Vauxhall Brava MOT Results

Registered in 2000
45.6% pass rate
from 103 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 vans and highlighted areas where the Vauxhall Brava is unusually good or bad.

  • 30% fail on Lamps, reflectors and electrical equipment
    • 15% fail on Front and rear fog lamps (2 times worse than other 2000 vans)
      • 15% fail on Rear fog lamp (2 times worse than other 2000 vans)
        • 15% fail on Rear fog lamp (2 times worse than other 2000 vans)
    • 5.8% fail on Headlamps
      • 5.8% fail on Headlamp
    • 5.8% fail on Headlamp aim
      • 4.9% fail on Headlamp aim
      • 0.97% fail on Headlamp aim not tested
    • 4.9% fail on Position lamps
      • 4.9% fail on Position lamp
    • 3.9% fail on Stop lamp
    • 2.9% fail on Direction indicators
      • 2.9% fail on Flashing type
        • 1.9% fail on Individual direction indicators
        • 0.97% fail on Side repeaters
    • 2.9% fail on Registration plate lamp(s)
    • 0.97% fail on Rear reflectors
    • 0.97% fail on Electrical equipment
      • 0.97% fail on Horn
  • 25% fail on Body, chassis, structure (61% worse than other 2000 vans)
    • 6.8% fail on Exhaust system
    • 5.8% fail on Transmission
      • 5.8% fail on Drive shafts
        • 5.8% fail on Joints
      • 0.97% fail on Prop shafts
        • 0.97% fail on Joints
    • 3.9% fail on Integral vehicle structure
      • 3.9% fail on Integral vehicle structure condition
    • 3.9% fail on Bumpers (9 times worse than other 2000 vans)
    • 3.9% fail on Body
      • 1.9% fail on Other body component
      • 0.97% fail on Body condition
      • 0.97% fail on Panel
    • 2.9% fail on Chassis
      • 2.9% fail on Chassis condition
    • 0.97% fail on Fuel system
      • 0.97% fail on Fuel cap/sealing device
    • 0.97% fail on Spare wheel
      • 0.97% fail on Carrier
    • 0.97% fail on Towbar
      • 0.97% fail on Vehicle structure
    • 0.97% fail on Doors
      • 0.97% fail on Other passenger's door
        • 0.97% fail on Door condition
    • 0.97% fail on Cabs
      • 0.97% fail on Prescribed areas
  • 22% fail on Brakes
    • 12% fail on Brake performance
      • 4.9% fail on Service brake performance
        • 4.9% fail on Rbt
          • 4.9% fail on Service brake performance
          • 0.97% fail on Service brake imbalance
      • 3.9% fail on Parking brake efficiency (sp)
        • 3.9% fail on Rbt (sp)
      • 2.9% fail on Service Brake Efficiency (sp)
        • 2.9% fail on Rbt (sp)
          • 2.9% fail on Service brake performance
      • 1.9% fail on Brake performance not tested
      • 0.97% fail on Parking brake performance
        • 0.97% fail on Rbt
          • 0.97% fail on Parking brake performance
    • 8.7% fail on Rigid brake pipes
    • 4.9% fail on Load sensing valves
    • 2.9% fail on Service brake pedal or hand lever (3 times worse than other 2000 vans)
      • 1.9% fail on Hand lever (13 times worse than other 2000 vans)
      • 0.97% fail on Pedal
    • 1.9% fail on Parking brake control
      • 1.9% fail on Lever
    • 1.9% fail on Mechanical brake components
      • 1.9% fail on Brake linings and pads
        • 1.9% fail on Brake pads
  • 22% fail on Suspension
    • 9.7% fail on Suspension arms
      • 6.8% fail on Ball joint
      • 2.9% fail on Ball joint dust cover
      • 1.9% fail on Pins and bushes
    • 8.7% fail on Springs (2 times worse than other 2000 vans)
      • 7.8% fail on Leaf springs (7 times worse than other 2000 vans)
        • 3.9% fail on Shackle pins and bushes (12 times worse than other 2000 vans)
        • 2.9% fail on Anchor pins and bushes (31 times worse than other 2000 vans)
        • 0.97% fail on Leaf spring
      • 0.97% fail on Torsion bars
        • 0.97% fail on Torsion bar
    • 3.9% fail on Component mounting prescribed areas
    • 1.9% fail on Suspension rods (35 times worse than other 2000 vans)
      • 1.9% fail on Suspension rod (81 times worse than other 2000 vans)
    • 1.9% fail on Anti-roll bars
      • 0.97% fail on Attachment bracket and mounting
      • 0.97% fail on Linkage attachment bracket and mounting
    • 0.97% fail on Wheel bearings
    • 0.97% fail on Shock absorbers
  • 13% fail on Visibility
    • 9.7% fail on Washers
    • 4.9% fail on Wipers
  • 6.8% fail on Steering
    • 2.9% fail on Power steering
      • 0.97% fail on Operation
      • 0.97% fail on Pipes and hoses
      • 0.97% fail on Other components
    • 1.9% fail on Steering linkage components
      • 0.97% fail on Drag link end
      • 0.97% fail on Track rod end
    • 0.97% fail on Steering gear
      • 0.97% fail on Steering box
    • 0.97% fail on Steering column
    • 0.97% fail on Steering play
      • 0.97% fail on Steering box
  • 5.8% fail on Noise, emissions and leaks
    • 5.8% fail on Exhaust emissions
      • 4.9% fail on Compression ignition
        • 3.9% fail on Pre 01/07/2008 Turbo
        • 0.97% fail on Emissions not tested
      • 1.9% fail on Spark ignition
        • 0.97% fail on Catalyst emissions
        • 0.97% fail on Emissions not tested
  • 4.9% fail on Tyres
    • 4.9% fail on Tread depth
  • 3.9% fail on Seat belts and supplementary restraint systems
    • 3.9% fail on Seat belts
      • 3.9% fail on Prescribed areas
  • 2.9% fail on Identification of the vehicle
    • 2.9% fail on Registration plates
  • 0.97% fail on Seat belt installation check
    • 0.97% fail on Anchorages