Peugeot Boxer MOT Results

Registered in 2012
73.4% pass rate
from 3,847 tests in 2020
(32% better than other 2012 vans)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Peugeot Boxer is unusually good or bad.

  • 15% fail on Lamps, reflectors and electrical equipment (28% better than other 2012 vans)
    • 5.5% fail on Headlamp aim (44% worse than other 2012 vans)
      • 5.3% fail on Headlamp aim (49% worse than other 2012 vans)
      • 0.18% fail on Headlamp aim not tested
    • 3.6% fail on Registration plate lamp(s) (44% better than other 2012 vans)
    • 2.8% fail on Direction indicators
      • 2.8% fail on Flashing type
        • 1.6% fail on Side repeaters (100% worse than other 2012 vans)
        • 1.4% fail on Individual direction indicators
    • 2.4% fail on Headlamps (24% better than other 2012 vans)
      • 2.2% fail on Headlamp (29% better than other 2012 vans)
      • 0.26% fail on Headlamp levelling device
    • 1.5% fail on Stop lamp (74% better than other 2012 vans)
    • 1.4% fail on Position lamps (65% better than other 2012 vans)
      • 1.2% fail on Position lamp (67% better than other 2012 vans)
      • 0.078% fail on All position lamps
      • 0.026% fail on Switch
    • 0.99% fail on Front and rear fog lamps (34% better than other 2012 vans)
      • 0.99% fail on Rear fog lamp (34% better than other 2012 vans)
        • 0.96% fail on Rear fog lamp (35% better than other 2012 vans)
        • 0.052% fail on Switch
    • 0.96% fail on Outline marker lamps (97% worse than other 2012 vans)
      • 0.78% fail on Outline marker lamp (78% worse than other 2012 vans)
      • 0.18% fail on All outline marker lamps (2 times worse than other 2012 vans)
    • 0.52% fail on Electrical equipment
      • 0.21% fail on Horn (63% better than other 2012 vans)
      • 0.16% fail on Trailer electrical socket
      • 0.16% fail on Electrical wiring
    • 0.44% fail on Reversing lamps
      • 0.44% fail on Reversing lamps
    • 0.16% fail on Rear reflectors
    • 0.078% fail on Hazard warning
      • 0.078% fail on Switch
  • 7.4% fail on Brakes (34% better than other 2012 vans)
    • 5.1% fail on Brake performance
      • 3.7% fail on Parking brake efficiency (sp)
        • 3.7% fail on Rbt (sp)
        • 0.026% fail on Decelerometer (sp)
      • 1.5% fail on Parking brake performance
        • 1.5% fail on Rbt
          • 1.2% fail on Parking brake performance
          • 0.13% fail on Parking (secondary brake performance)
          • 0.10% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles) (3 times worse than other 2012 vans)
      • 1.4% fail on Service brake performance
        • 1.3% fail on Rbt
          • 1.2% fail on Service brake performance
          • 0.21% fail on Service brake imbalance
        • 0.026% fail on Plate brake tester
          • 0.026% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.42% fail on Service Brake Efficiency (sp)
        • 0.42% fail on Rbt (sp)
          • 0.36% fail on Service brake performance
          • 0.10% fail on Service brake imbalance
      • 0.052% fail on Brake performance not tested
    • 1.6% fail on Mechanical brake components (63% better than other 2012 vans)
      • 1.4% fail on Brake linings and pads (60% better than other 2012 vans)
        • 1.4% fail on Brake pads (61% better than other 2012 vans)
        • 0.026% fail on Brake linings
      • 0.29% fail on Brake cables, rods, levers and linkages
        • 0.16% fail on Cable
        • 0.052% fail on Linkage
        • 0.052% fail on Relay lever (6 times worse than other 2012 vans)
        • 0.026% fail on Pivot
      • 0.16% fail on Brake discs and drums (87% better than other 2012 vans)
        • 0.16% fail on Brake discs (87% better than other 2012 vans)
