Do you have a minute to answer an electric vehicle survey? Start the survey | No thanks

Volkswagen Camper MOT Results

Registered in 1985
54.1% pass rate
from 74 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1985 vans and highlighted areas where the Volkswagen Camper is unusually good or bad.

  • 22% fail on Lamps, reflectors and electrical equipment
    • 6.8% fail on Headlamps
      • 6.8% fail on Headlamp
    • 4.1% fail on Headlamp aim
      • 4.1% fail on Headlamp aim
    • 4.1% fail on Front and rear fog lamps
      • 4.1% fail on Rear fog lamp
        • 4.1% fail on Rear fog lamp
    • 4.1% fail on Electrical equipment
      • 4.1% fail on Horn
    • 1.4% fail on Position lamps
      • 1.4% fail on Position lamp
    • 1.4% fail on Stop lamp
    • 1.4% fail on Direction indicators
      • 1.4% fail on Flashing type
        • 1.4% fail on Individual direction indicators
    • 1.4% fail on Registration plate lamp(s)
  • 20% fail on Brakes
    • 15% fail on Brake performance
      • 9.5% fail on Parking brake efficiency (sp)
        • 8.1% fail on Rbt (sp)
        • 1.4% fail on Plate brake tester (sp)
      • 5.4% fail on Service brake performance
        • 5.4% fail on Rbt
          • 4.1% fail on Service brake performance
          • 1.4% fail on Service brake imbalance
      • 1.4% fail on Service Brake Efficiency (sp)
        • 1.4% fail on Rbt (sp)
          • 1.4% fail on Service brake imbalance
      • 1.4% fail on Parking brake performance
        • 1.4% fail on Rbt
          • 1.4% fail on Parking brake performance
    • 2.7% fail on Rigid brake pipes
    • 1.4% fail on Service brake pedal or hand lever
      • 1.4% fail on Hand lever
    • 1.4% fail on Flexible brake hoses
    • 1.4% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.4% fail on Hydraulic brake cylinder
    • 1.4% fail on Mechanical brake components
      • 1.4% fail on Brake linings and pads
        • 1.4% fail on Brake pads
  • 19% fail on Suspension
    • 9.5% fail on Component mounting prescribed areas
    • 6.8% fail on Suspension arms
      • 4.1% fail on Ball joint dust cover
      • 2.7% fail on Suspension arm
      • 1.4% fail on Ball joint
    • 5.4% fail on Wheel bearings
    • 2.7% fail on Springs
      • 2.7% fail on Coil springs
        • 2.7% fail on Coil spring
    • 1.4% fail on Anti-roll bars
      • 1.4% fail on Pins and bushes
    • 1.4% fail on Other suspension component
      • 1.4% fail on Pins and bushes
  • 12% fail on Visibility
    • 6.8% fail on Washers
    • 5.4% fail on Wipers
  • 9.5% fail on Body, chassis, structure
    • 2.7% fail on Towbar
      • 1.4% fail on Other towbar components
      • 1.4% fail on Vehicle structure
    • 1.4% fail on Integral vehicle structure
      • 1.4% fail on Integral vehicle structure condition
    • 1.4% fail on Chassis
      • 1.4% fail on Chassis condition
    • 1.4% fail on Exhaust system
    • 1.4% fail on Fuel system
      • 1.4% fail on Pipe
    • 1.4% fail on Doors
      • 1.4% fail on Front passenger's door
        • 1.4% fail on Door condition
    • 1.4% fail on Floor
    • 1.4% fail on Seats
      • 1.4% fail on Driver's seat
      • 1.4% fail on Passenger's seat
  • 8.1% fail on Steering
    • 5.4% fail on Steering gear
      • 5.4% fail on Steering rack
    • 2.7% fail on Steering linkage components
      • 2.7% fail on Track rod end
  • 5.4% fail on Noise, emissions and leaks
    • 5.4% fail on Exhaust emissions
      • 5.4% fail on Spark ignition
        • 5.4% fail on Non catalyst emissions
  • 5.4% fail on Tyres
    • 2.7% fail on Condition
    • 2.7% fail on Tread depth
  • 1.4% fail on Identification of the vehicle
    • 1.4% fail on Registration plates
  • 1.4% fail on Speedometer and speed limiter
    • 1.4% fail on Speedometer
  • 1.4% fail on Seat belts and supplementary restraint systems
    • 1.4% fail on Seat belts
      • 1.4% fail on Prescribed areas