Isuzu Rodeo MOT Results
Registered in 201261.1% pass rate
from 306 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Isuzu Rodeo is unusually good or bad.
-
15% fail on
Lamps, reflectors and electrical equipment
-
5.6% fail on
Front and rear fog lamps
(2 times worse than other 2012 vans)
-
5.6% fail on
Rear fog lamp
(2 times worse than other 2012 vans)
- 5.6% fail on Rear fog lamp (2 times worse than other 2012 vans)
-
5.6% fail on
Rear fog lamp
(2 times worse than other 2012 vans)
- 4.2% fail on Stop lamp
-
2.9% fail on
Headlamps
- 2.9% fail on Headlamp
-
2.6% fail on
Direction indicators
-
2.6% fail on
Flashing type
- 1.3% fail on Individual direction indicators
- 1.3% fail on Side repeaters
-
2.6% fail on
Flashing type
- 2.3% fail on Registration plate lamp(s) (63% better than other 2012 vans)
-
0.98% fail on
Reversing lamps
- 0.65% fail on Reversing lamps
- 0.33% fail on Reversing lamp switch
-
0.65% fail on
Headlamp aim
(82% better than other 2012 vans)
- 0.65% fail on Headlamp aim (80% better than other 2012 vans)
-
0.33% fail on
Position lamps
- 0.33% fail on Position lamp
-
0.33% fail on
Electrical equipment
- 0.33% fail on Electrical wiring
-
5.6% fail on
Front and rear fog lamps
(2 times worse than other 2012 vans)
-
11% fail on
Brakes
-
3.9% fail on
Brake performance
-
2.6% fail on
Parking brake efficiency (sp)
- 2.6% fail on Rbt (sp)
-
1.6% fail on
Service brake performance
-
1.3% fail on
Rbt
- 1.3% fail on Service brake performance
- 0.33% fail on Service brake imbalance
-
0.33% fail on
Plate brake tester
- 0.33% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
1.3% fail on
Rbt
-
0.65% fail on
Service Brake Efficiency (sp)
-
0.65% fail on
Rbt (sp)
- 0.65% fail on Service brake performance
- 0.33% fail on Service brake imbalance
-
0.65% fail on
Rbt (sp)
-
0.65% fail on
Parking brake performance
-
0.65% fail on
Rbt
- 0.65% fail on Parking brake performance
-
0.65% fail on
Rbt
-
2.6% fail on
Parking brake efficiency (sp)
- 3.3% fail on Rigid brake pipes
-
2.6% fail on
Mechanical brake components
-
2.0% fail on
Brake linings and pads
- 2.0% fail on Brake pads
-
0.65% fail on
Brake discs and drums
- 0.65% fail on Brake discs
-
2.0% fail on
Brake linings and pads
-
2.3% fail on
ABS / EBS / ESC
- 1.6% fail on Anti-lock braking system
- 0.33% fail on Electronic braking system
- 0.33% fail on Electronic stability control
- 0.65% fail on Flexible brake hoses
-
0.33% fail on
Parking brake control
- 0.33% fail on Lever
-
3.9% fail on
Brake performance
-
9.5% fail on
Suspension
-
3.6% fail on
Springs
-
3.6% fail on
Leaf springs
(3 times worse than other 2012 vans)
- 1.6% fail on Leaf spring
- 1.3% fail on Shackle pins and bushes (15 times worse than other 2012 vans)
- 0.33% fail on Fixings and fixing bolts
- 0.33% fail on Shackle bracket
-
3.6% fail on
Leaf springs
(3 times worse than other 2012 vans)
-
3.6% fail on
Anti-roll bars
- 3.3% fail on Pins and bushes (2 times worse than other 2012 vans)
- 0.33% fail on Linkage ball joint dust cover
-
2.0% fail on
Suspension arms
- 1.6% fail on Ball joint dust cover (3 times worse than other 2012 vans)
- 0.98% fail on Ball joint
- 1.6% fail on Wheel bearings
-
0.33% fail on
Other suspension component
- 0.33% fail on Ball joint
-
3.6% fail on
Springs
-
7.8% fail on
Visibility
- 5.2% fail on Wipers
- 2.6% fail on Washers
-
0.33% fail on
View to rear
- 0.33% fail on Mirrors
-
6.2% fail on
Body, chassis, structure
- 3.6% fail on Exhaust system (2 times worse than other 2012 vans)
-
2.9% fail on
Transmission
-
1.6% fail on
Drive shafts
- 1.6% fail on Joints
-
1.3% fail on
Prop shafts
(2 times worse than other 2012 vans)
- 1.3% fail on Joints (4 times worse than other 2012 vans)
-
1.6% fail on
Drive shafts
-
0.33% fail on
Body
- 0.33% fail on Other body component
-
3.3% fail on
Noise, emissions and leaks
-
3.3% fail on
Exhaust emissions
-
3.3% fail on
Compression ignition
- 1.3% fail on Malfunction indicator lamp
- 0.98% fail on On or after 01/07/2008
- 0.98% fail on Emissions not tested
-
3.3% fail on
Compression ignition
-
3.3% fail on
Exhaust emissions
-
2.9% fail on
Tyres
- 2.3% fail on Tread depth
- 0.33% fail on Size/type
- 0.33% fail on Condition
-
0.65% fail on
Identification of the vehicle
- 0.65% fail on Registration plates
-
0.65% fail on
Steering
(83% better than other 2012 vans)
-
0.65% fail on
Steering linkage components
(80% better than other 2012 vans)
- 0.65% fail on Ball joint
-
0.65% fail on
Steering linkage components
(80% better than other 2012 vans)
-
0.65% fail on
Seat belts and supplementary restraint systems
-
0.33% fail on
Seat belts
- 0.33% fail on Prescribed areas
- 0.33% fail on SRS malfunction indicator lamp
-
0.33% fail on
Seat belts