    • 0.47% fail on ABS / EBS / ESC
      • 0.44% fail on Anti-lock braking system
      • 0.026% fail on Electronic stability control
    • 0.44% fail on Parking brake control
      • 0.44% fail on Lever
    • 0.23% fail on Flexible brake hoses
    • 0.13% fail on Service brake pedal or hand lever (78% better than other 2012 vans)
      • 0.13% fail on Pedal (73% better than other 2012 vans)
    • 0.10% fail on Rigid brake pipes (95% better than other 2012 vans)
    • 0.026% fail on Hydraulic systems
      • 0.026% fail on Brake fluid
    • 0.026% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.026% fail on Hydraulic brake callipers
  • 4.7% fail on Visibility (31% better than other 2012 vans)
    • 2.4% fail on Wipers
    • 1.8% fail on Washers (40% better than other 2012 vans)
    • 0.49% fail on View to rear
      • 0.49% fail on Mirrors
    • 0.44% fail on Condition of glass
      • 0.44% fail on Windscreen
      • 0.026% fail on Window
    • 0.10% fail on Driver's view
  • 4.7% fail on Suspension (55% better than other 2012 vans)
    • 2.2% fail on Suspension arms (35% better than other 2012 vans)
      • 1.3% fail on Pins and bushes
      • 0.73% fail on Ball joint (55% better than other 2012 vans)
      • 0.21% fail on Ball joint dust cover
      • 0.026% fail on Suspension arm
    • 1.3% fail on Shock absorbers (65% worse than other 2012 vans)
    • 1.0% fail on Springs (63% better than other 2012 vans)
      • 0.62% fail on Coil springs (70% better than other 2012 vans)
        • 0.62% fail on Coil spring (70% better than other 2012 vans)
      • 0.39% fail on Leaf springs
        • 0.18% fail on Shackle pins and bushes
        • 0.13% fail on Leaf spring (66% better than other 2012 vans)
        • 0.078% fail on Anchor pins and bushes
      • 0.026% fail on Spring mounting prescribed areas
    • 0.29% fail on Other suspension component
      • 0.26% fail on Ball joint
      • 0.026% fail on Pins and bushes
    • 0.26% fail on Anti-roll bars (93% better than other 2012 vans)
      • 0.078% fail on Linkage pins and bushes (86% better than other 2012 vans)
      • 0.052% fail on Anti-roll bar
      • 0.052% fail on Linkage ball joints (96% better than other 2012 vans)
      • 0.026% fail on Attachment bracket and mounting
      • 0.026% fail on Pins and bushes
      • 0.026% fail on Linkage attachment bracket and mounting
    • 0.13% fail on Suspension rods (2 times worse than other 2012 vans)
      • 0.078% fail on Ball joint (4 times worse than other 2012 vans)
      • 0.052% fail on Suspension rod (9 times worse than other 2012 vans)
    • 0.10% fail on Wheel bearings (90% better than other 2012 vans)
    • 0.10% fail on Air/gas/fluid suspension (10 times worse than other 2012 vans)
      • 0.052% fail on Suspension unit (12 times worse than other 2012 vans)
      • 0.052% fail on Bellows (14 times worse than other 2012 vans)
    • 0.052% fail on Component mounting prescribed areas
    • 0.026% fail on Axles
      • 0.026% fail on Axle
    • 0.026% fail on Sub-frames
      • 0.026% fail on Ball joint
  • 2.6% fail on Noise, emissions and leaks (32% better than other 2012 vans)
    • 2.4% fail on Exhaust emissions (34% better than other 2012 vans)
      • 1.9% fail on Compression ignition (32% better than other 2012 vans)
        • 1.2% fail on Malfunction indicator lamp
        • 0.47% fail on On or after 01/07/2008 (51% better than other 2012 vans)
        • 0.26% fail on Emissions not tested
        • 0.078% fail on Emission control equipment
          • 0.078% fail on Particulate filter
        • 0.026% fail on On or after 01/01/2014
      • 0.52% fail on Spark ignition
        • 0.52% fail on Malfunction indicator lamp
