MOT Results

Honest John Vans MOT Results » Peugeot » Bipper » 2013

Peugeot Bipper MOT Results

Registered in 2013
62.7% pass rate
from 2,965 tests in 2020
(6.9% worse than other 2013 vans)
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 vans and highlighted areas where the Peugeot Bipper is unusually good or bad.

  • 14% fail on Suspension (91% worse than other 2013 vans)
    • 8.6% fail on Springs (3 times worse than other 2013 vans)
      • 8.6% fail on Coil springs (4 times worse than other 2013 vans)
        • 8.6% fail on Coil spring (4 times worse than other 2013 vans)
        • 0.034% fail on Mounting
      • 0.034% fail on Spring mounting prescribed areas
    • 1.7% fail on Anti-roll bars
      • 0.71% fail on Linkage ball joints
      • 0.44% fail on Linkage ball joint dust cover
      • 0.17% fail on Ball joint
      • 0.17% fail on Ball joint dust cover
      • 0.10% fail on Linkage
      • 0.067% fail on Linkage pins and bushes (87% better than other 2013 vans)
      • 0.034% fail on Anti-roll bar
      • 0.034% fail on Attachment bracket and mounting
    • 1.5% fail on Macpherson strut (4 times worse than other 2013 vans)
      • 0.94% fail on Attachment bracket and mounting (5 times worse than other 2013 vans)
      • 0.47% fail on Pins and bushes (3 times worse than other 2013 vans)
      • 0.10% fail on Macpherson strut
    • 1.4% fail on Shock absorbers (130% worse than other 2013 vans)
    • 0.84% fail on Suspension arms (62% better than other 2013 vans)
      • 0.51% fail on Ball joint
      • 0.20% fail on Ball joint dust cover
      • 0.13% fail on Pins and bushes (88% better than other 2013 vans)
    • 0.37% fail on Wheel bearings
    • 0.30% fail on Other suspension component
      • 0.13% fail on Ball joint
      • 0.067% fail on Other suspension component
      • 0.067% fail on Pins and bushes
      • 0.034% fail on Attachment bracket and mounting
    • 0.10% fail on Suspension rods
      • 0.034% fail on Suspension rod
      • 0.034% fail on Ball joint
      • 0.034% fail on Ball joint dust cover
    • 0.034% fail on Air/gas/fluid suspension
      • 0.034% fail on Suspension unit
  • 14% fail on Lamps, reflectors and electrical equipment (26% better than other 2013 vans)
    • 3.9% fail on Registration plate lamp(s) (31% better than other 2013 vans)
    • 2.8% fail on Headlamp aim
      • 2.7% fail on Headlamp aim
      • 0.067% fail on Headlamp aim not tested
    • 2.6% fail on Stop lamp (49% better than other 2013 vans)
    • 2.1% fail on Position lamps (40% better than other 2013 vans)
      • 2.0% fail on Position lamp (40% better than other 2013 vans)
      • 0.067% fail on All position lamps
    • 1.8% fail on Direction indicators
      • 1.8% fail on Flashing type
        • 1.5% fail on Individual direction indicators
        • 0.27% fail on Side repeaters (66% better than other 2013 vans)
        • 0.10% fail on All direction indicators
    • 1.6% fail on Headlamps (44% better than other 2013 vans)
      • 1.6% fail on Headlamp (43% better than other 2013 vans)
      • 0.034% fail on Headlamp levelling device
    • 1.1% fail on Front and rear fog lamps
      • 1.1% fail on Rear fog lamp
        • 1.1% fail on Rear fog lamp
    • 0.88% fail on Reversing lamps (140% worse than other 2013 vans)
      • 0.88% fail on Reversing lamps (150% worse than other 2013 vans)
    • 0.51% fail on Electrical equipment
      • 0.27% fail on Horn
      • 0.13% fail on Electrical wiring
      • 0.10% fail on Battery(ies)
  • 8.6% fail on Tyres (74% worse than other 2013 vans)
    • 4.9% fail on Tread depth (61% worse than other 2013 vans)
    • 4.0% fail on Condition (95% worse than other 2013 vans)
    • 0.30% fail on Size/type
  • 7.2% fail on Brakes (21% better than other 2013 vans)
    • 2.9% fail on Service brake pedal or hand lever (4 times worse than other 2013 vans)
      • 2.5% fail on Pedal (4 times worse than other 2013 vans)
      • 0.40% fail on Hand lever (3 times worse than other 2013 vans)
    • 2.7% fail on Mechanical brake components (35% better than other 2013 vans)
      • 2.0% fail on Brake linings and pads (39% better than other 2013 vans)
        • 2.0% fail on Brake pads (39% better than other 2013 vans)
        • 0.034% fail on Brake linings
      • 1.0% fail on Brake discs and drums
        • 1.0% fail on Brake discs
    • 1.6% fail on Brake performance (60% better than other 2013 vans)
      • 0.88% fail on Service brake performance
        • 0.84% fail on Rbt
          • 0.54% fail on Service brake performance
          • 0.40% fail on Service brake imbalance
        • 0.034% fail on Plate brake tester
          • 0.034% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.54% fail on Parking brake efficiency (sp) (78% better than other 2013 vans)
        • 0.54% fail on Rbt (sp) (77% better than other 2013 vans)
      • 0.17% fail on Service Brake Efficiency (sp) (65% better than other 2013 vans)
        • 0.17% fail on Rbt (sp)
