Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

FIAT Ducato MOT Results

Registered in 1990
54.0% pass rate
from 548 tests in 2020
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 vans and highlighted areas where the FIAT Ducato is unusually good or bad.

  • 30% fail on Lamps, reflectors and electrical equipment (47% worse than other 1990 vans)
    • 11% fail on Headlamps (130% worse than other 1990 vans)
      • 11% fail on Headlamp (140% worse than other 1990 vans)
    • 8.6% fail on Direction indicators (110% worse than other 1990 vans)
      • 8.6% fail on Flashing type (110% worse than other 1990 vans)
        • 5.7% fail on Individual direction indicators (120% worse than other 1990 vans)
        • 2.9% fail on Side repeaters (100% worse than other 1990 vans)
        • 1.3% fail on All direction indicators (2 times worse than other 1990 vans)
    • 7.3% fail on Headlamp aim (62% worse than other 1990 vans)
      • 6.0% fail on Headlamp aim
      • 1.3% fail on Headlamp aim not tested (2 times worse than other 1990 vans)
    • 5.5% fail on Electrical equipment
      • 3.8% fail on Battery(ies) (110% worse than other 1990 vans)
      • 1.5% fail on Horn
      • 0.55% fail on Electrical wiring
    • 4.4% fail on Front and rear fog lamps
      • 4.4% fail on Rear fog lamp
        • 4.4% fail on Rear fog lamp
    • 4.2% fail on Registration plate lamp(s) (110% worse than other 1990 vans)
    • 3.1% fail on Position lamps
      • 2.6% fail on Position lamp
      • 0.55% fail on All position lamps
    • 3.1% fail on Stop lamp
    • 0.55% fail on Hazard warning
      • 0.55% fail on Switch
    • 0.18% fail on Outline marker lamps
      • 0.18% fail on Outline marker lamp
    • 0.18% fail on Reversing lamps
      • 0.18% fail on Reversing lamps
    • 0.18% fail on Rear reflectors
    • 0.18% fail on Mandatory tell-tales
      • 0.18% fail on Main beam tell-tale
  • 19% fail on Body, chassis, structure (39% worse than other 1990 vans)
    • 7.1% fail on Exhaust system
    • 6.9% fail on Transmission (190% worse than other 1990 vans)
      • 6.6% fail on Drive shafts (2 times worse than other 1990 vans)
        • 6.6% fail on Joints (2 times worse than other 1990 vans)
      • 0.36% fail on Prop shafts
        • 0.36% fail on Joints
    • 3.1% fail on Integral vehicle structure
      • 3.1% fail on Integral vehicle structure condition
    • 1.6% fail on Fuel system
      • 1.3% fail on Fuel cap/sealing device
      • 0.18% fail on Pipe
      • 0.18% fail on System
    • 1.5% fail on Chassis
      • 1.5% fail on Chassis condition
    • 1.1% fail on Body
      • 0.73% fail on Panel
      • 0.36% fail on Other body component
    • 1.1% fail on Seats
      • 0.91% fail on Driver's seat
      • 0.36% fail on Passenger's seat
    • 0.73% fail on Doors
      • 0.55% fail on Front passenger's door
        • 0.36% fail on Door condition
        • 0.18% fail on Catch
      • 0.18% fail on Driver's door
        • 0.18% fail on Door condition
    • 0.36% fail on Bumpers
    • 0.36% fail on Engine mounting
      • 0.36% fail on Engine mounting condition
    • 0.18% fail on Spare wheel
      • 0.18% fail on Spare wheel condition
    • 0.18% fail on Floor
  • 18% fail on Brakes
    • 12% fail on Brake performance
      • 5.8% fail on Service Brake Efficiency (sp)
        • 5.8% fail on Rbt (sp)
          • 3.5% fail on Service brake imbalance
          • 2.7% fail on Service brake performance
      • 5.7% fail on Service brake performance
        • 5.5% fail on Rbt
          • 5.1% fail on Service brake performance
          • 1.1% fail on Service brake imbalance
        • 0.18% fail on Plate brake tester
          • 0.18% fail on Service brake performance
      • 4.7% fail on Parking brake efficiency (sp)
        • 4.6% fail on Rbt (sp)
        • 0.18% fail on Decelerometer (sp)