    • 0.29% fail on Fluid leaks
      • 0.21% fail on Engine oil leaks
      • 0.078% fail on Other leaks
  • 2.1% fail on Body, chassis, structure (59% better than other 2012 vans)
    • 0.52% fail on Transmission (84% better than other 2012 vans)
      • 0.52% fail on Drive shafts (82% better than other 2012 vans)
        • 0.52% fail on Joints (82% better than other 2012 vans)
    • 0.47% fail on Body
      • 0.42% fail on Other body component
      • 0.052% fail on Panel
    • 0.36% fail on Fuel system
      • 0.16% fail on System
      • 0.13% fail on Fuel cap/sealing device
      • 0.026% fail on Tank
      • 0.026% fail on Hose
      • 0.026% fail on Pipe
    • 0.29% fail on Exhaust system (56% better than other 2012 vans)
    • 0.18% fail on Doors
      • 0.16% fail on Other passenger's door
        • 0.10% fail on Door condition
        • 0.052% fail on Hinge (8 times worse than other 2012 vans)
      • 0.026% fail on Driver's door
        • 0.026% fail on Door condition
    • 0.13% fail on Seats
      • 0.078% fail on Driver's seat
      • 0.052% fail on Passenger's seat
    • 0.078% fail on Bumpers
    • 0.052% fail on Load security
      • 0.052% fail on Loading door
    • 0.026% fail on Integral vehicle structure
      • 0.026% fail on Integral vehicle structure condition
    • 0.026% fail on Chassis
      • 0.026% fail on Chassis condition
    • 0.026% fail on Engine mounting
      • 0.026% fail on Engine mounting condition
    • 0.026% fail on Floor
  • 2.0% fail on Seat belts and supplementary restraint systems (47% worse than other 2012 vans)
    • 1.1% fail on SRS malfunction indicator lamp (64% worse than other 2012 vans)
    • 0.91% fail on Seat belts
      • 0.62% fail on Condition
      • 0.23% fail on Attachment (5 times worse than other 2012 vans)
      • 0.026% fail on Requirements
      • 0.026% fail on Pre-tensioners
    • 0.026% fail on Airbags
      • 0.026% fail on Drivers airbag
  • 2.0% fail on Tyres (63% better than other 2012 vans)
    • 1.1% fail on Tread depth (68% better than other 2012 vans)
    • 0.88% fail on Condition (59% better than other 2012 vans)
    • 0.10% fail on Size/type
  • 0.88% fail on Steering (71% better than other 2012 vans)
    • 0.47% fail on Steering linkage components (81% better than other 2012 vans)
      • 0.39% fail on Track rod end (83% better than other 2012 vans)
      • 0.052% fail on Ball joint
      • 0.026% fail on Other components
        • 0.026% fail on Steering linkage
    • 0.26% fail on Power steering
      • 0.13% fail on Other components
      • 0.10% fail on Pipes and hoses
      • 0.026% fail on Pump
    • 0.10% fail on Steering gear
      • 0.078% fail on Steering rack
      • 0.026% fail on Operation
    • 0.052% fail on Steering play
      • 0.052% fail on Steering rack
  • 0.23% fail on Identification of the vehicle (61% better than other 2012 vans)
    • 0.23% fail on Registration plates (60% better than other 2012 vans)
  • 0.16% fail on Buses and coaches supplementary tests (7 times worse than other 2012 vans)
    • 0.078% fail on Doors (5 times worse than other 2012 vans)
      • 0.052% fail on Emergency exits (5 times worse than other 2012 vans)
      • 0.026% fail on Passenger entrance/exit doors
    • 0.078% fail on Steps and stairs (22 times worse than other 2012 vans)
      • 0.052% fail on Steps (35 times worse than other 2012 vans)
      • 0.026% fail on Retractable steps
  • 0.078% fail on Road Wheels
    • 0.078% fail on Attachment
  • 0.026% fail on Speedometer and speed limiter
    • 0.026% fail on Speed limiter
      • 0.026% fail on Speed limiter plate
  • 0.026% fail on Seat belt installation check
    • 0.026% fail on Anchorages