MOT Results

Honest John Vans MOT Results » Renault » Master » 2012
Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

Renault Master MOT Results

Registered in 2012
57.0% pass rate
from 4,028 tests in 2020
(10% worse than other 2012 vans)
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Renault Master is unusually good or bad.

  • 24% fail on Lamps, reflectors and electrical equipment (16% worse than other 2012 vans)
    • 6.5% fail on Headlamps (100% worse than other 2012 vans)
      • 6.3% fail on Headlamp (110% worse than other 2012 vans)
      • 0.099% fail on Headlamp levelling device
      • 0.025% fail on Matched pair
      • 0.025% fail on Dipswitch
    • 5.5% fail on Direction indicators (110% worse than other 2012 vans)
      • 5.5% fail on Flashing type (110% worse than other 2012 vans)
        • 2.9% fail on Side repeaters (2 times worse than other 2012 vans)
        • 2.7% fail on Individual direction indicators (46% worse than other 2012 vans)
        • 0.30% fail on All direction indicators
    • 5.2% fail on Position lamps (34% worse than other 2012 vans)
      • 5.0% fail on Position lamp (33% worse than other 2012 vans)
      • 0.20% fail on All position lamps
    • 4.5% fail on Registration plate lamp(s) (31% better than other 2012 vans)
    • 4.4% fail on Stop lamp (24% better than other 2012 vans)
    • 4.2% fail on Headlamp aim
      • 3.7% fail on Headlamp aim
      • 0.67% fail on Headlamp aim not tested (140% worse than other 2012 vans)
    • 3.0% fail on Outline marker lamps (5 times worse than other 2012 vans)
      • 2.6% fail on Outline marker lamp (4 times worse than other 2012 vans)
      • 0.47% fail on All outline marker lamps (7 times worse than other 2012 vans)
    • 1.4% fail on Front and rear fog lamps
      • 1.4% fail on Rear fog lamp
        • 1.4% fail on Rear fog lamp
    • 0.79% fail on Electrical equipment
      • 0.42% fail on Horn
      • 0.35% fail on Electrical wiring (2 times worse than other 2012 vans)
      • 0.025% fail on Trailer electrical socket
    • 0.32% fail on Rear reflectors
    • 0.15% fail on Reversing lamps (70% better than other 2012 vans)
      • 0.15% fail on Reversing lamps (69% better than other 2012 vans)
    • 0.025% fail on Daytime running lamps
    • 0.025% fail on Hazard warning
      • 0.025% fail on Switch
  • 15% fail on Brakes (31% worse than other 2012 vans)
    • 8.6% fail on Brake performance (72% worse than other 2012 vans)
      • 5.9% fail on Parking brake efficiency (sp) (75% worse than other 2012 vans)
        • 5.8% fail on Rbt (sp) (76% worse than other 2012 vans)
        • 0.050% fail on Plate brake tester (sp)
      • 3.1% fail on Service brake performance (100% worse than other 2012 vans)
        • 3.1% fail on Rbt (110% worse than other 2012 vans)
          • 2.3% fail on Service brake performance (97% worse than other 2012 vans)
          • 1.0% fail on Service brake imbalance (150% worse than other 2012 vans)
        • 0.074% fail on Plate brake tester
          • 0.074% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 1.3% fail on Parking brake performance
        • 1.3% fail on Rbt
          • 1.1% fail on Parking brake performance
          • 0.17% fail on Parking (secondary brake performance)
        • 0.074% fail on Plate brake tester
          • 0.050% fail on Parking (secondary brake performance)
          • 0.025% fail on Parking brake performance
      • 0.87% fail on Service Brake Efficiency (sp)
        • 0.79% fail on Rbt (sp)
          • 0.45% fail on Service brake performance
          • 0.42% fail on Service brake imbalance
        • 0.050% fail on Plate brake tester (sp)
          • 0.050% fail on Service brake imbalance (6 times worse than other 2012 vans)
          • 0.025% fail on Service brake performance
        • 0.025% fail on Decelerometer (sp)
      • 0.22% fail on Brake performance not tested
    • 5.3% fail on Mechanical brake components (20% worse than other 2012 vans)
      • 4.5% fail on Brake linings and pads (29% worse than other 2012 vans)
        • 4.5% fail on Brake pads (30% worse than other 2012 vans)
        • 0.025% fail on Brake linings
      • 1.4% fail on Brake discs and drums
        • 1.4% fail on Brake discs
      • 0.47% fail on Brake cables, rods, levers and linkages
        • 0.35% fail on Cable
        • 0.12% fail on Lever
        • 0.025% fail on Linkage
    • 1.6% fail on Brake actuators (including spring brakes or hydraulic cylinders) (8 times worse than other 2012 vans)
