MOT Results

Honest John Vans MOT Results » Toyota » Dyna » 2003

Toyota Dyna MOT Results

Registered in 2003
58.5% pass rate
from 94 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2003 vans and highlighted areas where the Toyota Dyna is unusually good or bad.

  • 19% fail on Lamps, reflectors and electrical equipment
    • 11% fail on Front and rear fog lamps (2 times worse than other 2003 vans)
      • 11% fail on Rear fog lamp (2 times worse than other 2003 vans)
        • 11% fail on Rear fog lamp (2 times worse than other 2003 vans)
    • 4.3% fail on Stop lamp
    • 4.3% fail on Registration plate lamp(s)
    • 3.2% fail on Headlamp aim
      • 3.2% fail on Headlamp aim
    • 1.1% fail on Mandatory tell-tales
      • 1.1% fail on Rear fog lamp tell-tale
  • 15% fail on Brakes
    • 9.6% fail on Brake performance
      • 6.4% fail on Service Brake Efficiency (sp)
        • 6.4% fail on Rbt (sp)
          • 4.3% fail on Service brake performance
          • 3.2% fail on Service brake imbalance
      • 5.3% fail on Parking brake efficiency (sp)
        • 5.3% fail on Rbt (sp)
      • 3.2% fail on Service brake performance
        • 3.2% fail on Rbt
          • 2.1% fail on Service brake performance
          • 1.1% fail on Service brake imbalance
      • 1.1% fail on Parking brake performance
        • 1.1% fail on Rbt
          • 1.1% fail on Parking brake performance
    • 4.3% fail on Mechanical brake components
      • 3.2% fail on Brake linings and pads
        • 3.2% fail on Brake pads
      • 1.1% fail on Brake discs and drums
        • 1.1% fail on Brake discs
    • 2.1% fail on Rigid brake pipes
    • 2.1% fail on ABS / EBS / ESC
      • 2.1% fail on Anti-lock braking system
    • 1.1% fail on Load sensing valves
  • 15% fail on Body, chassis, structure
    • 8.5% fail on Exhaust system (160% worse than other 2003 vans)
    • 3.2% fail on Chassis
      • 3.2% fail on Chassis condition
    • 2.1% fail on Fuel system
      • 1.1% fail on Tank
      • 1.1% fail on Fuel cap/sealing device
    • 1.1% fail on Towbar
      • 1.1% fail on Other towbar components
    • 1.1% fail on Body
      • 1.1% fail on Mounting fixings
    • 1.1% fail on Load security
      • 1.1% fail on Dropside
        • 1.1% fail on Dropside condition
    • 1.1% fail on Cabs
      • 1.1% fail on Prescribed areas
  • 14% fail on Suspension
    • 9.6% fail on Anti-roll bars
      • 5.3% fail on Linkage pins and bushes (4 times worse than other 2003 vans)
      • 4.3% fail on Pins and bushes (2 times worse than other 2003 vans)
      • 1.1% fail on Anti-roll bar
    • 2.1% fail on Wheel bearings
    • 1.1% fail on Axles
      • 1.1% fail on Axle
    • 1.1% fail on Springs
      • 1.1% fail on Leaf springs
        • 1.1% fail on Leaf spring
    • 1.1% fail on Suspension arms
      • 1.1% fail on Ball joint
    • 1.1% fail on Other suspension component
      • 1.1% fail on Ball joint
    • 1.1% fail on Component mounting prescribed areas
  • 12% fail on Visibility
    • 6.4% fail on Wipers
    • 6.4% fail on Washers
    • 2.1% fail on View to rear
      • 2.1% fail on Mirrors
    • 1.1% fail on Condition of glass
      • 1.1% fail on Windscreen
  • 11% fail on Seat belts and supplementary restraint systems
    • 11% fail on Seat belts (2 times worse than other 2003 vans)
      • 11% fail on Prescribed areas (3 times worse than other 2003 vans)
  • 5.3% fail on Noise, emissions and leaks
    • 5.3% fail on Exhaust emissions
      • 5.3% fail on Compression ignition
        • 2.1% fail on Pre 01/07/2008 Turbo
        • 1.1% fail on Pre 01/07/2008 Non turbo
        • 1.1% fail on Malfunction indicator lamp
        • 1.1% fail on Emissions not tested
  • 5.3% fail on Tyres
    • 4.3% fail on Tread depth
    • 1.1% fail on Condition
  • 3.2% fail on Identification of the vehicle
    • 3.2% fail on Registration plates
  • 1.1% fail on Steering
    • 1.1% fail on Steering linkage components
      • 1.1% fail on Track rod end