Volkswagen Caddy MOT Results
Registered in 200055.8% pass rate
from 344 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 vans and highlighted areas where the Volkswagen Caddy is unusually good or bad.
-
22% fail on
Suspension
- 11% fail on Component mounting prescribed areas
- 5.2% fail on Wheel bearings (2 times worse than other 2000 vans)
-
4.9% fail on
Springs
-
3.5% fail on
Coil springs
(2 times worse than other 2000 vans)
- 3.2% fail on Coil spring (2 times worse than other 2000 vans)
- 0.29% fail on Mounting
- 1.7% fail on Spring mounting prescribed areas
-
3.5% fail on
Coil springs
(2 times worse than other 2000 vans)
-
4.7% fail on
Suspension arms
- 2.0% fail on Ball joint
- 1.7% fail on Pins and bushes
- 0.58% fail on Suspension arm
- 0.58% fail on Ball joint dust cover
-
2.9% fail on
Anti-roll bars
- 1.5% fail on Linkage (3 times worse than other 2000 vans)
- 0.87% fail on Linkage pins and bushes
- 0.58% fail on Pins and bushes
-
1.7% fail on
Macpherson strut
(9 times worse than other 2000 vans)
- 1.2% fail on Pins and bushes (35 times worse than other 2000 vans)
- 0.58% fail on Attachment bracket and mounting (5 times worse than other 2000 vans)
- 0.87% fail on Shock absorbers
-
0.87% fail on
Sub-frames
- 0.87% fail on Sub-frame (4 times worse than other 2000 vans)
-
0.87% fail on
Other suspension component
- 0.58% fail on Attachment bracket and mounting (20 times worse than other 2000 vans)
- 0.29% fail on Ball joint
-
20% fail on
Brakes
-
14% fail on
Brake performance
-
7.8% fail on
Service Brake Efficiency (sp)
-
7.6% fail on
Rbt (sp)
- 6.1% fail on Service brake imbalance (93% worse than other 2000 vans)
- 2.6% fail on Service brake performance
- 0.29% fail on Decelerometer (sp)
-
7.6% fail on
Rbt (sp)
-
5.5% fail on
Service brake performance
-
5.5% fail on
Rbt
- 4.1% fail on Service brake performance
- 2.0% fail on Service brake imbalance
-
5.5% fail on
Rbt
-
4.9% fail on
Parking brake efficiency (sp)
- 4.7% fail on Rbt (sp)
- 0.29% fail on Decelerometer (sp)
-
2.6% fail on
Parking brake performance
-
2.6% fail on
Rbt
- 2.6% fail on Parking brake performance
-
2.6% fail on
Rbt
- 0.87% fail on Brake performance not tested
-
7.8% fail on
Service Brake Efficiency (sp)
- 5.2% fail on Rigid brake pipes
-
2.0% fail on
Mechanical brake components
-
1.5% fail on
Brake linings and pads
- 1.5% fail on Brake pads
-
0.87% fail on
Brake discs and drums
- 0.87% fail on Brake discs
-
1.5% fail on
Brake linings and pads
- 1.7% fail on Flexible brake hoses (2 times worse than other 2000 vans)
- 1.5% fail on Load sensing valves
-
0.87% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.87% fail on Hydraulic brake cylinder (5 times worse than other 2000 vans)
-
0.58% fail on
Service brake pedal or hand lever
- 0.58% fail on Pedal
-
0.58% fail on
Hydraulic systems
- 0.29% fail on Servos
- 0.29% fail on Brake fluid
-
0.58% fail on
Other components and prescribed areas
-
0.58% fail on
Prescribed areas
- 0.58% fail on Other braking system component
-
0.58% fail on
Prescribed areas
-
0.29% fail on
Air and vacuum systems
- 0.29% fail on Leaks
-
0.29% fail on
Parking brake control
- 0.29% fail on Lever
-
14% fail on
Brake performance
-
19% fail on
Lamps, reflectors and electrical equipment
-
5.5% fail on
Direction indicators
-
5.5% fail on
Flashing type
