bushes
- 1.3% fail on Linkage ball joints
- 0.63% fail on Ball joint dust cover
- 0.63% fail on Linkage attachment bracket and mounting
- 1.9% fail on Component mounting prescribed areas (9 times worse than other 2012 vans)
- 0.63% fail on Wheel bearings
-
0.63% fail on
Springs
- 0.63% fail on Spring mounting prescribed areas
- 0.63% fail on Shock absorbers
-
3.8% fail on
Suspension arms
-
6.9% fail on
Visibility
- 5.7% fail on Wipers
- 1.9% fail on Washers
-
0.63% fail on
View to rear
- 0.63% fail on Mirrors
-
5.7% fail on
Tyres
- 3.8% fail on Tread depth
- 1.9% fail on Condition
-
5.0% fail on
Brakes
(61% better than other 2012 vans)
-
2.5% fail on
Mechanical brake components
-
2.5% fail on
Brake linings and pads
- 2.5% fail on Brake pads
-
2.5% fail on
Brake linings and pads
- 1.9% fail on Rigid brake pipes
-
0.63% fail on
Parking brake control
- 0.63% fail on Lever
-
0.63% fail on
Hydraulic systems
- 0.63% fail on Brake fluid
-
0.63% fail on
ABS / EBS / ESC
- 0.63% fail on Anti-lock braking system
-
2.5% fail on
Mechanical brake components
-
5.0% fail on
Body, chassis, structure
- 2.5% fail on Exhaust system
-
0.63% fail on
Integral vehicle structure
- 0.63% fail on Integral vehicle structure condition
-
0.63% fail on
Fuel system
- 0.63% fail on Tank
- 0.63% fail on Pipe
-
0.63% fail on
Transmission
-
0.63% fail on
Prop shafts
- 0.63% fail on Joints
-
0.63% fail on
Prop shafts
-
0.63% fail on
Body
- 0.63% fail on Panel
-
2.5% fail on
Seat belts and supplementary restraint systems
-
2.5% fail on
Seat belts
- 1.3% fail on Condition
- 0.63% fail on Prescribed areas
- 0.63% fail on Requirements
-
2.5% fail on
Seat belts
-
2.5% fail on
Noise, emissions and leaks
-
2.5% fail on
Exhaust emissions
-
1.9% fail on
Compression ignition
- 1.9% fail on On or after 01/07/2008
-
0.63% fail on
Spark ignition
- 0.63% fail on Malfunction indicator lamp
-
1.9% fail on
Compression ignition
-
2.5% fail on
Exhaust emissions
-
0.63% fail on
Steering
-
0.63% fail on
Steering play
- 0.63% fail on Steering rack
-
0.63% fail on
Steering play
-
0.63% fail on
Road Wheels
- 0.63% fail on Attachment