MOT Results

Honest John Vans MOT Results » Toyota » Dyna » 2013

Toyota Dyna MOT Results

Registered in 2013
69.2% pass rate
from 117 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 vans and highlighted areas where the Toyota Dyna is unusually good or bad.

  • 17% fail on Lamps, reflectors and electrical equipment
    • 7.7% fail on Front and rear fog lamps (3 times worse than other 2013 vans)
      • 7.7% fail on Rear fog lamp (3 times worse than other 2013 vans)
        • 7.7% fail on Rear fog lamp (3 times worse than other 2013 vans)
    • 5.1% fail on Stop lamp
    • 3.4% fail on Direction indicators
      • 3.4% fail on Flashing type
        • 3.4% fail on Individual direction indicators
    • 2.6% fail on Headlamp aim
      • 2.6% fail on Headlamp aim
    • 2.6% fail on Position lamps (5 times worse than other 2013 vans)
      • 2.6% fail on Position lamp (6 times worse than other 2013 vans)
    • 2.6% fail on Registration plate lamp(s)
    • 1.7% fail on Reversing lamps
      • 1.7% fail on Reversing lamps
    • 0.85% fail on Headlamps
      • 0.85% fail on Headlamp
    • 0.85% fail on Electrical equipment
      • 0.85% fail on Battery(ies)
  • 13% fail on Brakes
    • 9.4% fail on Brake performance
      • 6.0% fail on Parking brake efficiency (sp)
        • 6.0% fail on Rbt (sp)
      • 2.6% fail on Service Brake Efficiency (sp)
        • 2.6% fail on Rbt (sp)
          • 1.7% fail on Service brake performance
          • 0.85% fail on Service brake imbalance
      • 1.7% fail on Service brake performance
        • 1.7% fail on Rbt
          • 0.85% fail on Service brake performance
          • 0.85% fail on Service brake imbalance
    • 3.4% fail on Mechanical brake components
      • 3.4% fail on Brake linings and pads
        • 3.4% fail on Brake pads
      • 0.85% fail on Brake discs and drums
        • 0.85% fail on Brake discs
    • 1.7% fail on Parking brake control
      • 1.7% fail on Lever
    • 0.85% fail on Service brake pedal or hand lever
      • 0.85% fail on Hand lever
    • 0.85% fail on Hydraulic systems
      • 0.85% fail on Brake fluid
    • 0.85% fail on Load sensing valves
    • 0.85% fail on ABS / EBS / ESC
      • 0.85% fail on Anti-lock braking system
  • 8.5% fail on Suspension
    • 6.0% fail on Anti-roll bars
      • 4.3% fail on Pins and bushes (5 times worse than other 2013 vans)
      • 2.6% fail on Linkage pins and bushes (3 times worse than other 2013 vans)
      • 0.85% fail on Linkage
    • 1.7% fail on Wheel bearings
    • 1.7% fail on Springs
      • 1.7% fail on Leaf springs
        • 1.7% fail on Leaf spring
  • 7.7% fail on Visibility
    • 5.1% fail on Wipers
    • 2.6% fail on Washers
  • 6.8% fail on Tyres
    • 4.3% fail on Tread depth
    • 2.6% fail on Condition
  • 3.4% fail on Body, chassis, structure
    • 2.6% fail on Fuel system (6 times worse than other 2013 vans)
      • 1.7% fail on Fuel cap/sealing device (6 times worse than other 2013 vans)
      • 0.85% fail on Tank
    • 0.85% fail on Transmission
      • 0.85% fail on Prop shafts
        • 0.85% fail on Joints
  • 1.7% fail on Steering
    • 1.7% fail on Steering linkage components
      • 1.7% fail on Track rod end
  • 0.85% fail on Identification of the vehicle
    • 0.85% fail on Registration plates
  • 0.85% fail on Noise, emissions and leaks
    • 0.85% fail on Exhaust emissions
      • 0.85% fail on Compression ignition
        • 0.85% fail on Malfunction indicator lamp