Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

Vauxhall Movano MOT Results

Registered in 2012
56.0% pass rate
from 2,433 tests in 2020
(12% worse than other 2012 vans)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 vans and highlighted areas where the Vauxhall Movano is unusually good or bad.

  • 25% fail on Lamps, reflectors and electrical equipment (21% worse than other 2012 vans)
    • 6.2% fail on Direction indicators (130% worse than other 2012 vans)
      • 6.2% fail on Flashing type (130% worse than other 2012 vans)
        • 3.4% fail on Individual direction indicators (84% worse than other 2012 vans)
        • 3.2% fail on Side repeaters (3 times worse than other 2012 vans)
        • 0.37% fail on All direction indicators (160% worse than other 2012 vans)
      • 0.041% fail on Semaphore
        • 0.041% fail on Arm
    • 5.9% fail on Headlamps (85% worse than other 2012 vans)
      • 5.8% fail on Headlamp (90% worse than other 2012 vans)
      • 0.082% fail on Headlamp levelling device
    • 5.6% fail on Registration plate lamp(s)
    • 4.9% fail on Position lamps (26% worse than other 2012 vans)
      • 4.8% fail on Position lamp (27% worse than other 2012 vans)
      • 0.12% fail on All position lamps
    • 4.5% fail on Headlamp aim
      • 3.8% fail on Headlamp aim
      • 0.86% fail on Headlamp aim not tested (2 times worse than other 2012 vans)
    • 4.3% fail on Stop lamp (26% better than other 2012 vans)
    • 2.8% fail on Front and rear fog lamps (83% worse than other 2012 vans)
      • 2.8% fail on Rear fog lamp (84% worse than other 2012 vans)
        • 2.7% fail on Rear fog lamp (80% worse than other 2012 vans)
        • 0.12% fail on Switch (4 times worse than other 2012 vans)
    • 2.6% fail on Outline marker lamps (4 times worse than other 2012 vans)
      • 2.2% fail on Outline marker lamp (3 times worse than other 2012 vans)
      • 0.45% fail on All outline marker lamps (7 times worse than other 2012 vans)
    • 0.74% fail on Electrical equipment
      • 0.53% fail on Electrical wiring (4 times worse than other 2012 vans)
      • 0.16% fail on Horn (71% better than other 2012 vans)
      • 0.041% fail on Battery(ies)
    • 0.58% fail on Rear reflectors (150% worse than other 2012 vans)
    • 0.29% fail on Reversing lamps
      • 0.29% fail on Reversing lamps
    • 0.041% fail on Hazard warning
      • 0.041% fail on Switch
  • 16% fail on Brakes (43% worse than other 2012 vans)
    • 8.9% fail on Brake performance (78% worse than other 2012 vans)
      • 6.4% fail on Parking brake efficiency (sp) (91% worse than other 2012 vans)
        • 6.4% fail on Rbt (sp) (94% worse than other 2012 vans)
      • 3.4% fail on Service brake performance (130% worse than other 2012 vans)
        • 3.4% fail on Rbt (130% worse than other 2012 vans)
          • 2.6% fail on Service brake performance (130% worse than other 2012 vans)
          • 1.1% fail on Service brake imbalance (170% worse than other 2012 vans)
        • 0.041% fail on Plate brake tester
          • 0.041% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 1.5% fail on Parking brake performance
        • 1.4% fail on Rbt
          • 1.3% fail on Parking brake performance
          • 0.16% fail on Parking (secondary brake performance)
        • 0.041% fail on Decelerometer
          • 0.041% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
        • 0.041% fail on Plate brake tester
          • 0.041% fail on Parking (secondary brake performance)
      • 0.66% fail on Service Brake Efficiency (sp)
        • 0.66% fail on Rbt (sp)
          • 0.41% fail on Service brake performance
          • 0.33% fail on Service brake imbalance
      • 0.16% fail on Brake performance not tested
    • 5.5% fail on Mechanical brake components
      • 4.6% fail on Brake linings and pads (34% worse than other 2012 vans)
        • 4.6% fail on Brake pads (33% worse than other 2012 vans)
        • 0.082% fail on Brake linings
