MOT Results

Honest John Vans MOT Results » Toyota » Hi-Ace » 2013

Toyota Hi-Ace MOT Results

Registered in 2013
67.0% pass rate
from 100 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 vans and highlighted areas where the Toyota Hi-Ace is unusually good or bad.

  • 16% fail on Lamps, reflectors and electrical equipment
    • 7.0% fail on Front and rear fog lamps (3 times worse than other 2013 vans)
      • 7.0% fail on Rear fog lamp (3 times worse than other 2013 vans)
        • 7.0% fail on Rear fog lamp (3 times worse than other 2013 vans)
    • 3.0% fail on Headlamp aim
      • 3.0% fail on Headlamp aim
    • 2.0% fail on Headlamps
      • 2.0% fail on Headlamp
    • 2.0% fail on Stop lamp
    • 2.0% fail on Registration plate lamp(s)
    • 2.0% fail on Electrical equipment
      • 2.0% fail on Battery(ies) (31 times worse than other 2013 vans)
  • 7.0% fail on Suspension
    • 3.0% fail on Component mounting prescribed areas (41 times worse than other 2013 vans)
    • 2.0% fail on Suspension arms
      • 1.0% fail on Ball joint
      • 1.0% fail on Ball joint dust cover
    • 2.0% fail on Anti-roll bars
      • 2.0% fail on Pins and bushes
    • 1.0% fail on Wheel bearings
    • 1.0% fail on Other suspension component
      • 1.0% fail on Ball joint dust cover
  • 7.0% fail on Noise, emissions and leaks
    • 7.0% fail on Exhaust emissions
      • 4.0% fail on Spark ignition (4 times worse than other 2013 vans)
        • 3.0% fail on Catalyst emissions (93 times worse than other 2013 vans)
        • 1.0% fail on Emissions not tested
      • 3.0% fail on Compression ignition
        • 1.0% fail on Pre 01/07/2008 Turbo
        • 1.0% fail on Pre 01/07/2008 Non turbo
        • 1.0% fail on On or after 01/07/2008
  • 6.0% fail on Visibility
    • 4.0% fail on Washers
    • 2.0% fail on Wipers
  • 6.0% fail on Body, chassis, structure
    • 5.0% fail on Transmission
      • 4.0% fail on Drive shafts
        • 4.0% fail on Joints
      • 1.0% fail on Prop shafts
        • 1.0% fail on Joints
    • 1.0% fail on Integral vehicle structure
      • 1.0% fail on Integral vehicle structure condition
  • 3.0% fail on Tyres
    • 2.0% fail on Tread depth
    • 1.0% fail on Size/type
  • 2.0% fail on Brakes (82% better than other 2013 vans)
    • 2.0% fail on Brake performance
      • 1.0% fail on Service brake performance
        • 1.0% fail on Rbt
          • 1.0% fail on Service brake performance
      • 1.0% fail on Service Brake Efficiency (sp)
        • 1.0% fail on Rbt (sp)
          • 1.0% fail on Service brake imbalance
    • 1.0% fail on Rigid brake pipes
  • 2.0% fail on Seat belts and supplementary restraint systems
    • 2.0% fail on Seat belts
      • 1.0% fail on Prescribed areas
      • 1.0% fail on Condition
  • 1.0% fail on Identification of the vehicle
    • 1.0% fail on Registration plates
  • 1.0% fail on Steering
    • 1.0% fail on Steering linkage components
      • 1.0% fail on Track rod end