- 3.8% fail on Individual direction indicators
- 1.5% fail on Side repeaters
- 0.29% fail on All direction indicators
-
5.5% fail on
Flashing type
-
4.9% fail on
Headlamp aim
- 4.4% fail on Headlamp aim
- 0.58% fail on Headlamp aim not tested
-
4.7% fail on
Front and rear fog lamps
-
4.7% fail on
Rear fog lamp
- 4.7% fail on Rear fog lamp
-
4.7% fail on
Rear fog lamp
-
3.8% fail on
Headlamps
- 3.5% fail on Headlamp
- 0.29% fail on Headlamp levelling device
- 3.8% fail on Stop lamp
- 2.0% fail on Registration plate lamp(s)
-
2.0% fail on
Electrical equipment
- 1.2% fail on Battery(ies)
- 0.87% fail on Horn
- 0.29% fail on Trailer electrical socket
-
0.29% fail on
Position lamps
- 0.29% fail on Position lamp
-
0.29% fail on
Mandatory tell-tales
- 0.29% fail on Rear fog lamp tell-tale
-
5.5% fail on
Direction indicators
-
17% fail on
Body, chassis, structure
-
6.4% fail on
Transmission
-
5.8% fail on
Drive shafts
(87% worse than other 2000 vans)
- 5.2% fail on Joints
- 0.58% fail on Drive shaft (6 times worse than other 2000 vans)
-
0.58% fail on
Prop shafts
- 0.58% fail on Joints
-
5.8% fail on
Drive shafts
(87% worse than other 2000 vans)
- 3.8% fail on Exhaust system
-
3.2% fail on
Integral vehicle structure
- 3.2% fail on Integral vehicle structure condition
-
3.2% fail on
Chassis
- 3.2% fail on Chassis condition
-
1.7% fail on
Body
- 1.2% fail on Panel
- 0.58% fail on Other body component
-
0.87% fail on
Fuel system
- 0.58% fail on Pipe
- 0.29% fail on Fuel cap/sealing device
-
0.87% fail on
Seats
- 0.58% fail on Driver's seat
- 0.29% fail on Passenger's seat
- 0.58% fail on Bumpers
- 0.58% fail on Floor
- 0.58% fail on Undertray (20 times worse than other 2000 vans)
-
0.29% fail on
Spare wheel
- 0.29% fail on Carrier
-
0.29% fail on
Engine mounting
- 0.29% fail on Bracket
-
0.29% fail on
Doors
-
0.29% fail on
Front passenger's door
- 0.29% fail on Door condition
-
0.29% fail on
Front passenger's door
-
6.4% fail on
Transmission
-
6.7% fail on
Steering
-
3.8% fail on
Steering linkage components
- 3.5% fail on Track rod end
- 0.29% fail on Ball joint
-
2.0% fail on
Steering gear
- 2.0% fail on Steering rack
-
1.2% fail on
Power steering
- 0.58% fail on Other components
- 0.29% fail on Pipes and hoses
- 0.29% fail on Pump
- 0.29% fail on Prescribed areas
- 0.29% fail on Steering column
-
3.8% fail on
Steering linkage components
-
6.1% fail on
Visibility
(41% better than other 2000 vans)
- 3.8% fail on Wipers
- 2.6% fail on Washers
-
5.8% fail on
Seat belts and supplementary restraint systems
-
5.2% fail on
Seat belts
- 4.9% fail on Prescribed areas
- 0.29% fail on Condition
-
0.29% fail on
Airbags
- 0.29% fail on Drivers airbag
- 0.29% fail on SRS malfunction indicator lamp
-
5.2% fail on
Seat belts
-
4.7% fail on
Tyres
- 2.9% fail on Tread depth
- 2.3% fail on Condition
-
2.9% fail on
Noise, emissions and leaks
-
1.5% fail on
Exhaust emissions
-
1.5% fail on
Compression ignition
- 0.87% fail on Emissions not tested
- 0.58% fail on Pre 01/07/2008 Turbo
-
1.5% fail on
Compression ignition
-
1.2% fail on
Fluid leaks
- 0.87% fail on Engine oil leaks
- 0.29% fail on Other leaks
-
0.29% fail on
Noise suppression
- 0.29% fail on Undertray
-
1.5% fail on
Exhaust emissions
-
1.7% fail on
Identification of the vehicle
- 1.7% fail on Registration plates
-
0.58% fail on
Road Wheels
- 0.58% fail on Attachment