      • 1.5% fail on Brake discs and drums
        • 1.5% fail on Brake discs
        • 0.041% fail on Brake drums
      • 0.49% fail on Brake cables, rods, levers and linkages
        • 0.25% fail on Cable
        • 0.21% fail on Lever (2 times worse than other 2012 vans)
        • 0.041% fail on Relay lever
        • 0.041% fail on Pivot
    • 1.8% fail on Rigid brake pipes
    • 1.5% fail on Brake actuators (including spring brakes or hydraulic cylinders) (8 times worse than other 2012 vans)
      • 1.3% fail on Hydraulic brake callipers (8 times worse than other 2012 vans)
      • 0.21% fail on Hydraulic brake cylinder (6 times worse than other 2012 vans)
    • 0.70% fail on Service brake pedal or hand lever
      • 0.70% fail on Pedal
      • 0.041% fail on Hand lever
    • 0.66% fail on Flexible brake hoses (190% worse than other 2012 vans)
    • 0.49% fail on ABS / EBS / ESC
      • 0.49% fail on Anti-lock braking system
    • 0.16% fail on Parking brake control
      • 0.16% fail on Lever
    • 0.12% fail on Hydraulic systems
      • 0.041% fail on Servos
      • 0.041% fail on Master cylinder
      • 0.041% fail on Brake fluid
    • 0.082% fail on Air and vacuum systems (11 times worse than other 2012 vans)
      • 0.041% fail on Pressure/vacuum build up
      • 0.041% fail on Leaks
  • 14% fail on Body, chassis, structure (180% worse than other 2012 vans)
    • 12% fail on Transmission (2 times worse than other 2012 vans)
      • 11% fail on Drive shafts (2 times worse than other 2012 vans)
        • 11% fail on Joints (2 times worse than other 2012 vans)
        • 0.082% fail on Flexible couplings (6 times worse than other 2012 vans)
        • 0.041% fail on Drive shaft
      • 0.62% fail on Prop shafts (130% worse than other 2012 vans)
        • 0.53% fail on Joints (180% worse than other 2012 vans)
        • 0.082% fail on Flexible couplings (4 times worse than other 2012 vans)
    • 1.1% fail on Body (2 times worse than other 2012 vans)
      • 0.90% fail on Other body component (2 times worse than other 2012 vans)
      • 0.12% fail on Panel
      • 0.041% fail on Body condition
    • 0.99% fail on Doors (3 times worse than other 2012 vans)
      • 0.45% fail on Driver's door (5 times worse than other 2012 vans)
        • 0.37% fail on Door condition (5 times worse than other 2012 vans)
        • 0.082% fail on Catch (20 times worse than other 2012 vans)
      • 0.41% fail on Other passenger's door (4 times worse than other 2012 vans)
        • 0.33% fail on Door condition (3 times worse than other 2012 vans)
        • 0.041% fail on Catch
        • 0.041% fail on Hinge
      • 0.21% fail on Front passenger's door
        • 0.21% fail on Door condition
    • 0.33% fail on Exhaust system
    • 0.33% fail on Seats
      • 0.29% fail on Driver's seat
      • 0.041% fail on Passenger's seat
    • 0.29% fail on Spare wheel (3 times worse than other 2012 vans)
      • 0.21% fail on Carrier (3 times worse than other 2012 vans)
      • 0.082% fail on Spare wheel condition
    • 0.16% fail on Load security (3 times worse than other 2012 vans)
      • 0.082% fail on Loading door
      • 0.082% fail on Access panel (33 times worse than other 2012 vans)
    • 0.12% fail on Fuel system
      • 0.12% fail on Tank
    • 0.082% fail on Bumpers
    • 0.082% fail on Undertray
    • 0.041% fail on Chassis
      • 0.041% fail on Chassis condition
    • 0.041% fail on Towbar
      • 0.041% fail on Other towbar components
  • 8.3% fail on Suspension (21% better than other 2012 vans)
    • 3.0% fail on Shock absorbers (2 times worse than other 2012 vans)
    • 2.2% fail on Suspension arms (34% better than other 2012 vans)
      • 1.9% fail on Ball joint
      • 0.21% fail on Ball joint dust cover
      • 0.12% fail on Pins and bushes (92% better than other 2012 vans)
    • 1.3% fail on Wheel bearings
    • 1.3% fail on Anti-roll bars (66% better than other 2012 vans)
      • 0.62% fail on Pins and bushes
