MOT Results

Honest John Vans MOT Results » Volkswagen » Camper » 1990

Volkswagen Camper MOT Results

Registered in 1990
57.7% pass rate
from 222 tests in 2020
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 vans and highlighted areas where the Volkswagen Camper is unusually good or bad.

  • 16% fail on Suspension
    • 8.6% fail on Component mounting prescribed areas
    • 4.1% fail on Suspension arms
      • 2.3% fail on Ball joint
      • 0.45% fail on Suspension arm
      • 0.45% fail on Attachment bracket and mounting
      • 0.45% fail on Pins and bushes
      • 0.45% fail on Ball joint dust cover
    • 3.6% fail on Wheel bearings
    • 1.4% fail on Springs
      • 1.4% fail on Coil springs
        • 1.4% fail on Coil spring
    • 0.90% fail on Other suspension component
      • 0.45% fail on Pins and bushes
      • 0.45% fail on Ball joint
    • 0.45% fail on Suspension rods
      • 0.45% fail on Pins and bushes
    • 0.45% fail on Anti-roll bars
      • 0.45% fail on Pins and bushes
  • 15% fail on Lamps, reflectors and electrical equipment
    • 5.4% fail on Headlamps
      • 5.4% fail on Headlamp
    • 4.1% fail on Headlamp aim
      • 3.6% fail on Headlamp aim
      • 0.90% fail on Headlamp aim not tested
    • 3.2% fail on Position lamps
      • 2.7% fail on Position lamp
      • 0.45% fail on All position lamps
    • 2.3% fail on Stop lamp
    • 1.8% fail on Mandatory tell-tales
      • 0.90% fail on Main beam tell-tale
      • 0.90% fail on Rear fog lamp tell-tale
    • 1.8% fail on Electrical equipment
      • 1.8% fail on Horn
    • 1.4% fail on Direction indicators
      • 1.4% fail on Flashing type
        • 0.90% fail on Individual direction indicators
        • 0.45% fail on All direction indicators
    • 0.90% fail on Front and rear fog lamps
      • 0.90% fail on Rear fog lamp
        • 0.90% fail on Switch
        • 0.45% fail on Rear fog lamp
    • 0.90% fail on Registration plate lamp(s)
  • 12% fail on Visibility
    • 5.9% fail on Wipers
    • 5.4% fail on Washers
    • 0.45% fail on Driver's view
    • 0.45% fail on View to rear
      • 0.45% fail on Mirrors
  • 12% fail on Body, chassis, structure
    • 4.5% fail on Exhaust system
    • 2.3% fail on Integral vehicle structure
      • 2.3% fail on Integral vehicle structure condition
    • 1.4% fail on Chassis
      • 1.4% fail on Chassis condition
    • 1.4% fail on Fuel system
      • 0.90% fail on Pipe
      • 0.45% fail on Hose
    • 1.4% fail on Transmission
      • 1.4% fail on Drive shafts
        • 1.4% fail on Joints
    • 1.4% fail on Body
      • 0.90% fail on Panel
      • 0.45% fail on Other body component
    • 1.4% fail on Seats
      • 0.90% fail on Driver's seat
      • 0.45% fail on Passenger's seat
    • 0.45% fail on Bumpers
    • 0.45% fail on Doors
      • 0.45% fail on Driver's door
        • 0.45% fail on Door condition
  • 9.9% fail on Brakes
    • 5.9% fail on Brake performance
      • 3.6% fail on Service brake performance
        • 3.2% fail on Rbt
          • 2.7% fail on Service brake performance
          • 0.90% fail on Service brake imbalance
        • 0.45% fail on Plate brake tester
          • 0.45% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 2.7% fail on Parking brake efficiency (sp)
        • 2.7% fail on Rbt (sp)
      • 1.4% fail on Service Brake Efficiency (sp)
        • 1.4% fail on Rbt (sp)
          • 0.90% fail on Service brake performance
          • 0.90% fail on Service brake imbalance
      • 1.4% fail on Parking brake performance
        • 1.4% fail on Rbt
          • 0.90% fail on Parking (secondary brake performance)
          • 0.45% fail on Parking brake performance
    • 3.2% fail on Rigid brake pipes
    • 2.7% fail on Mechanical brake components
      • 0.90% fail on Brake linings and pads
        • 0.90% fail on Brake pads
      • 0.90% fail on Brake discs and drums
        • 0.90% fail on Brake discs
      • 0.90% fail on Brake cables, rods, levers and linkages
        • 0.90% fail on Cable
    • 0.45% fail on Service brake pedal or hand lever
      • 0.45% fail on Pedal
    • 0.45% fail on Air and vacuum systems
      • 0.45% fail on Operation
    • 0.45% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.45% fail on Hydraulic brake cylinder
  • 7.7% fail on Tyres (200% worse than other 1990 vans)
    • 4.5% fail on Condition (2 times worse than other 1990 vans)
    • 3.2% fail on Tread depth
  • 6.3% fail on Steering
    • 2.7% fail on Steering gear
      • 2.7% fail on Steering rack
      • 0.45% fail on Operation
    • 2.3% fail on Steering linkage components
      • 2.3% fail on Track rod end
      • 0.45% fail on Locking devices
    • 1.4% fail on Power steering
      • 0.90% fail on Operation
      • 0.45% fail on Pipes and hoses
    • 0.45% fail on Steering wheel
    • 0.45% fail on Steering play
      • 0.45% fail on Steering rack
  • 5.9% fail on Noise, emissions and leaks
    • 5.4% fail on Exhaust emissions
      • 4.1% fail on Spark ignition
        • 3.6% fail on Non catalyst emissions
        • 0.45% fail on Emissions not tested
      • 1.4% fail on Compression ignition
        • 0.90% fail on Emissions not tested
        • 0.45% fail on Pre 01/07/2008 Non turbo
    • 0.45% fail on Fluid leaks
      • 0.45% fail on Engine oil leaks
  • 2.7% fail on Seat belts and supplementary restraint systems
    • 2.7% fail on Seat belts
      • 2.7% fail on Prescribed areas
  • 1.4% fail on Identification of the vehicle
    • 1.4% fail on Registration plates
  • 0.45% fail on Road Wheels
    • 0.45% fail on Attachment