      • 1.5% fail on Hydraulic brake callipers (10 times worse than other 2012 vans)
      • 0.050% fail on Hydraulic brake cylinder
    • 1.4% fail on Rigid brake pipes (34% better than other 2012 vans)
    • 0.47% fail on ABS / EBS / ESC
      • 0.42% fail on Anti-lock braking system
      • 0.12% fail on Electronic stability control
    • 0.45% fail on Flexible brake hoses (95% worse than other 2012 vans)
    • 0.30% fail on Service brake pedal or hand lever
      • 0.30% fail on Pedal
    • 0.27% fail on Parking brake control
      • 0.27% fail on Lever
    • 0.25% fail on Hydraulic systems (140% worse than other 2012 vans)
      • 0.099% fail on Valves (25 times worse than other 2012 vans)
      • 0.074% fail on Brake fluid
      • 0.050% fail on Master cylinder (8 times worse than other 2012 vans)
      • 0.025% fail on Reservoirs
    • 0.074% fail on Air and vacuum systems (10 times worse than other 2012 vans)
      • 0.050% fail on Leaks (25 times worse than other 2012 vans)
      • 0.025% fail on Servos
  • 12% fail on Body, chassis, structure (140% worse than other 2012 vans)
    • 10.0% fail on Transmission (2 times worse than other 2012 vans)
      • 9.4% fail on Drive shafts (2 times worse than other 2012 vans)
        • 9.2% fail on Joints (2 times worse than other 2012 vans)
        • 0.099% fail on Drive shaft
        • 0.074% fail on Flexible couplings (5 times worse than other 2012 vans)
        • 0.025% fail on Bearing housing
      • 0.62% fail on Prop shafts (130% worse than other 2012 vans)
        • 0.52% fail on Joints (180% worse than other 2012 vans)
        • 0.050% fail on Prop shaft
        • 0.050% fail on Flexible couplings
      • 0.025% fail on Belts
    • 1.2% fail on Body (2 times worse than other 2012 vans)
      • 1.0% fail on Other body component (2 times worse than other 2012 vans)
      • 0.20% fail on Panel (200% worse than other 2012 vans)
    • 0.82% fail on Doors (2 times worse than other 2012 vans)
      • 0.45% fail on Driver's door (5 times worse than other 2012 vans)
        • 0.40% fail on Door condition (6 times worse than other 2012 vans)
        • 0.050% fail on Catch (12 times worse than other 2012 vans)
      • 0.25% fail on Other passenger's door (2 times worse than other 2012 vans)
        • 0.25% fail on Door condition (2 times worse than other 2012 vans)
      • 0.12% fail on Front passenger's door
        • 0.12% fail on Door condition
    • 0.32% fail on Exhaust system (50% better than other 2012 vans)
    • 0.27% fail on Bumpers
    • 0.22% fail on Spare wheel (2 times worse than other 2012 vans)
      • 0.15% fail on Spare wheel condition (5 times worse than other 2012 vans)
      • 0.074% fail on Carrier
    • 0.20% fail on Fuel system
      • 0.074% fail on Pipe
      • 0.050% fail on Tank
      • 0.050% fail on Fuel cap/sealing device
      • 0.025% fail on System
    • 0.15% fail on Seats
      • 0.099% fail on Driver's seat
      • 0.050% fail on Passenger's seat
    • 0.15% fail on Undertray (2 times worse than other 2012 vans)
    • 0.074% fail on Load security
      • 0.074% fail on Loading door
    • 0.050% fail on Engine mounting
      • 0.025% fail on Engine mounting condition
      • 0.025% fail on Bracket
    • 0.025% fail on Chassis
      • 0.025% fail on Chassis condition
    • 0.025% fail on Towbar
      • 0.025% fail on Safety device
    • 0.025% fail on Boot lid
      • 0.025% fail on Other boot lid component
  • 9.0% fail on Visibility (32% worse than other 2012 vans)
    • 3.8% fail on Wipers (25% worse than other 2012 vans)
    • 3.4% fail on Washers
    • 1.2% fail on View to rear (93% worse than other 2012 vans)
      • 1.2% fail on Mirrors (96% worse than other 2012 vans)
    • 0.84% fail on Condition of glass (77% worse than other 2012 vans)
      • 0.84% fail on Windscreen (80% worse than other 2012 vans)
    • 0.52% fail on Bonnet (3 times worse than other 2012 vans)
    • 0.099% fail on Driver's view
  • 8.9% fail on Suspension (16% better than other 2012 vans)
    • 3.3% fail on Shock absorbers (3 times worse than other 2012 vans)
    • 2.5% fail on Suspension arms (25% better than other 2012 vans)
      • 2.0% fail on Ball joint
      • 0.50% fail on Ball joint dust cover (130% worse than other 2012 vans)
      • 0.050% fail on Pins and bushes (97% better than other 2012 vans)
      • 0.025% fail on Attachment bracket and mounting
    • 1.5% fail on Wheel bearings
    • 1.4% fail on Anti-roll bars (62% better than other 2012 vans)
      • 0.50% fail on Linkage ball joints (64% better than other 2012 vans)