      • 0.49% fail on Linkage ball joints (65% better than other 2012 vans)
      • 0.16% fail on Ball joint dust cover
      • 0.12% fail on Linkage pins and bushes (77% better than other 2012 vans)
      • 0.041% fail on Ball joint
      • 0.041% fail on Linkage ball joint dust cover
    • 0.66% fail on Springs (76% better than other 2012 vans)
      • 0.62% fail on Leaf springs
        • 0.29% fail on Fixings and fixing bolts (180% worse than other 2012 vans)
        • 0.21% fail on Leaf spring
        • 0.041% fail on Anchor bracket
        • 0.041% fail on Anchor pins and bushes
        • 0.041% fail on Shackle bracket
      • 0.041% fail on Coil springs
        • 0.041% fail on Coil spring
      • 0.041% fail on Spring mounting prescribed areas
    • 0.66% fail on Other suspension component (99% worse than other 2012 vans)
      • 0.53% fail on Ball joint (130% worse than other 2012 vans)
      • 0.082% fail on Ball joint dust cover
      • 0.041% fail on Other suspension component
    • 0.082% fail on Macpherson strut
      • 0.041% fail on Macpherson strut
      • 0.041% fail on Ball joint
    • 0.041% fail on Axles
      • 0.041% fail on Axle
    • 0.041% fail on Suspension rods
      • 0.041% fail on Ball joint
  • 8.1% fail on Visibility
    • 3.3% fail on Washers
    • 3.0% fail on Wipers
    • 1.1% fail on Condition of glass (130% worse than other 2012 vans)
      • 1.1% fail on Windscreen (130% worse than other 2012 vans)
      • 0.041% fail on Window
    • 0.74% fail on Bonnet (5 times worse than other 2012 vans)
    • 0.70% fail on View to rear
      • 0.70% fail on Mirrors
    • 0.12% fail on Driver's view
  • 5.3% fail on Tyres
    • 3.1% fail on Condition (42% worse than other 2012 vans)
    • 2.3% fail on Tread depth (32% better than other 2012 vans)
    • 0.21% fail on Size/type
  • 3.7% fail on Noise, emissions and leaks
    • 3.5% fail on Exhaust emissions
      • 2.1% fail on Compression ignition
        • 2.0% fail on Malfunction indicator lamp
        • 0.12% fail on Emissions not tested
        • 0.041% fail on Emission control equipment
          • 0.041% fail on Particulate filter
        • 0.041% fail on On or after 01/07/2008
      • 1.4% fail on Spark ignition (65% worse than other 2012 vans)
        • 1.4% fail on Malfunction indicator lamp (74% worse than other 2012 vans)
    • 0.21% fail on Fluid leaks
      • 0.082% fail on Engine oil leaks
      • 0.041% fail on Transmission oil leaks
      • 0.041% fail on Hydraulic fluid leaks
      • 0.041% fail on Other leaks
    • 0.082% fail on Noise suppression
      • 0.082% fail on Undertray
  • 1.6% fail on Seat belts and supplementary restraint systems
    • 0.86% fail on SRS malfunction indicator lamp
    • 0.78% fail on Seat belts
      • 0.74% fail on Condition
      • 0.041% fail on Requirements
  • 1.2% fail on Steering (61% better than other 2012 vans)
    • 0.45% fail on Power steering
      • 0.25% fail on Other components (2 times worse than other 2012 vans)
      • 0.16% fail on Operation
      • 0.082% fail on Pipes and hoses
    • 0.41% fail on Steering gear (150% worse than other 2012 vans)
      • 0.41% fail on Steering rack (190% worse than other 2012 vans)
    • 0.21% fail on Steering linkage components (92% better than other 2012 vans)
      • 0.12% fail on Track rod end (95% better than other 2012 vans)
      • 0.082% fail on Locking devices (5 times worse than other 2012 vans)
      • 0.041% fail on Ball joint
    • 0.082% fail on Steering coupling (8 times worse than other 2012 vans)
      • 0.082% fail on Universal joint (9 times worse than other 2012 vans)
    • 0.041% fail on Steering play
      • 0.041% fail on Steering rack
  • 0.45% fail on Identification of the vehicle
    • 0.45% fail on Registration plates
  • 0.041% fail on Buses and coaches supplementary tests
    • 0.041% fail on Doors
      • 0.041% fail on Passenger entrance/exit doors
  • 0.041% fail on Road Wheels
    • 0.041% fail on Attachment