MOT Results

Honest John Vans MOT Results » LDV » Convoy » 1996

LDV Convoy MOT Results

Registered in 1996
68.6% pass rate
from 35 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 vans and highlighted areas where the LDV Convoy is unusually good or bad.

  • 23% fail on Body, chassis, structure
    • 8.6% fail on Chassis
      • 8.6% fail on Chassis condition
    • 5.7% fail on Exhaust system
    • 5.7% fail on Doors (5 times worse than other 1996 vans)
      • 5.7% fail on Driver's door (11 times worse than other 1996 vans)
        • 5.7% fail on Door condition (12 times worse than other 1996 vans)
    • 5.7% fail on Seats (7 times worse than other 1996 vans)
      • 5.7% fail on Passenger's seat (26 times worse than other 1996 vans)
    • 2.9% fail on Integral vehicle structure
      • 2.9% fail on Integral vehicle structure condition
    • 2.9% fail on Fuel system
      • 2.9% fail on Fuel cap/sealing device
    • 2.9% fail on Transmission
      • 2.9% fail on Prop shafts
        • 2.9% fail on Prop shaft
    • 2.9% fail on Body
      • 2.9% fail on Other body component
  • 17% fail on Brakes
    • 17% fail on Brake performance
      • 14% fail on Service Brake Efficiency (sp)
        • 11% fail on Rbt (sp)
          • 8.6% fail on Service brake imbalance
          • 2.9% fail on Service brake performance
        • 2.9% fail on Decelerometer (sp)
      • 8.6% fail on Parking brake efficiency (sp)
        • 5.7% fail on Rbt (sp)
        • 2.9% fail on Decelerometer (sp)
      • 2.9% fail on Service brake performance
        • 2.9% fail on Rbt
          • 2.9% fail on Service brake performance
      • 2.9% fail on Brake performance not tested
      • 2.9% fail on Parking brake performance
        • 2.9% fail on Rbt
          • 2.9% fail on Parking brake performance
    • 2.9% fail on Rigid brake pipes
    • 2.9% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 2.9% fail on Hydraulic brake cylinder
    • 2.9% fail on Load sensing valves
    • 2.9% fail on Other components and prescribed areas
      • 2.9% fail on Prescribed areas
        • 2.9% fail on Park brake mechanism/associated mountings
    • 2.9% fail on Mechanical brake components
      • 2.9% fail on Brake linings and pads
        • 2.9% fail on Brake linings
  • 14% fail on Steering
    • 8.6% fail on Prescribed areas (137 times worse than other 1996 vans)
    • 8.6% fail on Steering linkage components
      • 8.6% fail on Track rod end
    • 2.9% fail on Power steering
      • 2.9% fail on Operation
  • 11% fail on Visibility
    • 11% fail on Wipers
    • 2.9% fail on View to rear
      • 2.9% fail on Mirrors
  • 11% fail on Lamps, reflectors and electrical equipment
    • 5.7% fail on Electrical equipment
      • 2.9% fail on Battery(ies)
      • 2.9% fail on Horn
    • 2.9% fail on Headlamp aim
      • 2.9% fail on Headlamp aim
    • 2.9% fail on Front and rear fog lamps
      • 2.9% fail on Rear fog lamp
        • 2.9% fail on Rear fog lamp
    • 2.9% fail on Registration plate lamp(s)
  • 11% fail on Suspension
    • 11% fail on Component mounting prescribed areas
    • 2.9% fail on Wheel bearings
  • 8.6% fail on Seat belts and supplementary restraint systems
    • 8.6% fail on Seat belts
      • 8.6% fail on Prescribed areas
  • 8.6% fail on Noise, emissions and leaks
    • 8.6% fail on Exhaust emissions
      • 5.7% fail on Compression ignition
        • 2.9% fail on Pre 01/07/2008 Turbo
        • 2.9% fail on Pre 01/07/2008 Non turbo
      • 2.9% fail on Spark ignition
        • 2.9% fail on Emissions not tested
  • 8.6% fail on Tyres
    • 5.7% fail on Condition
    • 2.9% fail on Tread depth
  • 2.9% fail on Identification of the vehicle
    • 2.9% fail on Registration plates