      • 0.40% fail on Pins and bushes
      • 0.17% fail on Linkage ball joint dust cover (65% better than other 2012 vans)
      • 0.15% fail on Linkage pins and bushes (73% better than other 2012 vans)
      • 0.15% fail on Ball joint (64% better than other 2012 vans)
      • 0.074% fail on Ball joint dust cover
      • 0.025% fail on Anti-roll bar
      • 0.025% fail on Attachment bracket and mounting
    • 0.82% fail on Other suspension component (150% worse than other 2012 vans)
      • 0.72% fail on Ball joint (2 times worse than other 2012 vans)
      • 0.12% fail on Ball joint dust cover
      • 0.025% fail on Other suspension component
    • 0.37% fail on Springs (86% better than other 2012 vans)
      • 0.32% fail on Leaf springs
        • 0.12% fail on Fixings and fixing bolts
        • 0.074% fail on Anchor pins and bushes
        • 0.050% fail on Leaf spring (87% better than other 2012 vans)
        • 0.050% fail on Anchor bracket
        • 0.025% fail on Shackle bracket
        • 0.025% fail on Shackle pins and bushes
      • 0.025% fail on Coil springs
        • 0.025% fail on Coil spring
      • 0.025% fail on Spring mounting prescribed areas
    • 0.099% fail on Air/gas/fluid suspension (9 times worse than other 2012 vans)
      • 0.050% fail on Bellows (13 times worse than other 2012 vans)
      • 0.025% fail on Operation
      • 0.025% fail on Suspension unit
    • 0.074% fail on Macpherson strut
      • 0.074% fail on Pins and bushes
    • 0.050% fail on Component mounting prescribed areas
    • 0.025% fail on Suspension rods
      • 0.025% fail on Pins and bushes
  • 4.1% fail on Tyres (23% better than other 2012 vans)
    • 2.2% fail on Condition
    • 2.0% fail on Tread depth (42% better than other 2012 vans)
    • 0.20% fail on Size/type
  • 2.6% fail on Noise, emissions and leaks (33% better than other 2012 vans)
    • 2.3% fail on Exhaust emissions (37% better than other 2012 vans)
      • 1.7% fail on Compression ignition (38% better than other 2012 vans)
        • 1.5% fail on Malfunction indicator lamp
        • 0.12% fail on Emissions not tested
        • 0.074% fail on Emission control equipment
          • 0.050% fail on Other emission control equipment (5 times worse than other 2012 vans)
          • 0.025% fail on Particulate filter
        • 0.074% fail on On or after 01/07/2008 (92% better than other 2012 vans)
        • 0.050% fail on Pre 01/07/2008 Turbo
        • 0.025% fail on On or after 01/01/2014
      • 0.57% fail on Spark ignition
        • 0.57% fail on Malfunction indicator lamp
    • 0.42% fail on Fluid leaks
      • 0.27% fail on Engine oil leaks
      • 0.074% fail on Other leaks
      • 0.050% fail on Hydraulic fluid leaks
      • 0.025% fail on Transmission oil leaks
  • 1.1% fail on Seat belts and supplementary restraint systems
    • 0.60% fail on SRS malfunction indicator lamp
    • 0.42% fail on Seat belts
      • 0.40% fail on Condition
      • 0.025% fail on Requirements
    • 0.074% fail on Airbags
      • 0.074% fail on Drivers airbag
  • 1.1% fail on Steering (65% better than other 2012 vans)
    • 0.35% fail on Power steering
      • 0.25% fail on Operation (190% worse than other 2012 vans)
      • 0.050% fail on Pipes and hoses
      • 0.050% fail on Other components
    • 0.32% fail on Steering linkage components (87% better than other 2012 vans)
      • 0.12% fail on Ball joint
      • 0.074% fail on Track rod end (97% better than other 2012 vans)
      • 0.050% fail on Other components
        • 0.025% fail on Steering component
        • 0.025% fail on Steering linkage
      • 0.050% fail on Locking devices
      • 0.025% fail on Steering arm
    • 0.27% fail on Steering gear
      • 0.20% fail on Steering rack
      • 0.074% fail on Operation
    • 0.12% fail on Steering coupling (13 times worse than other 2012 vans)
      • 0.12% fail on Universal joint (14 times worse than other 2012 vans)
    • 0.025% fail on Steering shaft
  • 0.57% fail on Identification of the vehicle
    • 0.57% fail on Registration plates
  • 0.12% fail on Road Wheels
    • 0.074% fail on Attachment
    • 0.050% fail on Condition
  • 0.050% fail on Buses and coaches supplementary tests
    • 0.025% fail on Doors
      • 0.025% fail on Emergency exits
    • 0.025% fail on Steps and stairs
      • 0.025% fail on Retractable steps
  • 0.025% fail on Speedometer and speed limiter
    • 0.025% fail on Speedometer
  • 0.025% fail on Seat belt installation check
    • 0.025% fail on Belt(s)/padding