Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

Hyundai iLoad MOT Results

Registered in 2013
65.9% pass rate
from 214 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 vans and highlighted areas where the Hyundai iLoad is unusually good or bad.

  • 15% fail on Lamps, reflectors and electrical equipment
    • 5.6% fail on Headlamp aim
      • 5.6% fail on Headlamp aim
    • 3.7% fail on Position lamps
      • 3.7% fail on Position lamp
    • 3.3% fail on Registration plate lamp(s)
    • 2.3% fail on Headlamps
      • 2.3% fail on Headlamp
    • 1.9% fail on Stop lamp
    • 1.4% fail on Rear reflectors (5 times worse than other 2013 vans)
    • 0.47% fail on Direction indicators
      • 0.47% fail on Flashing type
        • 0.47% fail on Side repeaters
    • 0.47% fail on Reversing lamps
      • 0.47% fail on Reversing lamps
  • 12% fail on Brakes
    • 7.5% fail on Brake performance (94% worse than other 2013 vans)
      • 4.7% fail on Parking brake efficiency (sp)
        • 4.7% fail on Rbt (sp)
      • 3.7% fail on Parking brake performance (3 times worse than other 2013 vans)
        • 3.7% fail on Rbt (3 times worse than other 2013 vans)
          • 2.8% fail on Parking brake performance (3 times worse than other 2013 vans)
          • 0.93% fail on Parking (secondary brake performance) (9 times worse than other 2013 vans)
      • 2.3% fail on Service brake performance
        • 2.3% fail on Rbt
          • 1.4% fail on Service brake performance
          • 0.93% fail on Service brake imbalance
      • 0.47% fail on Service Brake Efficiency (sp)
        • 0.47% fail on Rbt (sp)
          • 0.47% fail on Service brake performance
    • 4.7% fail on Mechanical brake components
      • 4.7% fail on Brake linings and pads
        • 4.7% fail on Brake pads
      • 1.4% fail on Brake discs and drums
        • 1.4% fail on Brake discs
    • 0.93% fail on Parking brake control
      • 0.93% fail on Lever
    • 0.47% fail on Rigid brake pipes
  • 7.5% fail on Suspension
    • 7.0% fail on Springs (2 times worse than other 2013 vans)
      • 7.0% fail on Leaf springs (15 times worse than other 2013 vans)
        • 7.0% fail on Leaf spring (28 times worse than other 2013 vans)
        • 0.47% fail on Shackle pins and bushes
    • 0.47% fail on Suspension arms
      • 0.47% fail on Pins and bushes
  • 6.5% fail on Tyres
    • 3.3% fail on Condition
    • 2.3% fail on Tread depth
    • 1.4% fail on Size/type (9 times worse than other 2013 vans)
  • 3.7% fail on Visibility
    • 1.9% fail on Wipers
    • 1.9% fail on Washers
  • 1.9% fail on Noise, emissions and leaks
    • 1.9% fail on Exhaust emissions
      • 1.4% fail on Compression ignition
        • 1.4% fail on Malfunction indicator lamp
      • 0.47% fail on Spark ignition
        • 0.47% fail on Malfunction indicator lamp
  • 0.47% fail on Body, chassis, structure
    • 0.47% fail on Fuel system
      • 0.47% fail on Fuel cap/sealing device
    • 0.47% fail on Body
      • 0.47% fail on Other body component
  • 0.47% fail on Speedometer and speed limiter
    • 0.47% fail on Speedometer
  • 0.47% fail on Seat belts and supplementary restraint systems
    • 0.47% fail on Seat belts
      • 0.47% fail on Condition