      • 1.3% fail on Parking brake performance
        • 1.3% fail on Rbt
          • 1.1% fail on Parking brake performance
          • 0.18% fail on Parking (secondary brake performance)
      • 0.73% fail on Brake performance not tested
    • 5.7% fail on Rigid brake pipes (66% worse than other 1990 vans)
    • 1.5% fail on Mechanical brake components
      • 1.1% fail on Brake discs and drums
        • 1.1% fail on Brake discs
      • 0.18% fail on Brake linings and pads
        • 0.18% fail on Brake pads
      • 0.18% fail on Brake cables, rods, levers and linkages
        • 0.18% fail on Cable
    • 1.3% fail on Flexible brake hoses
    • 1.3% fail on Load sensing valves
    • 0.55% fail on Hydraulic systems
      • 0.18% fail on Reservoirs
      • 0.18% fail on Brake fluid
      • 0.18% fail on Valves
    • 0.36% fail on Service brake pedal or hand lever
      • 0.18% fail on Pedal
      • 0.18% fail on Hand lever
    • 0.36% fail on Other components and prescribed areas
      • 0.36% fail on Prescribed areas
        • 0.36% fail on Park brake mechanism/associated mountings
    • 0.18% fail on Air and vacuum systems
      • 0.18% fail on Pressure/vacuum build up
    • 0.18% fail on Parking brake control
      • 0.18% fail on Lever
    • 0.18% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.18% fail on Hydraulic brake cylinder
  • 12% fail on Visibility
    • 7.3% fail on Wipers
    • 5.5% fail on Washers
    • 1.1% fail on View to rear
      • 1.1% fail on Mirrors
    • 0.18% fail on Driver's view
    • 0.18% fail on Condition of glass
      • 0.18% fail on Windscreen
  • 11% fail on Suspension
    • 5.1% fail on Component mounting prescribed areas
    • 3.8% fail on Wheel bearings
    • 1.6% fail on Suspension arms
      • 1.1% fail on Ball joint dust cover
      • 0.55% fail on Ball joint
      • 0.18% fail on Suspension arm
    • 0.91% fail on Springs
      • 0.55% fail on Spring mounting prescribed areas
      • 0.36% fail on Leaf springs
        • 0.18% fail on Leaf spring
        • 0.18% fail on Anchor bracket
    • 0.55% fail on Other suspension component
      • 0.36% fail on Ball joint dust cover
      • 0.18% fail on Ball joint
    • 0.18% fail on Shock absorbers
    • 0.18% fail on Air/gas/fluid suspension
      • 0.18% fail on Suspension unit
  • 6.8% fail on Noise, emissions and leaks
    • 5.7% fail on Exhaust emissions
      • 3.6% fail on Spark ignition
        • 2.2% fail on Non catalyst emissions
        • 1.5% fail on Emissions not tested
        • 0.18% fail on Catalyst emissions
      • 2.0% fail on Compression ignition
        • 0.91% fail on Pre 01/07/2008 Non turbo
        • 0.55% fail on Pre 01/07/2008 Turbo
        • 0.55% fail on Emissions not tested
    • 1.3% fail on Fluid leaks
      • 1.1% fail on Engine oil leaks
      • 0.18% fail on Transmission oil leaks
  • 5.8% fail on Steering
    • 4.6% fail on Steering linkage components (75% worse than other 1990 vans)
      • 4.4% fail on Track rod end (130% worse than other 1990 vans)
      • 0.18% fail on Ball joint
    • 0.73% fail on Steering gear (72% better than other 1990 vans)
      • 0.55% fail on Steering rack (78% better than other 1990 vans)
      • 0.18% fail on Operation
    • 0.36% fail on Steering wheel
    • 0.18% fail on Power steering
      • 0.18% fail on Operation
    • 0.18% fail on Steering play
      • 0.18% fail on Steering rack
  • 2.2% fail on Seat belts and supplementary restraint systems
    • 2.2% fail on Seat belts
      • 1.8% fail on Prescribed areas
      • 0.18% fail on Requirements
      • 0.18% fail on Condition
  • 1.5% fail on Tyres
    • 1.3% fail on Condition
    • 0.18% fail on Tread depth
  • 0.36% fail on Identification of the vehicle
    • 0.36% fail on Registration plates
  • 0.18% fail on Seat belt installation check
    • 0.18% fail on Belt(s)/padding