MOT Results

Honest John Vans MOT Results » FIAT » Scudo » 2012
Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

FIAT Scudo MOT Results

Registered in 2012
57.1% pass rate
from 617 tests in 2020
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the FIAT Scudo is unusually good or bad.

  • 23% fail on Lamps, reflectors and electrical equipment
    • 6.6% fail on Stop lamp
    • 5.7% fail on Position lamps
      • 5.7% fail on Position lamp
    • 5.0% fail on Registration plate lamp(s)
    • 4.9% fail on Headlamp aim
      • 4.5% fail on Headlamp aim
      • 0.49% fail on Headlamp aim not tested
    • 3.9% fail on Headlamps
      • 3.7% fail on Headlamp
      • 0.16% fail on Dipswitch
    • 2.4% fail on Direction indicators
      • 2.4% fail on Flashing type
        • 1.8% fail on Individual direction indicators
        • 0.32% fail on All direction indicators
        • 0.32% fail on Side repeaters
    • 1.1% fail on Front and rear fog lamps
      • 1.1% fail on Rear fog lamp
        • 1.1% fail on Rear fog lamp
    • 0.81% fail on Electrical equipment
      • 0.49% fail on Horn
      • 0.32% fail on Electrical wiring
    • 0.32% fail on Hazard warning
      • 0.32% fail on Switch
    • 0.16% fail on Rear reflectors
  • 14% fail on Body, chassis, structure (180% worse than other 2012 vans)
    • 12% fail on Transmission (2 times worse than other 2012 vans)
      • 11% fail on Drive shafts (2 times worse than other 2012 vans)
        • 11% fail on Joints (2 times worse than other 2012 vans)
        • 0.16% fail on Flexible couplings
      • 0.49% fail on Prop shafts
        • 0.49% fail on Joints
    • 2.8% fail on Exhaust system (3 times worse than other 2012 vans)
    • 0.65% fail on Bumpers (3 times worse than other 2012 vans)
    • 0.16% fail on Fuel system
      • 0.16% fail on System
    • 0.16% fail on Doors
      • 0.16% fail on Front passenger's door
        • 0.16% fail on Door condition
    • 0.16% fail on Seats
      • 0.16% fail on Driver's seat
  • 9.7% fail on Suspension
    • 5.3% fail on Suspension arms (59% worse than other 2012 vans)
      • 5.3% fail on Ball joint (2 times worse than other 2012 vans)
      • 0.16% fail on Ball joint dust cover
    • 2.8% fail on Anti-roll bars
      • 0.97% fail on Linkage ball joints
      • 0.81% fail on Ball joint
      • 0.49% fail on Linkage ball joint dust cover
      • 0.32% fail on Linkage pins and bushes
      • 0.16% fail on Pins and bushes
    • 0.97% fail on Wheel bearings
    • 0.97% fail on Shock absorbers
    • 0.49% fail on Springs (82% better than other 2012 vans)
      • 0.49% fail on Coil springs (77% better than other 2012 vans)
        • 0.49% fail on Coil spring (77% better than other 2012 vans)
    • 0.32% fail on Other suspension component
      • 0.16% fail on Ball joint
      • 0.16% fail on Ball joint dust cover
  • 8.1% fail on Visibility
    • 4.7% fail on Washers
    • 3.1% fail on Wipers
    • 0.65% fail on View to rear
      • 0.49% fail on Mirrors
      • 0.16% fail on Indirect vision devices
    • 0.32% fail on Driver's view
    • 0.16% fail on Condition of glass
      • 0.16% fail on Windscreen
  • 7.8% fail on Brakes (30% better than other 2012 vans)
    • 4.5% fail on Mechanical brake components
      • 2.8% fail on Brake linings and pads
        • 2.8% fail on Brake pads
      • 1.5% fail on Brake discs and drums
        • 1.3% fail on Brake discs
        • 0.16% fail on Brake drums
      • 0.81% fail on Brake cables, rods, levers and linkages
        • 0.81% fail on Cable (3 times worse than other 2012 vans)
    • 2.9% fail on Brake performance
      • 0.97% fail on Service brake performance
        • 0.81% fail on Rbt
          • 0.49% fail on Service brake performance
          • 0.49% fail on Service brake imbalance
        • 0.16% fail on Plate brake tester
          • 0.16% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.97% fail on Parking brake efficiency (sp) (71% better than other 2012 vans)
        • 0.97% fail on Rbt (sp) (71% better than other 2012 vans)
      • 0.81% fail on Service Brake Efficiency (sp)
        • 0.81% fail on Rbt (sp)
          • 0.81% fail on Service brake performance
      • 0.81% fail on Parking brake performance
        • 0.81% fail on Rbt
          • 0.81% fail on Parking brake performance
    • 0.81% fail on Service brake pedal or hand lever
      • 0.81% fail on Pedal
    • 0.32% fail on Parking brake control
      • 0.32% fail on Lever
    • 0.32% fail on ABS / EBS / ESC
      • 0.32% fail on Anti-lock braking system
      • 0.16% fail on Electronic stability control
    • 0.16% fail on Rigid brake pipes
    • 0.16% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.16% fail on Hydraulic brake cylinder
  • 6.2% fail on Tyres
    • 4.4% fail on Tread depth
    • 1.8% fail on Condition
    • 0.32% fail on Size/type
  • 3.6% fail on Noise, emissions and leaks
    • 3.1% fail on Exhaust emissions
      • 2.3% fail on Compression ignition
        • 1.3% fail on On or after 01/07/2008
        • 0.81% fail on Malfunction indicator lamp
        • 0.32% fail on Emissions not tested
      • 0.81% fail on Spark ignition
        • 0.81% fail on Malfunction indicator lamp
    • 0.49% fail on Fluid leaks
      • 0.49% fail on Engine oil leaks
  • 0.97% fail on Steering (68% better than other 2012 vans)
    • 0.32% fail on Steering gear
      • 0.32% fail on Steering rack
    • 0.32% fail on Steering linkage components (87% better than other 2012 vans)
      • 0.32% fail on Track rod end (86% better than other 2012 vans)
    • 0.32% fail on Power steering
      • 0.16% fail on Operation
      • 0.16% fail on Rams
  • 0.65% fail on Identification of the vehicle
    • 0.65% fail on Registration plates
  • 0.65% fail on Seat belts and supplementary restraint systems
    • 0.65% fail on Seat belts
      • 0.65% fail on Condition
      • 0.16% fail on Requirements