LDV Maxus MOT Results

Registered in 2010
64.6% pass rate
from 82 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 vans and highlighted areas where the LDV Maxus is unusually good or bad.

  • 17% fail on Lamps, reflectors and electrical equipment
    • 3.7% fail on Front and rear fog lamps
      • 3.7% fail on Rear fog lamp
        • 3.7% fail on Rear fog lamp
    • 3.7% fail on Reversing lamps (4 times worse than other 2010 vans)
      • 3.7% fail on Reversing lamps (5 times worse than other 2010 vans)
    • 2.4% fail on Headlamps
      • 2.4% fail on Headlamp
    • 2.4% fail on Headlamp aim
      • 2.4% fail on Headlamp aim
    • 2.4% fail on Position lamps
      • 2.4% fail on Position lamp
    • 2.4% fail on Rear reflectors (6 times worse than other 2010 vans)
    • 1.2% fail on Stop lamp
    • 1.2% fail on Registration plate lamp(s)
    • 1.2% fail on Electrical equipment
      • 1.2% fail on Battery(ies)
  • 15% fail on Brakes
    • 12% fail on Brake performance
      • 7.3% fail on Parking brake efficiency (sp)
        • 7.3% fail on Rbt (sp)
      • 6.1% fail on Service brake performance (2 times worse than other 2010 vans)
        • 6.1% fail on Rbt (2 times worse than other 2010 vans)
          • 4.9% fail on Service brake performance
          • 1.2% fail on Service brake imbalance
      • 4.9% fail on Parking brake performance
        • 3.7% fail on Rbt
          • 3.7% fail on Parking brake performance
        • 1.2% fail on Plate brake tester
          • 1.2% fail on Parking (secondary brake performance)
      • 2.4% fail on Service Brake Efficiency (sp)
        • 2.4% fail on Rbt (sp)
          • 2.4% fail on Service brake performance
          • 1.2% fail on Service brake imbalance
    • 3.7% fail on Mechanical brake components
      • 2.4% fail on Brake linings and pads
        • 2.4% fail on Brake pads
      • 1.2% fail on Brake cables, rods, levers and linkages
        • 1.2% fail on Pivot
    • 1.2% fail on Parking brake control
      • 1.2% fail on Lever
    • 1.2% fail on Rigid brake pipes
  • 15% fail on Noise, emissions and leaks (150% worse than other 2010 vans)
    • 15% fail on Exhaust emissions (170% worse than other 2010 vans)
      • 11% fail on Compression ignition (150% worse than other 2010 vans)
        • 7.3% fail on Malfunction indicator lamp (2 times worse than other 2010 vans)
        • 2.4% fail on On or after 01/07/2008
        • 2.4% fail on Emissions not tested (6 times worse than other 2010 vans)
        • 1.2% fail on Pre 01/07/2008 Turbo
      • 3.7% fail on Spark ignition
        • 3.7% fail on Malfunction indicator lamp
  • 13% fail on Suspension
    • 7.3% fail on Suspension arms
      • 4.9% fail on Ball joint
      • 3.7% fail on Ball joint dust cover (6 times worse than other 2010 vans)
      • 1.2% fail on Pins and bushes
    • 3.7% fail on Shock absorbers
    • 1.2% fail on Wheel bearings
    • 1.2% fail on Macpherson strut
      • 1.2% fail on Attachment bracket and mounting
    • 1.2% fail on Anti-roll bars
      • 1.2% fail on Linkage
    • 1.2% fail on Other suspension component
      • 1.2% fail on Ball joint
  • 11% fail on Visibility
    • 7.3% fail on Wipers
    • 2.4% fail on Washers
    • 1.2% fail on Driver's view
  • 3.7% fail on Steering
    • 2.4% fail on Steering linkage components
      • 2.4% fail on Track rod end
    • 1.2% fail on Steering gear
      • 1.2% fail on Steering rack
  • 3.7% fail on Body, chassis, structure
    • 3.7% fail on Transmission
      • 3.7% fail on Drive shafts
        • 3.7% fail on Joints
    • 1.2% fail on Doors
      • 1.2% fail on Other passenger's door
        • 1.2% fail on Door condition
  • 2.4% fail on Tyres
    • 2.4% fail on Tread depth