          • 0.10% fail on Service brake imbalance
          • 0.067% fail on Service brake performance
      • 0.10% fail on Parking brake performance (87% better than other 2013 vans)
        • 0.067% fail on Rbt (91% better than other 2013 vans)
          • 0.034% fail on Parking brake performance
          • 0.034% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
        • 0.034% fail on Decelerometer
          • 0.034% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.034% fail on Brake performance not tested
    • 0.54% fail on Parking brake control
      • 0.54% fail on Lever
    • 0.20% fail on ABS / EBS / ESC (63% better than other 2013 vans)
      • 0.20% fail on Anti-lock braking system
    • 0.17% fail on Flexible brake hoses
    • 0.067% fail on Other components and prescribed areas
      • 0.034% fail on Other components
      • 0.034% fail on Additional braking device
    • 0.034% fail on Hydraulic systems
      • 0.034% fail on Brake fluid
    • 0.034% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.034% fail on Hydraulic brake callipers
  • 6.9% fail on Visibility
    • 3.3% fail on Washers
    • 2.9% fail on Wipers
    • 0.54% fail on Condition of glass
      • 0.54% fail on Windscreen
    • 0.54% fail on View to rear
      • 0.54% fail on Mirrors
    • 0.17% fail on Bonnet
    • 0.067% fail on Driver's view
  • 2.7% fail on Noise, emissions and leaks
    • 2.5% fail on Exhaust emissions
      • 2.0% fail on Compression ignition
        • 0.94% fail on Malfunction indicator lamp
        • 0.84% fail on On or after 01/07/2008
        • 0.30% fail on Emissions not tested
        • 0.10% fail on Pre 01/07/2008 Turbo
        • 0.034% fail on Emission control equipment
          • 0.034% fail on NOx sensor
        • 0.034% fail on Pre 01/07/2008 Non turbo
      • 0.47% fail on Spark ignition
        • 0.44% fail on Malfunction indicator lamp
        • 0.034% fail on Non catalyst emissions
        • 0.034% fail on Catalyst emissions
    • 0.40% fail on Fluid leaks
      • 0.30% fail on Engine oil leaks (150% worse than other 2013 vans)
      • 0.067% fail on Hydraulic fluid leaks (7 times worse than other 2013 vans)
      • 0.034% fail on Other leaks
  • 2.5% fail on Steering
    • 1.1% fail on Steering linkage components
      • 0.94% fail on Track rod end (39% better than other 2013 vans)
      • 0.10% fail on Steering arm (5 times worse than other 2013 vans)
      • 0.067% fail on Drag link end
      • 0.034% fail on Other components
        • 0.034% fail on Steering component
    • 0.81% fail on Power steering (3 times worse than other 2013 vans)
      • 0.51% fail on Pipes and hoses (4 times worse than other 2013 vans)
      • 0.17% fail on Other components (2 times worse than other 2013 vans)
      • 0.13% fail on Operation
    • 0.64% fail on Steering gear (3 times worse than other 2013 vans)
      • 0.37% fail on Steering rack (2 times worse than other 2013 vans)
      • 0.27% fail on Operation (9 times worse than other 2013 vans)
  • 2.1% fail on Body, chassis, structure (41% better than other 2013 vans)
    • 0.54% fail on Transmission (73% better than other 2013 vans)
      • 0.51% fail on Drive shafts (73% better than other 2013 vans)
        • 0.47% fail on Joints (74% better than other 2013 vans)
        • 0.067% fail on Drive shaft
      • 0.034% fail on Prop shafts
        • 0.034% fail on Joints
    • 0.51% fail on Exhaust system
    • 0.44% fail on Fuel system
      • 0.17% fail on System
      • 0.13% fail on Pipe
      • 0.10% fail on Fuel cap/sealing device
      • 0.067% fail on Tank
    • 0.20% fail on Doors
      • 0.10% fail on Driver's door
        • 0.10% fail on Door condition
      • 0.067% fail on Other passenger's door
        • 0.034% fail on Door condition
        • 0.034% fail on Catch
      • 0.034% fail on Front passenger's door
        • 0.034% fail on Door condition
    • 0.17% fail on Seats
      • 0.13% fail on Driver's seat
      • 0.034% fail on Passenger's seat
    • 0.13% fail on Engine mounting
      • 0.13% fail on Engine mounting condition
    • 0.067% fail on Spare wheel
      • 0.034% fail on Spare wheel condition
      • 0.034% fail on Carrier
    • 0.067% fail on Body (80% better than other 2013 vans)
      • 0.067% fail on Other body component
    • 0.034% fail on Bumpers
    • 0.034% fail on Floor
    • 0.034% fail on Passenger compartment
  • 1.6% fail on Seat belts and supplementary restraint systems
    • 1.2% fail on SRS malfunction indicator lamp (150% worse than other 2013 vans)
    • 0.30% fail on Seat belts
      • 0.27% fail on Condition
      • 0.034% fail on Pre-tensioners
    • 0.034% fail on Airbags
      • 0.034% fail on Drivers airbag
  • 0.30% fail on Identification of the vehicle
    • 0.30% fail on Registration plates
  • 0.27% fail on Road Wheels
    • 0.17% fail on Attachment
    • 0.10% fail on Condition
  • 0.034% fail on Seat belt installation check
    • 0.034% fail on Anchorages